Light Weight Complete Denture Prosthesis - A Case Report

Retention, stability and support are the basic principles on which the success of a complete denture relies on. Extreme resorption of the maxillary denture-bearing area leads to a narrower, constricted residual ridge with decreased supporting tissues and a larger restorative space between the maxillary and mandibular residual ridge. Rehabilitation in such cases may result in increased weight and height of the prosthesis further compromising its retention, support and stability. So, to prevent further resorption of ridges, the weight of the prosthesis needs to be reduced which can be achieved by making hollow prosthesis. This case report describes a novel technique of fabricating maxillary hollow maxillary complete denture

Prevalence of cardiovascular health risk behaviors in a remote rural community of Sindhuli district, Nepal

BACKGROUND: Cardiovascular disease (CVD) is emerging as a public health menace among low and middle income countries. It has particularly affected the poorest. However, there is paucity of information about CVD risk factors profile among Nepalese rural communities where the majority of people live in poverty. Therefore, this study aimed to identify the prevalence of cardiovascular health risk behaviors in an outback community of Nepal. METHODS: We conducted a descriptive cross-sectional study in Tinkanya Village Development Committee (VDC), Sindhuli between January and March, 2014. Total 406 participants of age 20 to 50 years were selected randomly. Data were collected using WHO-NCD STEPwise approach questionnaires and analyzed with SPSS V.16.0 and R i386 2.15.3 software. RESULT: The mean age of participants was 36.2 ± 9 years. Majority of participants (76.3%) were from lower socio-economic class, Adibasi/Janajati (63.1%), and without formal schooling (46.3%). Smoking was present in 28.6%, alcohol consumption in 47.8%, insufficient fruits and vegetables intake in 96.6%, insufficient physical activity in 48.8%; 25.6% had high waist circumference, 37.4% had overweight and obesity. Average daily salt intake per capita was 14.4 grams ±4.89 grams. Hypertension was detected in 12.3%. It had an inverse relationship with education and socio-economic status. In binary logistic regression analysis, age, smoking, body mass index (BMI) and daily salt intake were identified as significant predictors of hypertension. CONCLUSION: Present study showed high prevalence of smoking, alcohol consumption, insufficient fruit and vegetable intake, daily salt intake, overweight and obesity and hypertension among remote rural population suggesting higher risk for developing CVD in future. Nepalese rural communities, therefore, are in need of population-wide comprehensive intervention approaches for reducing CVD health risk behaviors

Measurement and interpretation of same-sign W boson pair production in association with two jets in pp collisions at s = 13 TeV with the ATLAS detector

This paper presents the measurement of fducial and diferential cross sections for both the inclusive and electroweak production of a same-sign W-boson pair in association with two jets (W±W±jj) using 139 fb−1 of proton-proton collision data recorded at a centre-of-mass energy of √s = 13 TeV by the ATLAS detector at the Large Hadron Collider. The analysis is performed by selecting two same-charge leptons, electron or muon, and at least two jets with large invariant mass and a large rapidity diference. The measured fducial cross sections for electroweak and inclusive W±W±jj production are 2.92 ± 0.22 (stat.) ± 0.19 (syst.)fb and 3.38±0.22 (stat.)±0.19 (syst.)fb, respectively, in agreement with Standard Model predictions. The measurements are used to constrain anomalous quartic gauge couplings by extracting 95% confdence level intervals on dimension-8 operators. A search for doubly charged Higgs bosons H±± that are produced in vector-boson fusion processes and decay into a same-sign W boson pair is performed. The largest deviation from the Standard Model occurs for an H±± mass near 450 GeV, with a global signifcance of 2.5 standard deviations

Combination of searches for heavy spin-1 resonances using 139 fb−1 of proton-proton collision data at s = 13 TeV with the ATLAS detector

A combination of searches for new heavy spin-1 resonances decaying into different pairings of W, Z, or Higgs bosons, as well as directly into leptons or quarks, is presented. The data sample used corresponds to 139 fb−1 of proton-proton collisions at = 13 TeV collected during 2015–2018 with the ATLAS detector at the CERN Large Hadron Collider. Analyses selecting quark pairs (qq, bb, , and tb) or third-generation leptons (τν and ττ) are included in this kind of combination for the first time. A simplified model predicting a spin-1 heavy vector-boson triplet is used. Cross-section limits are set at the 95% confidence level and are compared with predictions for the benchmark model. These limits are also expressed in terms of constraints on couplings of the heavy vector-boson triplet to quarks, leptons, and the Higgs boson. The complementarity of the various analyses increases the sensitivity to new physics, and the resulting constraints are stronger than those from any individual analysis considered. The data exclude a heavy vector-boson triplet with mass below 5.8 TeV in a weakly coupled scenario, below 4.4 TeV in a strongly coupled scenario, and up to 1.5 TeV in the case of production via vector-boson fusion

Meeting Future Energy Needs in the Hindu Kush Himalaya

As mentioned in earlier chapters, the HKH regions form the entirety of some countries, a major part of other countries, and a small percentage of yet others. Because of this, when we speak about meeting the energy needs of the HKH region we need to be clear that we are not necessarily talking about the countries that host the HKH, but the clearly delineated mountainous regions that form the HKH within these countries. It then immediately becomes clear that energy provisioning has to be done in a mountain context characterized by low densities of population, low incomes, dispersed populations, grossly underdeveloped markets, low capabilities, and poor economies of scale. In other words, the energy policies and strategies for the HKH region have to be specific to these mountain contexts

