Free field representation of Toda field theories

We study the following problem: can a classical $sl_n$ Toda field theory be represented by means of free bosonic oscillators through a Drinfeld--Sokolov construction? We answer affirmatively in the case of a cylindrical space--time and for real hyperbolic solutions of the Toda field equations. We establish in fact a one--to--one correspondence between such solutions and the space of free left and right bosonic oscillators with coincident zero modes. We discuss the same problem for real singular solutions with non hyperbolic monodromy.Comment: 29 pages, Latex, SISSA-ISAS 210/92/E

Bioimprint Mediated Label-Free Isolation of Pancreatic Tumor Cells from a Healthy Peripheral Blood Cell Population

New techniques are required for earlier diagnosis and response to treatment of pancreatic cancer. Here, a label-free approach is reported in which circulating pancreatic tumor cells are isolated from healthy peripheral blood cells via cell bioimprinting technology. The method involves pre-fabrication of pancreatic cell layers and sequential casting of cell surfaces with a series of custom-made resins to produce negative cell imprints. The imprint is functionalized with a combination of polymers to engineer weak attraction to the cells which is further amplified by the increased area of contact with the matching cells. A flow-through bioimprint chip is designed and tested for selectivity toward two pancreatic tumor cell lines, ASPC-1 and Mia-PaCa-2. Healthy human peripheral blood mononuclear cells (PBMCs) are spiked with pancreatic tumor cells at various concentrations. Bioimprints are designed for preferential retention of the matching pancreatic tumor cells and with respect to PBMCs. Tumor bioimprints are capable of capturing and concentrating pancreatic tumor cells from a mixed cell population with increased retention observed with the number of seedings. ASPC-1 bioimprints preferentially retain both types of pancreatic tumor cells. This technology could be relevant for the collection and interrogation of liquid biopsies, early detection, and relapse monitoring of pancreatic cancer patients

Adsorption of shape-anisotropic and porous particles at the air–water and the decane–water interface studied by the gel trapping technique

We have studied the attachment and orientation of anisotropic and porous microparticles at liquid surfaces by using the gel trapping technique (GTT). This technique involves spreading of the microparticles of interest at the liquid interface, subsequent setting of the aqueous phase to a hydrogel thus "arresting" the particle positions at the liquid surface, and further replication of the hydrogel surface with curable polydymethilsiloxane (PDMS). The advantage of the GTT comes from the possibility to look at the PDMS replica with scanning electron microscopy (SEM) or atomic force microscopy (AFM), which allows even sub-micrometer particles to be studied at the air-water and the oil-water interface. Here we report our results on the adsorption of non-spherical anisotropic particles at liquid surfaces using the GTT. Although the GTT was originally designed to measure three-phase contact angles of spherical colloid particles, here we used this technique to reveal the orientation of a variety of shape-anisotropic and porous microparticles of practical interest at both the air-water and decane-water interfaces. We show results on typical attachment and orientation of needle-like (aragonite), rhombohedra-like (calcite) microcrystals, ethyl cellulose micro-rods, as well as highly porous hydrophilic and hydrophobic silica microparticles at these liquid interfaces. The results are important for understanding the adsorption behaviour of shape-anisotropic particles as well as porous microparticles which are used in industrial formulations as fillers, foam stabilisers and emulsifiers. © 2014 The Royal Society of Chemistry

Interfacing Living Unicellular Algae Cells with Biocompatible Polyelectrolyte-Stabilised Magnetic Nanoparticles

Green algae are a promising platform for the development of biosensors and bioelectronic devices. Here we report a reliable single-step technique for the functionalisation of living unicellular green algae Chlorella pyrenoidosa with biocompatible 15 nm superparamagnetic nanoparticles stabilised with poly(allylamine hydrochloride). The magnetised algae cells can be manipulated and immobilised using external permanent magnets. The distribution of the nanoparticles on the cell walls of C. pyrenoidosa was studied by optical and fluorescence microscopy, TEM, SEM and EDX spectroscopy. The viability and the magnetic properties of the magnetised algae are studied in comparison with the native cells. The technique may find a number of potential applications in biotechnology and bioelectronics.We report the functionalisation of viable algae C. pyrenoidosa cells with biocompatible polyelectrolyte-stabilised superparamagnetic nanoparticles via a single-step direct deposition. This study demonstrates that the living magnetised algae cells are susceptible for the spatial manipulation with a permanent magnet, opening new avenues for a number of practical applications, including the fabrication of whole-cell biosensors. Copyright © 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

