Validation of ash/dust detections from SEVIRI data using ACTRIS/EARLINET ground-based LIDAR measurements

Twotailored configurations of the Robust Satellite Technique (RST) multi-temporal approach, for airborne volcanic ash and desert dust detection, have been tested in the framework of the European Natural Airborne Disaster Information and Coordination System for Aviation (EUNADICS-AV) project. The two algorithms, running on Spinning Enhanced Visible Infra-Red Imager (SEVIRI) data, were previously assessed over wide areas by comparison with independent satellite-based aerosol products. In this study, we present results of a first validation analysis of the above mentioned satellite-based ash/dust products using independent, ground-based observations coming from the European Aerosol Research Lidar Network (EARLINET). The aim is to assess the capabilities of RST-based ash/dust products in providing useful information even at local scale and to verify their applicability as a "trigger" to timely activate EARLINET measurements during airborne hazards. The intense Saharan dust event of May 18-23 2008-which affected both the Mediterranean Basin and Continental Europe-and the strong explosive eruptions of Eyjafjallajökull (Iceland) volcano of April-May 2010, were analyzed as test cases. Our results show that both RST-based algorithms were capable of providing reliable information about the investigated phenomena at specific sites of interest, successfully detecting airborne ash/dust in different geographic regions using both nighttime and daytime SEVIRI data. However, the validation analysis also demonstrates that ash/dust layers remain undetected by satellite in the presence of overlying meteorological clouds and when they are tenuous (i.e., with an integrated backscatter coefficient less than ~0.001 sr-1 and with aerosol backscatter coefficient less than ~1 × 10-6 m-1sr-1). This preliminary analysis confirms that the continuity of satellite-based observations can be used to timely "trigger" ground-based LIDAR measurements in case of airborne hazard events. Finally, this work confirms that advanced satellite-based detection schemes may provide a relevant contribution to the monitoring of ash/dust phenomena and that the synergistic use of (satellite-based) large scale, continuous and timely records with (ground-based) accurate and quantitative measurements may represent an added value, especially in operational scenarios

Video-assisted mediastinoscopy (VAM) for surgical resection of ectopic parathyroid adenoma

<p>Abstract</p> <p>Background</p> <p>Ectopic mediastinal parathyroid adenomas or hyperplasia account for up to 25% of primary hyperparathyroidism (HPT). Two percent of them are not accessible by standard cervical surgical approaches. Surgical resection has traditionally been performed via median sternotomy or thoracotomy and more recently, via video assisted thoracoscopic surgery (VATS). We present our experience with the novel use of Video-Assisted Mediastinoscopy (VAM) for resection of ectopic mediastinal parathyroid glands.</p> <p>Case presentation</p> <p>4 patients underwent VAM for removal of an ectopic intramediastinal parathyroid gland. All of them had at least one previous unsuccessful neck exploration.</p> <p>In all cases histology confirmed complete resection of ectopic parathyroid glands (3 parathyroid adenomas and one parathyroid hyperplasia). Two of the patients required a partial sternal split to facilitate exploration.</p> <p>Conclusion</p> <p>The cervical approach for resection of ectopic parathyroid adenomas is frequently unsuccessful. Previously, the standard surgical approach in such cases was sternotomy and exploration of the mediastinum. Recently, a number of less invasive modalities have been introduced.</p> <p>We found that VAM has several advantages. It has a short theatre time does not require a complex anaesthetic and is performed with the patient in classic supine position utilising often a previous cervical scar with good cosmetic results. It offers a short hospital stay; it is cost effective with minimal use of fancy and pricy consumables with a comfortable incision and no violation of the pleural space.</p> <p>Additionally the use of digital Video imaging has increased the sensitivity of the mediastinoscopy and has added safety and confidence in performing a detailed mediastinal exploration with an additional great training value as well.</p

Synthesis and solution properties of a temperature-responsive PNIPAM–b-PDMS–b-PNIPAM triblock copolymer

In this paper, we report the synthesis and self-assembly of a novel thermoresponsive PNIPAM60–b-PDMS70–b-PNIPAM60 triblock copolymer in aqueous solution. The copolymer used a commercially available precursor modified with an atom transfer radical polymerization (ATRP) initiator to produce an ABA triblock copolymer via ATRP. Small-angle neutron scattering (SANS) was used to shed light on the structures of nanoparticles formed in aqueous solutions of this copolymer at two temperatures, 25 and 40 °C. The poly(dimethylsiloxane) block is very hydrophobic and poly(N-isopropylacrylamide) (PNIPAM) is thermoresponsive. SANS data at 25 °C indicates that the solutions of PNIPAM–b-PDMS–b-PNIPAM copolymers form well-defined aggregates with presumably core–shell structures below cloud point temperature. The scattering curves originating from nanoparticles formed at 40 °C in 100% D2O or 100% H2O were successfully fitted with the Beaucage model describing aggregates with hierarchical structure

LIVAS: A 3-D multi-wavelength aerosol/cloud database based on CALIPSO and EARLINET