Search for dark photons in rare Z boson decays with the ATLAS detector

A search for events with a dark photon produced in association with a dark Higgs boson via rare decays of the standard model Z boson is presented, using 139     fb − 1 of √ s = 13     TeV proton-proton collision data recorded by the ATLAS detector at the Large Hadron Collider. The dark boson decays into a pair of dark photons, and at least two of the three dark photons must each decay into a pair of electrons or muons, resulting in at least two same-flavor opposite-charge lepton pairs in the final state. The data are found to be consistent with the background prediction, and upper limits are set on the dark photon’s coupling to the dark Higgs boson times the kinetic mixing between the standard model photon and the dark photon, α D ϵ 2 , in the dark photon mass range of [5, 40] GeV except for the Υ mass window [8.8, 11.1] GeV. This search explores new parameter space not previously excluded by other experiments

Combined measurement of the Higgs boson mass from the H → γγ and H → ZZ∗ → 4ℓ decay channels with the ATLAS detector using √s = 7, 8, and 13 TeV pp collision data

A measurement of the mass of the Higgs boson combining the H → Z Z ∗ → 4 ℓ and H → γ γ decay channels is presented. The result is based on 140     fb − 1 of proton-proton collision data collected by the ATLAS detector during LHC run 2 at a center-of-mass energy of 13 TeV combined with the run 1 ATLAS mass measurement, performed at center-of-mass energies of 7 and 8 TeV, yielding a Higgs boson mass of 125.11 ± 0.09 ( stat ) ± 0.06 ( syst ) = 125.11 ± 0.11     GeV . This corresponds to a 0.09% precision achieved on this fundamental parameter of the Standard Model of particle physics

A comparative study to find out the relationship between the inner inter-canthal distance, interpupillary distance, inter-commissural width, inter-alar width, and the width of maxillary anterior teeth in Aryans and Mongoloids

Meena Kumari Mishra, Raj Kumar Singh, Pramita Suwal, Prakash Kumar Parajuli, Pragya Shrestha, Dharanidhar Baral Department of Prosthodontics, BP Koirala Institute of Health Sciences, Dharan, Nepal Background: One of the most confusing and difficult aspects of complete denture prosthodontics is the selection of appropriately sized maxillary anterior denture teeth. Various guidelines have been suggested for determining the size of anterior teeth, but different opinions have been reported regarding their significance. In the study reported here, the relationships between facial measurements and the width of maxillary anterior teeth in two ethnic groups, namely Aryans and Mongoloids, were determined. Objective: The aims of the study were to determine the inner inter-canthal distance (ICAD), inter-pupillary distance (IPD), inter-commissural width (ICOW), inter-alar width (IAW), and the combined width of maxillary anterior teeth (CW) in Aryans and Mongoloids and to determine the relationships between these measurements. Materials and methods: Impressions of the teeth of 170 dentulous subjects (85 males and 85 females) were made with alginate then Type IV gypsum product was poured in. Measurements of the cast maxillary anterior teeth at their widest dimension (contact areas) were made with the Boley gauge. ICAD, IPD, ICOW, and IAW distances were also measured with a Boley gauge. Results: For all 170 subjects, 85 Aryans and 85 Mongoloids, Pearson's correlation coefficient (r) for IAW, IPD, ICOW, ICAD, and CW was calculated. In Aryans, highly significant (P<0.001) but weak correlations were found between CW and IAW, IPD, and ICOW. In Mongoloids, a highly significant (P<0.001) and weak correlation was found only between CW and IPD. Conclusion: Within the limitations of this study, the results suggest that the IAW, IPD, and ICOW for Aryans and IPD for Mongoloids can be used as a preliminary method for determining the width of the maxillary anterior teeth in edentulous patients. Keywords: maxillary anterior denture teeth, facial measurements, maxillary anterior teeth width, Nepal&nbsp

An anthropometric study to evaluate the correlation between the occlusal vertical dimension and length of the thumb

Bishal Babu Basnet, Prakash Kumar Parajuli, Raj Kumar Singh, Pramita Suwal, Pragya Shrestha, Dharanidhar BaralDepartment of Prosthodontics, BP Koirala Institute of Health Sciences, Dharan, NepalBackground: Establishment of proper occlusal vertical dimension (OVD) is one of the important tasks for successful prosthodontic therapy. An ideal method for determining OVD in terms of cost, time, and instrument requirements has been sought in prosthodontics by various investigators. However, no such single method has been formulated. In the current anthropometric study, the relationship of the length of the thumb to the OVD was tested in two ethnic groups of Nepal, Aryans, and Mongoloids. The result of this study can be useful in determining proper OVD in edentulous patients.Aims and objectives: The primary aim of the present study was to evaluate the correlation between the length of the thumb and OVD in Aryan and Mongoloid ethnic groups. The secondary aim was to compare the correlation between OVD and other anatomic measurements (eye–ear distance and pupil-to-rima oris distance) in these ethnicities.Materials and methods: The OVD, thumb length, eye–ear distance and distance between pupil of eye and rima oris were measured in a total of 500 adult dentulous volunteers. The correlation between OVD and thumb length as well as other anatomic measurements was checked with Pearson's product moment correlation coefficient. Linear regression analysis was performed to determine the relationship of OVD to the length of the thumb.Results: The thumb length was significantly (P≤0.05) correlated with strong and positive values (Pearson’s coefficient =0.874 in the whole population, 0.826 in Aryans, and 0.944 in Mongoloids). Regression analysis showed that thumb length was significantly related to OVD in both ethnic groups.Conclusion: Within the limitations of the present study, the result implies that thumb length can be used as an adjunct for establishing OVD in the edentulous patients.Keywords: thumb, prosthodontic, caliper, rima oris, pupil of eye, edentulous patien