Sound transmission loss of hierarchically porous composites produced by hydrogel templating and viscous trapping techniques

© 2017 the Partner Organisations. We have developed two different methods for fabrication of hierarchically porous composites which are environmentally friendly, inexpensive and give a large amount of control over the composite microstructure. The hydrogel bead templating method involved introducing a slurry of hydrogel beads as templates into a gypsum slurry that, upon drying, left pores reflecting their size. The overall porosity reflected the volume percentage of hydrogel bead slurry used. Using mixtures of large and small hydrogel beads in controlled volume ratios as templates, we produced hierarchically porous gypsum composites that had tailorable microstructures at the same overall porosity. The viscous trapping method involved utilisation of an aqueous solution of a thickening agent, methylcellulose, during the setting process of an aqueous gypsum slurry. The methylcellulose solution traps the hydrated gypsum particles in solution and stops their sedimentation as the continuous gypsum network forms, allowing formation of an expanded microstructure. This method allows a good degree of control over the porosity which is directly controlled by the volume percentage of methylcellulose solution used. The mechanical strength of the porous composites decreased as the porosity increased. The composites with smaller pores had increased compressional strength and Young's modulus compared to the ones produced with large pores, at constant porosity. The hierarchically porous gypsum composites showed an intermediate Young's modulus and an increased compressional strength. We also studied the sound transmission loss of these hierarchically porous composites. We found that the ones produced by the viscous trapping method had a lower sound transmission loss over the frequency range investigated as the overall porosity was increased. We demonstrated the effect of the composite pore size at a constant porosity on the sound transmission loss. Our experiments showed that porous composites with large pores showed increased sound transmission loss at lower sound frequencies compared to those with small pores. As the sound frequency increased, the difference between their STL spectra decreased and at the higher frequency range (>2420 Hz) the composites with smaller pores began to perform better. The hierarchically porous composite had an intermediate STL spectrum, suggesting a way of tailoring the hierarchically porous structure at constant porosity to achieve desired sound insulating properties at certain frequencies

Direct measurements of the effects of salt and surfactant on interaction forces between colloidal particles at water-oil interfaces

The forces between colloidal particles at a decane-water interface, in the presence of low concentrations of a monovalent salt (NaCl) and of the surfactant sodium dodecylsulfate (SDS) in the aqueous subphase, have been studied using laser tweezers. In the absence of electrolyte and surfactant, particle interactions exhibit a long-range repulsion, yet the variation of the interaction for different particle pairs is found to be considerable. Averaging over several particle pairs was hence found to be necessary to obtain reliable assessment of the effects of salt and surfactant. It has previously been suggested that the repulsion is consistent with electrostatic interactions between a small number of dissociated charges in the oil phase, leading to a decay with distance to the power -4 and an absence of any effect of electrolyte concentration. However, the present work demonstrates that increasing the electrolyte concentration does yield, on average, a reduction of the magnitude of the interaction force with electrolyte concentration. This implies that charges on the water side also contribute significantly to the electrostatic interactions. An increase in the concentration of SDS leads to a similar decrease of the interaction force. Moreover the repulsion at fixed SDS concentrations decreases over longer times. Finally, measurements of three-body interactions provide insight into the anisotropic nature of the interactions. The unique time-dependent and anisotropic interactions between particles at the oil-water interface allow tailoring of the aggregation kinetics and structure of the suspension structure.Comment: Submitted to Langmui

An environmentally benign antimicrobial nanoparticle based on a silver-infused lignin core

