41,189 research outputs found
GIOTTO's antenna de-spin mechanism: Ots lubrication and thermal vacuum performance
Except in the near Earth phase of GIOTTO's mission to Comet Halley, the HGA (high gain antenna) on board GIOTTO was the only designed means of up/down communications. The spacecraft spin stabilization required that the HGA be despun at the same rotational rate of nominally 15 rpm in order to keep the HGA pointing accurately to a Earth. A dual servomotor despin mechanism was designed and built by SEP of France for this purpose. The expected thermal environment suggested that dry lubrication was preferable to wet for the ball bearings but there existed no relevant data on the torque noise spectrum of candidate solid lubricants. Therefore ad hoc torque noise tests were run with two solid lubricants: ion plated lead film plus lead bronze cage (retainer) and a PTFE composite cage only. The lead lubrication showed the better spectrum up to the mission lifetime point so it was selected for continued test over some 20 times the Halley mission life, with periodic torque spectrum monitoring. The spectrum remained well within the pointing error budget over the 100 million revolutions covered
Advanced flight design systems subsystem performance models. User guide: Environmental analysis routine library
A user guide for a library of interactive computer routines used to develop performance analysis models of specific environmental control and life support subsystems is presented
Advanced flight design systems subsystem performance models. Sample model: Environmental analysis routine library
A sample environmental control and life support model performance analysis using the environmental analysis routines library is presented. An example of a complete model set up and execution is provided. The particular model was synthesized to utilize all of the component performance routines and most of the program options
Phosphorus-containing imide resins
Bis- and tris-imides derived from tris (m-aminophenyl) phosphine oxides by reaction with maleic anhydride or its derivatives, and addition polymers of such imides, including a variant in which a mono-imide is condensed with a dianhydride and the product is treated with a further quantity of maleic anhydride. Such monomers or their oligomes may be used to impregnate fibers and fabrics which when cured, are flame resistant. Also an improved method of producing tris (m-aminophenyl) phosphine oxides from the nitro analogues by reduction with hydrazine hydrate using palladized charcoal or Raney nickel as the catalyst is described
Elastomer-modified phosphorus-containing imide resins
Phosphine oxide-containing polyimide resins modified by elastomers, are disclosed which have improved mechanical properties. These products are particularly useful in the production of fiber or fabric-reinforced composites or laminates
Phosphorus-containing bisimide resins
The production of fire-resistant resins particularly useful for making laminates with inorganic fibers such as graphite fibers is discussed. The resins are by (1) condensation of an ethylenically unsaturated cyclic anhydride with a bis(diaminophenyl) phosphine oxide, and (2) by addition polymerization of the bisimide so obtained. Up to about 50%, on a molar basis, of benzophenonetetracarboxylic acid anhydride can be substituted for some of the cyclic anhydride to alter the properties of the products. Graphite cloth laminates made with these resins show 800 C char yields greater than 70% by weight in nitrogen. Limiting oxygen indexes of more than 100% are determined for these resins
Phosphorus-containing imide resins
Cured polymers of bis and tris-imides derived from tris(m-aminophenyl) phosphine oxides by reaction with maleic anhydride or its derivatives, and addition polymers of such imides, including a variant in which a monoimide is condensed with a dianhydride and the product is treated with a further quantity of maleic anhydride prior to curing are disclosed and claimed. Such polymers are flame resistant. Also disclosed are an improved method of producing tris(m-aminophenyl) phosphine oxides from the nitro analogues by reduction with hydrazine hydrate using palladized charcoal or Raney nickel as the catalyst and fiber reinforced cured resin composites
Quality of life and building design in residential and nursing homes for older people
Older people living in residential and nursing care homes spend a large proportion of their time within the boundaries of the home, and may depend on the environment to compensate for their physical or cognitive frailties. Regulations and guidelines on the design of care buildings have accumulated over time with little knowledge of their impact on the quality of life of building users. The Design in Caring Environments Study (DICE) collected cross-sectional data on building design and quality of life in 38 care homes in and near Sheffield, Yorkshire. Quality of life was assessed using methods which included all residents regardless of their frailty, and staff morale was also assessed. The physical environment was measured on 11 user-related domains using a new tool, the Sheffield Care Environment Assessment Matrix (SCEAM). Significant positive associations were found between several aspects of the built environment and the residents' quality of life. There was evidence that a focus on safety and health requirements could be creating risk-averse environments which act against quality of life, particularly for the least frail residents. Staff morale was associated with attributes of a non-institutional environment for residents rather than with the facilities provided for the staff. The new tool for assessing building design has potential applications in further research and for care providers
Thermoelectric properties of -FeSi
We investigate the thermoelectric properties of -FeSi
using first principles electronic structure and Boltzmann transport
calculations. We report a high thermopower for both \textit{p}- and
\textit{n}-type -FeSi over a wide range of carrier
concentration and in addition find the performance for \textit{n}-type to be
higher than for the \textit{p}-type. Our results indicate that, depending upon
temperature, a doping level of 3 - 2
cm may optimize the thermoelectric performance
- …