Study and development of ultrasound monitoring of skeletal defects

Fatigue fractures are fine disruptions of normal bone architecture whose identification is often unreliable or difficult using x-rays (Robinson, Wilson et al.; Kundel 2004; Swischuk and Hernandez 2004). A fatigue fracture results from the application of abnormal loads to a bone with normal elastic resistance and is associated with new or different activity, and strenuous or repeated activity. The feasibility of using ultrasound to detect and monitor fatigue fractures and other structural damage in bone was established in this study. The use of Low Transient Pulse (LTP) technology to drive the ultrasound transducers proved to enhance detection resolution and quality of the ultrasound signal in comparison to the use of conventional rectangular drive pulse. Sawbone plates mimicking the properties of cortical bone and cancellous bone were used to create limb phantoms with different cut depths. A series of tests were conducted on these phantoms using Low Transient Pulse technology to demonstrate which design setup and signal parameters would maximize the sensitivity and specificity of the detection of fractures. Final experiments were carried out on sheep tibia simulating different fracture depths to prove the ability of ultrasound to detect fractures in an actual physiological environment

Wurster fluidised bed coating of microparticles: Towards scalable production of oral sustained-release liquid medicines for patients with swallowing difficulties

© 2019 The Author(s). This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.Suspension of microparticles in an easy-to-swallow liquid is one approach to develop sustained-release formulations for children and patients with swallowing difficulties. However, to date production of sustained-release microparticles at the industrial scale has proven to be challenging. The aim of this investigation was to develop an innovative concept in coating sustained-release microparticles using industrial scalable Wurster fluidised bed to produce oral liquid suspensions. Microcrystalline cellulose cores (particle size < 150 µm) were coated with Eudragit® NM 30 D and Eudragit® RS/RL 30 D aqueous dispersions using a fluidised bed coater. A novel approach of periodic addition of a small quantity (0.1% w/w) of dry powder glidant, magnesium stearate, to the coating chamber via an external port was applied throughout the coating process. This method significantly increased coating production yield from less than 50% to up to 99% compared to conventional coating process without the dry powder glidant. Powder rheology tests showed that dry powder glidants increased the tapped density and decreased the cohesive index of coated microparticles. Reproducible microencapsulation of a highly water-soluble drug, metoprolol succinate, was achieved, yielding coated microparticles less than 200 µm in size with 20-hour sustained drug release, suitable for use in liquid suspensions. The robust, scalable technology presented in this study offers an important solution to the long-standing challenges of formulating sustained-release dosage forms suitable for children and older people with swallowing difficulties.Peer reviewedFinal Published versio

Easy to Swallow “Instant” Jelly Formulations for Sustained Release Gliclazide Delivery

© 2020 The Authors. Published by Elsevier Inc. on behalf of the American Pharmacists Association®. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).It is a challenge to safely administer sustained release medicines to patients with dysphagia. Sustained release tablets must not be crushed and multiparticulates with large particle sizes cause gritiness reducing patient acceptability. The aim of this study was to develop “instant” jellies as delivery vehicles incorporating sustained release microparticles for patients with dysphagia. Dry powder mixtures containing gelling agents such as sodium alginate and calcium ions were hydrated in 20 mL of water and formed a jelly texture within 10 min. The “instant” jellies demonstrated comparable properites to commercial “read-to-eat” jellies in appearance, rheological/textural properties and in vitro swallowing performance in an artificial throat model. Gliclazide sustained release microparticles were produced by fluidized bed coating using Eudragit® NM 30 D and achieved 99% production yield and final coated particle size (D50) of 198 4.3 µm. Sustained gliclazide release was achieved over 15 h and the incorporation of the particles into the jellies significantly decreased the drug release rate. This novel drug delivery system offers a patient-centric solution to the long-standing challenge of administering sustained release medicines to patients with dysphagia and can potentially be used for paediatric patients.Peer reviewe

Regulating the pH of bicarbonate solutions without purging gases: Application to dissolution testing of enteric coated tablets, pellets and microparticles