Silver nanoparticles have antibacterial properties, but their use has been a cause for concern because they persist in the environment. Here, we show that lignin nanoparticles infused with silver ions and coated with a cationic polyelectrolyte layer form a biodegradable and green alternative to silver nanoparticles. The polyelectrolyte layer promotes the adhesion of the particles to bacterial cell membranes and, together with silver ions, can kill a broad spectrum of bacteria, including Escherichia coli, Pseudomonas aeruginosa and quaternary-amine-resistant Ralstonia sp. Ion depletion studies have shown that the bioactivity of these nanoparticles is time-limited because of the desorption of silver ions. High-throughput bioactivity screening did not reveal increased toxicity of the particles when compared to an equivalent mass of metallic silver nanoparticles or silver nitrate solution. Our results demonstrate that the application of green chemistry principles may allow the synthesis of nanoparticles with biodegradable cores that have higher antimicrobial activity and smaller environmental impact than metallic silver nanoparticles

Non-monotonic variation with salt concentration of the second virial coefficient in protein solutions

The osmotic virial coefficient $B_2$ of globular protein solutions is calculated as a function of added salt concentration at fixed pH by computer simulations of the ``primitive model''. The salt and counter-ions as well as a discrete charge pattern on the protein surface are explicitly incorporated. For parameters roughly corresponding to lysozyme, we find that $B_2$ first decreases with added salt concentration up to a threshold concentration, then increases to a maximum, and then decreases again upon further raising the ionic strength. Our studies demonstrate that the existence of a discrete charge pattern on the protein surface profoundly influences the effective interactions and that non-linear Poisson Boltzmann and Derjaguin-Landau-Verwey-Overbeek (DLVO) theory fail for large ionic strength. The observed non-monotonicity of $B_2$ is compared to experiments. Implications for protein crystallization are discussed.Comment: 43 pages, including 17 figure

From harmful Microcystis blooms to multi-functional core-double-shell microsphere bio-hydrochar materials

Harmful algal blooms (HABs) induced by eutrophication is becoming a serious global environmental problem affecting public health and aquatic ecological sustainability. A novel strategy for the utilization of biomass from HABs was developed by converting the algae cells into hollow mesoporous biohydrochar microspheres via hydrothermal carbonization method. The hollow microspheres were used as microreactors and carriers for constructing CaO2 core-mesoporous shell-CaO2 shell microspheres (OCRMs). The CaO2 shells could quickly increase dissolved oxygen to extremely anaerobic water in the initial 40 min until the CaO2 shells were consumed. The mesoporous shells continued to act as regulators restricting the release of oxygen from CaO2 cores. The oxygen-release time using OCRMs was 7 times longer than when directly using CaO2. More interestingly, OCRMs presented a high phosphate removal efficiency (95.6%) and prevented the pH of the solution from rising to high levels in comparison with directly adding CaO2 due to the OH− controlled-release effect of OCRMs. The distinct core-doubleshell micro/nanostructure endowed the OCRMs with triple functions for oxygen controlled-release, phosphorus removal and less impact on water pH. The study is to explore the possibility to prepare smarter bio-hydrochar materials by utilizing algal blooms

“A long-term mortality analysis of subsidized firms in rural areas: an empirical study in the Portuguese Alentejo region”

Studies have demonstrated that public policies to support private firms’ investment have the ability to promote entrepreneurship, but the sustainability of subsidized firms has not often been analysed. This paper aims to examine this dimension specifically through evaluating the mortality of subsidized firms in the long-term. The analysis focuses on a case study of the LEADER+ Programme in the Alentejo region of Portugal. With this purpose, the paper examines the activity status (active or not active) of 154 private, rural, for-profit firms in Alentejo that had received a subsidy to support investment between 2002 and 2008 under the LEADER+ Programme. The methodology is based on binary choice models in order to study the probability of these firms still being active. The explanatory variables used are the following: (1) the characteristics of entrepreneurs and managers’ strategic decisions, (2) firm profile and characteristics, (3) regional economic environment. Data assessment showed that the cumulative mortality rate of firms on 31st December 2013 is over 20 %. Interpretation of the regression model revealed that he probability of firms’ survival increases with higher investment, firm age and regional business concentration, whereas the number of applications made by firms has a negative impact on their survival. So it seems that for subsidized firms the amount of investment is as important as its frequency