42,446 research outputs found
An experimental and theoretical study of the flow phenomena within a vortex sink rate sensor
Tests were conducted to obtain a description of the flow field within a vortex sink rate sensor and to observe the influence of viscous effects on its performance. The characteristics of the sensor are described. The method for conducting the test is reported. It was determined that for a specific mass flow rate and the geometry of the vortex chamber, the flow in the vortex chamber was only affected, locally, by the size of the sink tube diameter. Within the sink tube, all three velocity components were found to be higher for the small sink tube diameters. As the speed of rotation of the sensor was increased, the tangential velocities within the vortex chamber, as well as in the sink tube, increased in proportion to the speed of rotation
Recommended from our members
Atmospheric modelling for NOMAD-UVIS on board the ExoMars Trace Gas Orbiter mission
The Ultraviolet and Visible Spectrometer (UVIS) instrument development process requires the construction of an atmospheric model to provide synthetic UV transmission spectra. We discuss the requirements of the model to enable observational limits to be found, and the potential for certain atmospheric parameters to be further constrained
Expression and regulation of Cek-8, a cell to cell signalling receptor in developing chick limb buds
Techniques for the Synthesis of Reversible Toffoli Networks
This paper presents novel techniques for the synthesis of reversible networks
of Toffoli gates, as well as improvements to previous methods. Gate count and
technology oriented cost metrics are used. Our synthesis techniques are
independent of the cost metrics. Two new iterative synthesis procedure
employing Reed-Muller spectra are introduced and shown to complement earlier
synthesis approaches. The template simplification suggested in earlier work is
enhanced through introduction of a faster and more efficient template
application algorithm, updated (shorter) classification of the templates, and
presentation of the new templates of sizes 7 and 9. A novel ``resynthesis''
approach is introduced wherein a sequence of gates is chosen from a network,
and the reversible specification it realizes is resynthesized as an independent
problem in hopes of reducing the network cost. Empirical results are presented
to show that the methods are effective both in terms of the realization of all
3x3 reversible functions and larger reversible benchmark specifications.Comment: 20 pages, 5 figure
Recommended from our members
Radiative transfer modelling for the NOMAD-UVIS instrument on the ExoMars Trace Gas Orbiter mission
The NOMAD (Nadir and Occultation for MArs Discovery) instrument is a 3-channel (2 IR, 1 UV/Vis) spectrometer due to fly on the 2016 ExoMars Trace Gas Orbiter mission. A radiative transfer model for Mars has been developed providing synthetic spectra to simulate observations of the UVIS channel in both solar occultation and nadir viewing geometries. This will allow for the characterization and mitigation of the influence of dust on retrievals of ozone abundance
Development of automatic and manual flight director landing systems for the XV-15 tilt rotor aircraft in helicopter mode
The objective of this effort is to determine IFR approach path and touchdown dispersions for manual and automatic XV-15 tilt rotor landings, and to develop missed approach criteria. Only helicopter mode XV-15 operation is considered. The analysis and design sections develop the automatic and flight director guidance equations for decelerating curved and straight-in approaches into a typical VTOL landing site equipped with an MLS navigation aid. These system designs satisfy all known pilot-centered, guidance and control requirements for this flying task. Performance data, obtained from nonstationary covariance propagation dispersion analysis for the system, are used to develop the approach monitoring criteria. The autoland and flight director guidance equations are programmed for the VSTOLAND 1819B digital computer. The system design dispersion data developed through analysis and the 1819B digital computer program are verified and refined using the fixed-base, man-in-the-loop XV-15 VSTOLAND simulation
Breakdown Voltage of the AC coupling oxide for a VELO sensor
The LHCb VELO sensors were systematically tested for their current-voltage (IV) characteristics, depletion voltage and problem channels [1]. Below we describe additional tests which measured the voltage at which the AC coupling oxide breaks down. As these tests are, by necessity, destructive only one sensor was fully characterized this way. For production purposes all sensors had each strip measured and the breakdown voltage is known to be > 40V /strip. The measurement of the breakdown voltage is especially important as it enables some estimates to be made of to be made of the tolerance of the VELO modules to intense beam spills
The H1 Forward Track Detector at HERA II
In order to maintain efficient tracking in the forward region of H1 after the
luminosity upgrade of the HERA machine, the H1 Forward Track Detector was also
upgraded. While much of the original software and techniques used for the HERA
I phase could be reused, the software for pattern recognition was completely
rewritten. This, along with several other improvements in hit finding and
high-level track reconstruction, are described in detail together with a
summary of the performance of the detector.Comment: Minor revision requested by journal (JINST) edito
- …