© 2020 Elsevier Ltd. All rights reserved. This manuscript is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International Licence http://creativecommons.org/licenses/by-nc-nd/4.0/.Dissolution media based on bicarbonate buffers closely mimic the environment of intestinal fluids and thus improve in vitro in vivo correlation compared to phosphate buffers. Purging gases into the medium is used as a method to stabilise bicarbonate buffers; however, this causes issues due to the disturbance of the hydrodynamics in the dissolution vessel. The aim of this study was to develop a novel system to regulate and stabilise the pH of bicarbonate buffers without purging gases for the application of dissolution testing of enteric coated products. A novel enclosure system was applied to the USP II dissolution vessel to supply N2 and CO2 gases above the dissolution medium without purging into the solution. Drug release from enteric coated predinisolone microparticles (216.9 µm), pellets (1.25 mm) and commercially available tablets was determined in 0.1 M HCl and subsequently in pH 6.8 phosphate buffer or pH 6.2–6.8 bicarbonate buffers generated by titration of the acidic medium in situ using USP II apparatus. Supplying N2 at 3–4 bar and CO2 at 0.1 bar were able to increase the pH of the bicarbonate buffer from pH 6.2 to 6.8 within 45 min and subsequently stabilise the medium pH at 6.8 ± 0.05 pH units. Enteric coated microparticles showed much faster drug release in the physiological bicarbonate buffers than tablets and pellets. The novel bicarbonate-based dissolution system moves forward the application of the physiological bicarbonate buffers for testing pharmaceutical products to meet compendial requirements.Peer reviewe

Assessing advantages and drawbacks of rapidly generated ultra-large 3d breast cancer spheroids: Studies with chemotherapeutics and nanoparticles

Traditionally, two-dimensional (2D) monolayer cell culture models have been used to study in vitro conditions for their ease of use, simplicity and low cost. However, recently, three-dimensional (3D) cell culture models have been heavily investigated as they provide better physiological relevance for studying various disease behaviors, cellular activity and pharmaceutical interactions. Typically, small-sized tumor spheroid models (100–500 µm) are used to study various biological and physicochemical activities. Larger, millimetric spheroid models are becoming more desirable for simulating native tumor microenvironments (TMEs). Here, we assess the use of ultra-large spheroid models (~2000 µm) generated from scaffolds made from a nozzle-free, ultra-high resolution printer; these models are explored for assessing chemotherapeutic responses with molecular doxorubicin (DOX) and two analogues of Doxil® (Dox-NP®, Doxoves™ ) on MDA-MB-231 and MCF-7 breast cancer cell lines. To provide a comparative baseline, small spheroid models (~500 µm) were developed using a self-aggregation method of MCF-7 breast cancer cell lines, and underwent similar drug treatments. Analysis of both large and small MCF-7 spheroids revealed that Dox-NP tends to have the highest level of inhibition, followed by molecular doxorubicin and then Doxoves. The experimental advantages and drawbacks of using these types of ultra-large spheroids for cancer research are discussed

Molnupiravir plus usual care versus usual care alone as early treatment for adults with COVID-19 at increased risk of adverse outcomes (PANORAMIC): an open-label, platform-adaptive randomised controlled trial

Background: The safety, effectiveness, and cost-effectiveness of molnupiravir, an oral antiviral medication for SARS-CoV-2, has not been established in vaccinated patients in the community at increased risk of morbidity and mortality from COVID-19. We aimed to establish whether the addition of molnupiravir to usual care reduced hospital admissions and deaths associated with COVID-19 in this population. Methods: PANORAMIC was a UK-based, national, multicentre, open-label, multigroup, prospective, platform adaptive randomised controlled trial. Eligible participants were aged 50 years or older—or aged 18 years or older with relevant comorbidities—and had been unwell with confirmed COVID-19 for 5 days or fewer in the community. Participants were randomly assigned (1:1) to receive 800 mg molnupiravir twice daily for 5 days plus usual care or usual care only. A secure, web-based system (Spinnaker) was used for randomisation, which was stratified by age (&lt;50 years vs ≥50 years) and vaccination status (yes vs no). COVID-19 outcomes were tracked via a self-completed online daily diary for 28 days after randomisation. The primary outcome was all-cause hospitalisation or death within 28 days of randomisation, which was analysed using Bayesian models in all eligible participants who were randomly assigned. This trial is registered with ISRCTN, number 30448031. Findings: Between Dec 8, 2021, and April 27, 2022, 26 411 participants were randomly assigned, 12 821 to molnupiravir plus usual care, 12 962 to usual care alone, and 628 to other treatment groups (which will be reported separately). 12 529 participants from the molnupiravir plus usual care group, and 12 525 from the usual care group were included in the primary analysis population. The mean age of the population was 56·6 years (SD 12·6), and 24 290 (94%) of 25 708 participants had had at least three doses of a SARS-CoV-2 vaccine. Hospitalisations or deaths were recorded in 105 (1%) of 12 529 participants in the molnupiravir plus usual care group versus 98 (1%) of 12 525 in the usual care group (adjusted odds ratio 1·06 [95% Bayesian credible interval 0·81–1·41]; probability of superiority 0·33). There was no evidence of treatment interaction between subgroups. Serious adverse events were recorded for 50 (0·4%) of 12 774 participants in the molnupiravir plus usual care group and for 45 (0·3%) of 12 934 in the usual care group. None of these events were judged to be related to molnupiravir. Interpretation: Molnupiravir did not reduce the frequency of COVID-19-associated hospitalisations or death among high-risk vaccinated adults in the community

