Printing of wirelessly rechargeable solid-state supercapacitors for soft, smart contact lenses with continuous operations

Recent advances in smart contact lenses are essential to the realization of medical applications and vision imaging for augmented reality through wireless communication systems. However, previous research on smart contact lenses has been driven by a wired system or wireless power transfer with temporal and spatial restrictions, which can limit their continuous use and require energy storage devices. Also, the rigidity, heat, and large sizes of conventional batteries are not suitable for the soft, smart contact lens. Here, we describe a human pilot trial of a soft, smart contact lens with a wirelessly rechargeable, solid-state supercapacitor for continuous operation. After printing the supercapacitor, all device components (antenna, rectifier, and light-emitting diode) are fully integrated with stretchable structures for this soft lens without obstructing vision. The good reliability against thermal and electromagnetic radiations and the results of the in vivo tests provide the substantial promise of future smart contact lenses

High-resolution, reconfigurable printing of liquid metals with three-dimensional structures

We report an unconventional approach for high-resolution, reconfigurable 3D printing using liquid metals for stretchable, 3D integrations. A minimum line width of 1.9 ??m can be reliably formed using direct printing, and printed patterns can be reconfigured into diverse 3D structures with maintaining pristine resolutions. This reconfiguration can be performed multiple times, and it also generates a thin oxide interface that can be effective in preventing the spontaneous penetration of gallium atoms into different metal layers while preserving electrical properties under ambient conditions. Moreover, these free-standing features can be encapsulated with stretchable, conformal passivations. We demonstrate applications in the form of a reconfigurable antenna, which is tunable by changing geometeries, and reversibly movable interconnections used as mechanical switches. The free-standing 3D structure of electrodes is also advantageous for minimizing the number and space between interconnections, which is important for achieving higher integrations, as demonstrated in an array of microLEDs

High-Resolution 3D Printing of Freeform, Transparent Displays in Ambient Air

Direct 3D printing technologies to produce 3D optoelectronic architectures have been explored extensively over the last several years. Although commercially available 3D printing techniques are useful for many applications, their limits in printable materials, printing resolutions, or processing temperatures are significant challenges for structural optoelectronics in achieving fully 3D-printed devices on 3D mechanical frames. Herein, the production of active optoelectronic devices with various form factors using a hybrid 3D printing process in ambient air is reported. This hybrid 3D printing system, which combines digital light processing for printing 3D mechanical architectures and a successive electrohydrodynamic jet for directly printing transparent pixels of organic light-emitting diodes at room temperature, can create high-resolution, transparent displays embedded inside arbitrarily shaped, 3D architectures in air. Also, the demonstration of a 3D-printed, eyeglass-type display for a wireless, augmented reality system is an example of another application. These results represent substantial progress in the development of next-generation, freeform optoelectronics

Photo-patternable and transparent films using cellulose nanofibers for stretchable origami electronics

Substantial progress in flexible or stretchable electronics over the past decade has extensively impacted various technologies such as wearable devices, displays and automotive electronics for smart cars. An important challenge is the reliability of these deformable devices under thermal stress. Different coefficients of thermal expansion (CTE) between plastic substrates and the device components, which include multiple inorganic layers of metals or ceramics, induce thermal stress in the devices during fabrication processes or long-term operations with repetitions of thermal cyclic loading-unloading, leading to device failure and reliability degradation. Here, we report an unconventional approach to form photo-patternable, transparent cellulose nanofiber (CNF) hybrid films as flexible and stretchable substrates to improve device reliability using simultaneous electrospinning and spraying. The electrospun polymeric backbones and sprayed CNF fillers enable the resulting hybrid structure to be photolithographically patternable as a negative photoresist and thermally and mechanically stable, presenting outstanding optical transparency and low CTE. We also formed stretchable origami substrates using the CNF hybrid that are composed of rigid support fixtures and elastomeric joints, exploiting the photo-patternability. A demonstration of transparent organic light-emitting diodes and touchscreen panels on the hybrid film suggests its potential for use in next-generation electronics.ope

