3,899 research outputs found
Parametric analysis of closed cycle magnetohydrodynamic (MHD) power plants
A parametric analysis of closed cycle MHD power plants was performed which studied the technical feasibility, associated capital cost, and cost of electricity for the direct combustion of coal or coal derived fuel. Three reference plants, differing primarily in the method of coal conversion utilized, were defined. Reference Plant 1 used direct coal fired combustion while Reference Plants 2 and 3 employed on site integrated gasifiers. Reference Plant 2 used a pressurized gasifier while Reference Plant 3 used a ""state of the art' atmospheric gasifier. Thirty plant configurations were considered by using parametric variations from the Reference Plants. Parametric variations include the type of coal (Montana Rosebud or Illinois No. 6), clean up systems (hot or cold gas clean up), on or two stage atmospheric or pressurized direct fired coal combustors, and six different gasifier systems. Plant sizes ranged from 100 to 1000 MWe. Overall plant performance was calculated using two methodologies. In one task, the channel performance was assumed and the MHD topping cycle efficiencies were based on the assumed values. A second task involved rigorous calculations of channel performance (enthalpy extraction, isentropic efficiency and generator output) that verified the original (task one) assumptions. Closed cycle MHD capital costs were estimated for the task one plants; task two cost estimates were made for the channel and magnet only
Government financial support for civil aircraft research, technology and development in four European countries and the United States
Data on the levels of government financial support for civil aircraft airframe and engine (CAAE) research and technology (R&T) in the United States and Europe (United Kingdom, West Germany, France and The Netherlands) and means of comparing these levels are provided. Data are presented for the years 1974-1977. European R&T expenditure data were obtained through visits to each of the four European countries, to the Washington office of the European Communities, and by a search of applicable literature. CAAE R&T expenditure data for the United States were obtained from NASA and Federal Aviation Administration (FAA)
Problems in the Theory of Convergence Spaces
We investigate several problems in the theory of convergence spaces: generalization of Kolmogorov separation from topological spaces to convergence spaces, representation of reflexive digraphs as convergence spaces, construction of differential calculi on convergence spaces, mereology on convergence spaces, and construction of a universal homogeneous pretopological space. First, we generalize Kolmogorov separation from topological spaces to convergence spaces; we then study properties of Kolmogorov spaces. Second, we develop a theory of reflexive digraphs as convergence spaces, which we then specialize to Cayley graphs. Third, we conservatively extend the concept of differential from the spaces of classical analysis to arbitrary convergence spaces; we then use this extension to obtain differential calculi for finite convergence spaces, finite Kolmogorov spaces, finite groups, Boolean hypercubes, labeled graphs, the Cantor tree, and real and binary sequences. Fourth, we show that a standard axiomatization of mereology is equivalent to the condition that a topological space is discrete, and consequently, any model of general extensional mereology is indistinguishable from a model of set theory; we then generalize these results to the cartesian closed category of convergence spaces. Finally, we show that every convergence space can be embedded into a homogeneous convergence space; we then use this result to construct a universal homogeneous pretopological space
Method and apparatus for attaching physiological monitoring electrodes Patent
Adhesive spray process for attaching biomedical skin electrode
Sources of Recreational and Community Conflict from Tourism in Moab, Utah
A written survey of 200 Moab residents was used to measure residents\u27 attitudes 11 toward tourism. Three regression models were developed using variables identified in the tourism literature to measure the relative importance of interpersonal contacts with tourists, negative impacts to outdoor-recreation experiences, and community experience in predicting attitudes toward tourism. Interpersonal contacts and recreation impacts both had fairly high predictive capabilities. It was concluded that interactions between recreation visitors/tourists and local residents should be a focus of further research.
Data from the Moab resident survey were also used in conjunction with a survey of mountain bikers visiting or living in the Moab area and interviews with IO community leaders to document and explain the dynamics of conflicts between recreationists and community residents. It was hypothesized from anecdotal evidence that Moab residents would ascribe more negative economic and environmental impacts to mountain bikers than to other major recreation user groups in the area and that conflicts between the two groups would be asymmetric in nature. It was also hypothesized that measurements of institutional overload would be correlated to perceptions of recreation conflict. Findings from survey data supported all of these hypotheses.
Conflicts reported in this study can be partially attributed to lifestyle intolerance and resource specificity (recreation concepts), as well as institutional overload and culture clash (community sociology concepts). The interaction between recreation conflict and sociocultural impacts at the community level indicate the need for a more comprehensive concept of recreation conflict beyond the historic focus upon on-site conflicts between recreation user groups
Nanoscale electrochemistry of sp2 carbon materials: from graphite and graphene to carbon nanotubes
Carbon materials have a long history of use as electrodes in electrochemistry, from (bio)electroanalysis to applications in energy technologies, such as batteries and fuel cells. With the advent of new forms of nanocarbon, particularly, carbon nanotubes and graphene, carbon electrode materials have taken on even greater significance for electrochemical studies, both in their own right and as components and supports in an array of functional composites.
