The automation of the \"Welding Machine\" for the DUs integration in the KM3NeT experiment

This note describes some technical aspects, in particular the control system, of one of the tools used during Process-1 of the integration of the Detection Units (DUs) in the KM3NeT experiment. In particular, the device is designed to seal the Break-out-box (BOB). The BOB is a box interface between a Digital Optical Module (DOM) and the electro-optical cable (VEOC) for power and optical connection of each optical module (DOM) to the DU. The original manual version of the tool developed by NIKHEF was then automatized by INFN-LNS in order to guarantee a replicable operation in the recursive process of the DU integration and two samples have been developed for the integration sites at LNS and Genova respectively. The general principle and performances of the automated welding machine will be presented shortly in a dedicated INFN report. Here we summarize the cycle of the operations performed by the machine and how they are managed by corresponding control program and related electronics boards

Investigation of the weather conditions during the collapse of the Morandi Bridge in Genoa on 14 August 2018

On 14 August 2018, Morandi Bridge in Genoa, Italy, collapsed sending vehicles and tons of rubble to the ground about 40\u2009m below and killing 43 people. Preliminary investigations indicated poor design, questionable building practices and insufficient maintenance or a combination of these factors as a possible cause of collapse. However, at the time of collapse, a thunderstorm associated with strong winds, lightning and rain was developed over the city. While it is still not clear whether or not it played a role in this disaster, the present paper documents the weather conditions during the collapse and analyzes in detail a downburst that occurred at the time of the collapse a few kilometers from the bridge. The thunderstorm is analyzed using direct and remote measurements in an attempt to describe the evolution of the cumulonimbus cloud as it approached the coast from the sea. The detected downburst is investigated using a lidar scanner and the anemometric network in the Port of Genoa. The paper shows that the unique lidar measurements enabled a partial reconstruction of the gust front shape and displacement velocity. The Weather Research and Forecasting (WRF) simulations, carried out with three different forcing conditions, forecasted the cumuliform convection at larger scales but did not accurately replicate the downburst signature at the surface that was measured by radar, lidar, and anemometers. This result demonstrates that the localized wind conditions during the collapse time could not be operationally forecasted

Investigation of the Weather Conditions During the Collapse of the Morandi Bridge in Genoa on 14 August 2018 Using Field Observations and WRF Model

On 14 August 2018, Morandi Bridge in Genoa, Italy, collapsed to the ground that was 40 m below. This tragedy killed 43 people. Preliminary investigations indicated poor design, questionable building practices, and insufficient maintenance\u2014or a combination of these factors\u2014as a possible cause of the collapse. However, around the collapse time, a thunderstorm associated with strong winds, lightning, and rain also developed over the city. While it is unclear if this thunderstorm played a role in the collapse, the present study examines the weather conditions before and during the bridge collapse. The study particularly focuses on the analysis of a downburst that was observed around the collapse time and a few kilometers away from the bridge. Direct and remote sensing measurements are used to describe the evolution of the thunderstorm during its approached from the sea to the city. The Doppler lidar measurements allowed the reconstruction of the gust front shape and the evaluation of its displacement velocity of 6.6 m s 121 towards the lidar. The Weather Research and Forecasting simulations highlighted that it is still challenging to forecast localized thunderstorms with operational setups. The study has shown that assimilation of radar reflectivity improves the timing and reconstruction of the gust front observed by local measurements

Cell Line Data Base: structure and recent improvements towards molecular authentication of human cell lines

The Cell Line Data Base (CLDB) is a well-known reference information source on human and animal cell lines including information on more than 6000 cell lines. Main biological features are coded according to controlled vocabularies derived from international lists and taxonomies. HyperCLDB (http://bioinformatics.istge.it/hypercldb/) is a hypertext version of CLDB that improves data accessibility by also allowing information retrieval through web spiders. Access to HyperCLDB is provided through indexes of biological characteristics and navigation in the hypertext is granted by many internal links. HyperCLDB also includes links to external resources. Recently, an interest was raised for a reference nomenclature for cell lines and CLDB was seen as an authoritative system. Furthermore, to overcome the cell line misidentification problem, molecular authentication methods, such as fingerprinting, single-locus short tandem repeat (STR) profile and single nucleotide polymorphisms validation, were proposed. Since this data is distributed, a reference portal on authentication of human cell lines is needed. We present here the architecture and contents of CLDB, its recent enhancements and perspectives. We also present a new related database, the Cell Line Integrated Molecular Authentication (CLIMA) database (http://bioinformatics.istge.it/clima/), that allows to link authentication data to actual cell lines

The integration of the detection units of KM3NET in Genova

The KM3NeT experiment (1) for the detection of high energy cosmic neutrinos is being built in two sites of the Mediterranean Sea: Capo Passero in Sicily and Toulon in the French coast. The full detection system includes 3 building blocks of Detection Units (DU) (2), each block of 115 DUs. The DU accommodates up to 18 digital optical modules (DOMs) (3). In this note we describe the facility to integrate the DOMs to the vertical cable of the line (VEOC) as realized in our ground floor laboratory of the INFN Institute in Genova

The new "Welding Machine" for the DUs integration in the KM3NeT experiment: Mechanical and Pneumatic parts

This note describes one of the tools used during Process-1 of the integration of the Detection Units (DUs) in the KM3NeT experiment. In particular, the device is designed to seal the Break-out-box (BOB). The BOB is a box interface between a Digital Optical Module (DOM) and the electro-optical cable (VEOC) for power and optical connection of each optical module (DOM) to the DU. The original manual version of the tool developed by NIKHEF was then automatized by INFN-LNS in order to guarantee a reproducible operation in the recursive process of the DU integration and two samples have been realized for the integration sites at LNS and Genova respectively