Smart sensor systems for wearable electronic devices

Wearable human interaction devices are technologies with various applications for improving human comfort, convenience and security and for monitoring health conditions. Healthcare monitoring includes caring for the welfare of every person, which includes early diagnosis of diseases, real-time monitoring of the effects of treatment, therapy, and the general monitoring of the conditions of people's health. As a result, wearable electronic devices are receiving greater attention because of their facile interaction with the human body, such as monitoring heart rate, wrist pulse, motion, blood pressure, intraocular pressure, and other health-related conditions. In this paper, various smart sensors and wireless systems are reviewed, the current state of research related to such systems is reported, and their detection mechanisms are compared. Our focus was limited to wearable and attachable sensors. Section 1 presents the various smart sensors. In Section 2, we describe multiplexed sensors that can monitor several physiological signals simultaneously. Section 3 provides a discussion about short-range wireless systems including bluetooth, near field communication (NFC), and resonance antenna systems for wearable electronic devices

Smart contact lens and transparent heat patch for remote monitoring and therapy of chronic ocular surface inflammation using mobiles

Wearable electronic devices that can monitor physiological signals of the human body to provide biomedical information have been drawing extensive interests for sustainable personal health management. Here, we report a human pilot trial of a soft, smart contact lens and a skin-attachable therapeutic device for wireless monitoring and therapy of chronic ocular surface inflammation (OSI). As a diagnostic device, this smart contact lens enables real-time measurement of the concentration of matrix metalloproteinase-9, a biomarker for OSI, in tears using a graphene field-effect transistor. As a therapeutic device, we also fabricated a stretchable and transparent heat patch attachable on the human eyelid conformably. Both diagnostic and therapeutic devices can be incorporated using a smartphone for their wireless communications, thereby achieving instantaneous diagnosis of OSI and automated hyperthermia treatments. Furthermore, in vivo tests using live animals and human subjects confirm their good biocompatibility and reliability as a noninvasive, mobile health care solution

Characteristics of blood tests in patients with acute cerebral infarction who developed symptomatic intracranial hemorrhage after intravenous administration of recombinant tissue plasminogen activator

Objective Patients suspected as having acute ischemic stroke usually undergo blood tests, including coagulation-related indexes, because thrombocytopenia and coagulopathy are contraindications for recombinant tissue plasminogen activator (rtPA) administration. We aimed to identify blood test indexes associated with symptomatic intracranial hemorrhage (sICH) in patients with acute ischemic stroke who received intravenous rtPA. Methods This retrospective observational study included patients diagnosed with acute ischemic stroke who were treated with intravenous rtPA at the emergency department of a tertiary hospital in Seoul between February 2008 and January 2018. Blood test indexes were compared between the sICH and non-sICH groups. Logistic regression and receiver-operating characteristic curve analyses were performed. Results In this study, 375 patients were finally included. Of 375 patients, 42 (11.2%) showed new intracranial hemorrhage on follow-up brain computed tomography, of whom 14 (3.73%) had sICH. Platelet count, aspartate aminotransferase and lactate dehydrogenase levels were significantly different between the sICH and non-sICH groups, and platelet count showed statistical significance in the regression analysis. Significantly lower platelet counts were observed in the sICH group than in the non-sICH group (174,500 vs. 228,000/mm3, P=0.020). The best cutoff platelet count was 195,000/mm3, and patients with platelet counts of <195,000/mm3 had a 5.4- times higher risk of developing sICH than those with platelet counts of ≥195,000/mm3. Conclusion Platelet count was the only independent parameter associated with sICH among the blood test indexes. Mild thrombocytopenia may increase the risk of sICH after intravenous administration of rtPA

The genome sequence of Xanthomonas oryzae pathovar oryzae KACC10331, the bacterial blight pathogen of rice

The nucleotide sequence was determined for the genome of Xanthomonas oryzae pathovar oryzae (Xoo) KACC10331, a bacterium that causes bacterial blight in rice (Oryza sativa L.). The genome is comprised of a single, 4 941 439 bp, circular chromosome that is G + C rich (63.7%). The genome includes 4637 open reading frames (ORFs) of which 3340 (72.0%) could be assigned putative function. Orthologs for 80% of the predicted Xoo genes were found in the previously reported X.axonopodis pv. citri (Xac) and X.campestris pv. campestris (Xcc) genomes, but 245 genes apparently specific to Xoo were identified. Xoo genes likely to be associated with pathogenesis include eight with similarity to Xanthomonas avirulence (avr) genes, a set of hypersensitive reaction and pathogenicity (hrp) genes, genes for exopolysaccharide production, and genes encoding extracellular plant cell wall-degrading enzymes. The presence of these genes provides insights into the interactions of this pathogen with its gramineous host