With the increasing prominence of carbon nanomaterials in electrochemistry comes a need to critically evaluate the experimental framework from which a microscopic understanding of electrochemical processes is best developed. This Account advocates the use of emerging electrochemical imaging techniques and confined electrochemical cell formats that have considerable potential to reveal major new perspectives on the intrinsic electrochemical activity of carbon materials, with unprecedented detail and spatial resolution. These techniques allow particular features on a surface to be targeted and models of structure–activity to be developed and tested on a wide range of length scales and time scales.
When high resolution electrochemical imaging data are combined with information from other microscopy and spectroscopy techniques applied to the same area of an electrode surface, in a correlative-electrochemical microscopy approach, highly resolved and unambiguous pictures of electrode activity are revealed that provide new views of the electrochemical properties of carbon materials. With a focus on major sp2 carbon materials, graphite, graphene, and single walled carbon nanotubes (SWNTs), this Account summarizes recent advances that have changed understanding of interfacial electrochemistry at carbon electrodes including: (i) Unequivocal evidence for the high activity of the basal surface of highly oriented pyrolytic graphite (HOPG), which is at least as active as noble metal electrodes (e.g., platinum) for outer-sphere redox processes. (ii) Demonstration of the high activity of basal plane HOPG toward other reactions, with no requirement for catalysis by step edges or defects, as exemplified by studies of proton-coupled electron transfer, redox transformations of adsorbed molecules, surface functionalization via diazonium electrochemistry, and metal electrodeposition. (iii) Rationalization of the complex interplay of different factors that determine electrochemistry at graphene, including the source (mechanical exfoliation from graphite vs chemical vapor deposition), number of graphene layers, edges, electronic structure, redox couple, and electrode history effects. (iv) New methodologies that allow nanoscale electrochemistry of 1D materials (SWNTs) to be related to their electronic characteristics (metallic vs semiconductor SWNTs), size, and quality, with high resolution imaging revealing the high activity of SWNT sidewalls and the importance of defects for some electrocatalytic reactions (e.g., the oxygen reduction reaction). The experimental approaches highlighted for carbon electrodes are generally applicable to other electrode materials and set a new framework and course for the study of electrochemical and interfacial processes
Functional Integration of Ecological Networks through Pathway Proliferation
Large-scale structural patterns commonly occur in network models of complex
systems including a skewed node degree distribution and small-world topology.
These patterns suggest common organizational constraints and similar functional
consequences. Here, we investigate a structural pattern termed pathway
proliferation. Previous research enumerating pathways that link species
determined that as pathway length increases, the number of pathways tends to
increase without bound. We hypothesize that this pathway proliferation
influences the flow of energy, matter, and information in ecosystems. In this
paper, we clarify the pathway proliferation concept, introduce a measure of the
node--node proliferation rate, describe factors influencing the rate, and
characterize it in 17 large empirical food-webs. During this investigation, we
uncovered a modular organization within these systems. Over half of the
food-webs were composed of one or more subgroups that were strongly connected
internally, but weakly connected to the rest of the system. Further, these
modules had distinct proliferation rates. We conclude that pathway
proliferation in ecological networks reveals subgroups of species that will be
functionally integrated through cyclic indirect effects.Comment: 29 pages, 2 figures, 3 tables, Submitted to Journal of Theoretical
Biolog
Monte Carlo planning for active object classification
© 2017, Springer Science+Business Media New York. Classifying objects in complex unknown environments is a challenging problem in robotics and is fundamental in many applications. Modern sensors and sophisticated perception algorithms extract rich 3D textured information, but are limited to the data that are collected from a given location or path. We are interested in closing the loop around perception and planning, in particular to plan paths for better perceptual data, and focus on the problem of planning scanning sequences to improve object classification from range data. We formulate a novel time-constrained active classification problem and propose solution algorithms that employ a variation of Monte Carlo tree search to plan non-myopically. Our algorithms use a particle filter combined with Gaussian process regression to estimate joint distributions of object class and pose. This estimator is used in planning to generate a probabilistic belief about the state of objects in a scene, and also to generate beliefs for predicted sensor observations from future viewpoints. These predictions consider occlusions arising from predicted object positions and shapes. We evaluate our algorithms in simulation, in comparison to passive and greedy strategies. We also describe similar experiments where the algorithms are implemented online, using a mobile ground robot in a farm environment. Results indicate that our non-myopic approach outperforms both passive and myopic strategies, and clearly show the benefit of active perception for outdoor object classification
- …