Molnupiravir plus usual care versus usual care alone as early treatment for adults with COVID-19 at increased risk of adverse outcomes (PANORAMIC): an open-label, platform-adaptive randomised controlled trial

BackgroundThe safety, effectiveness, and cost-effectiveness of molnupiravir, an oral antiviral medication for SARS-CoV-2, has not been established in vaccinated patients in the community at increased risk of morbidity and mortality from COVID-19. We aimed to establish whether the addition of molnupiravir to usual care reduced hospital admissions and deaths associated with COVID-19 in this population.MethodsPANORAMIC was a UK-based, national, multicentre, open-label, multigroup, prospective, platform adaptive randomised controlled trial. Eligible participants were aged 50 years or older—or aged 18 years or older with relevant comorbidities—and had been unwell with confirmed COVID-19 for 5 days or fewer in the community. Participants were randomly assigned (1:1) to receive 800 mg molnupiravir twice daily for 5 days plus usual care or usual care only. A secure, web-based system (Spinnaker) was used for randomisation, which was stratified by age (<50 years vs ≥50 years) and vaccination status (yes vs no). COVID-19 outcomes were tracked via a self-completed online daily diary for 28 days after randomisation. The primary outcome was all-cause hospitalisation or death within 28 days of randomisation, which was analysed using Bayesian models in all eligible participants who were randomly assigned. This trial is registered with ISRCTN, number 30448031.FindingsBetween Dec 8, 2021, and April 27, 2022, 26 411 participants were randomly assigned, 12 821 to molnupiravir plus usual care, 12 962 to usual care alone, and 628 to other treatment groups (which will be reported separately). 12 529 participants from the molnupiravir plus usual care group, and 12 525 from the usual care group were included in the primary analysis population. The mean age of the population was 56·6 years (SD 12·6), and 24 290 (94%) of 25 708 participants had had at least three doses of a SARS-CoV-2 vaccine. Hospitalisations or deaths were recorded in 105 (1%) of 12 529 participants in the molnupiravir plus usual care group versus 98 (1%) of 12 525 in the usual care group (adjusted odds ratio 1·06 [95% Bayesian credible interval 0·81–1·41]; probability of superiority 0·33). There was no evidence of treatment interaction between subgroups. Serious adverse events were recorded for 50 (0·4%) of 12 774 participants in the molnupiravir plus usual care group and for 45 (0·3%) of 12 934 in the usual care group. None of these events were judged to be related to molnupiravir.InterpretationMolnupiravir did not reduce the frequency of COVID-19-associated hospitalisations or death among high-risk vaccinated adults in the community

Assessing Advantages and Drawbacks of Rapidly Generated Ultra-Large 3D Breast Cancer Spheroids: Studies with Chemotherapeutics and Nanoparticles

Traditionally, two-dimensional (2D) monolayer cell culture models have been used to study in vitro conditions for their ease of use, simplicity and low cost. However, recently, three-dimensional (3D) cell culture models have been heavily investigated as they provide better physiological relevance for studying various disease behaviors, cellular activity and pharmaceutical interactions. Typically, small-sized tumor spheroid models (100&ndash;500 &mu;m) are used to study various biological and physicochemical activities. Larger, millimetric spheroid models are becoming more desirable for simulating native tumor microenvironments (TMEs). Here, we assess the use of ultra-large spheroid models (~2000 &mu;m) generated from scaffolds made from a nozzle-free, ultra-high resolution printer; these models are explored for assessing chemotherapeutic responses with molecular doxorubicin (DOX) and two analogues of DoxilⓇ (Dox-NPⓇ, DoxovesTM) on MDA-MB-231 and MCF-7 breast cancer cell lines. To provide a comparative baseline, small spheroid models (~500 &mu;m) were developed using a self-aggregation method of MCF-7 breast cancer cell lines, and underwent similar drug treatments. Analysis of both large and small MCF-7 spheroids revealed that Dox-NP tends to have the highest level of inhibition, followed by molecular doxorubicin and then Doxoves. The experimental advantages and drawbacks of using these types of ultra-large spheroids for cancer research are discussed