We present LIVAS (LIdar climatology of Vertical Aerosol Structure for space-based lidar simulation studies), a 3-D multi-wavelength global aerosol and cloud optical database, optimized to be used for future space-based lidar end-to-end simulations of realistic atmospheric scenarios as well as retrieval algorithm testing activities. The LIVAS database provides averaged profiles of aerosol optical properties for the potential spaceborne laser operating wavelengths of 355, 532, 1064, 1570 and 2050 nm and of cloud optical properties at the wavelength of 532 nm. The global database is based on CALIPSO observations at 532 and 1064 nm and on aerosol-type-dependent backscatter- and extinction-related Ångström exponents, derived from EARLINET (European Aerosol Research Lidar Network) ground-based measurements for the UV and scattering calculations for the IR wavelengths, using a combination of input data from AERONET, suitable aerosol models and recent literature. The required spectral conversions are calculated for each of the CALIPSO aerosol types and are applied to CALIPSO backscatter and extinction data corresponding to the aerosol type retrieved by the CALIPSO aerosol classification scheme. A cloud optical database based on CALIPSO measurements at 532 nm is also provided, neglecting wavelength conversion due to approximately neutral scattering behavior of clouds along the spectral range of LIVAS. Averages of particle linear depolarization ratio profiles at 532 nm are provided as well. Finally, vertical distributions for a set of selected scenes of specific atmospheric phenomena (e.g., dust outbreaks, volcanic eruptions, wild fires, polar stratospheric clouds) are analyzed and spectrally converted so as to be used as case studies for spaceborne lidar performance assessments. The final global data set includes 4-year (1 January 2008–31 December 2011) time-averaged CALIPSO (Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations) data on a uniform grid of 1° × 1° with the original high vertical resolution of CALIPSO in order to ensure realistic simulations of the atmospheric variability in lidar end-to-end simulations

Ground/space, passive/active remote sensing observations coupled with particle dispersion modelling to understand the inter-continental transport of wildfire smoke plumes

During the 2017 record-breaking burning season in Canada/United States, intense wild fires raged during the first week of September in the Pacific northwestern region (British Columbia, Alberta, Washington, Oregon, Idaho, Montana and northern California) burning mostly temperate coniferous forests. The heavy loads of smoke particles emitted in the atmosphere reached the Iberian Peninsula (IP) a few days later on 7 and 8 September. Satellite imagery allows to identify two main smoke clouds emitted during two different periods that were injected and transported in the atmosphere at several altitude levels. Columnar properties on 7 and 8 September at two Aerosol Robotic Network (AERONET) mid-altitude, background sites in northern and southern Spain are: aerosol optical depth (AOD) at 440 nm up to 0.62, Ångström exponent of 1.6–1.7, large dominance of small particles (fine mode fraction >0.88), low absorption AOD at 440 nm (0.98). Profiles from the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) show the presence of smoke particles in the stratosphere during the transport, whereas the smoke is only observed in the troposphere at its arrival over the IP. Portuguese and Spanish ground lidar stations from the European Aerosol Research Lidar Network/Aerosols, Clouds, and Trace gases Research InfraStructure Network (EARLINET/ACTRIS) and the Micro-Pulse Lidar NETwork (MPLNET) reveal smoke plumes with different properties: particle depolarization ratio and color ratio, respectively, of 0.05 and 2.5 in the mid troposphere (5–9 km) and of 0.10 and 3.0 in the upper troposphere (10–13 km). In the mid troposphere the particle depolarization ratio does not seem time-dependent during the transport whereas the color ratio seems to increase (larger particles sediment first). To analyze the horizontal and vertical transport of the smoke from its origin to the IP, particle dispersion modelling is performed with the Hybrid Single Particle Lagrangian Integrated Trajectory Model (HYSPLIT) parameterized with satellite-derived biomass burning emission estimates from the Global Fire Assimilation System (GFAS) of the Copernicus Atmosphere Monitoring Service (CAMS). Three compounds are simulated: carbon monoxide, black carbon and organic carbon. The results show that the first smoke plume which travels slowly reaches rapidly (~1 day) the upper troposphere and lower stratosphere (UTLS) but also shows evidence of large scale horizontal dispersion, while the second plume, entrained by strong subtropical jets, reaches the upper troposphere much slower (~2.5 days). Observations and dispersion modelling all together suggest that particle depolarization properties are enhanced during their vertical transport from the mid to the upper troposphere.Spanish groups acknowledge the Spanish Ministry of Economy and Competitivity (MINECO) (ref. CGL2013-45410-R, CGL2014-52877-R, CGL2014-55230-R, TEC2015-63832-P, CGL2015-73250-JIN, CGL2016-81092-R and CGL2017-85344-R)European Union through H2020 programme ACTRIS-2, grant 654109European Union through H2020 programme EUNADICS-AV, grant 723986European Union through H2020 programme GRASP-ACE, grant 77834

On the definition and examples of cones and finsler spacetimes

The authors warmly acknowledge Professor Daniel Azagra (Universidad Complutense, Madrid) his advise on approximation of convex functions as well as Profs. Kostelecky (Indiana University), Fuster (University of Technology, Eindhoven), Stavrinos (University of Athens), Pfeifer (University of Tartu), Perlick (University of Bremen) and Makhmali (Institute of Mathematics, Warsaw) their comments on a preliminary version of the article. The careful revision by the referee is also acknowledged. This work is a result of the activity developed within the framework of the Programme in Support of Excellence Groups of the Region de Murcia, Spain, by Fundacion Seneca, Science and Technology Agency of the Region de Murcia. MAJ was partially supported by MINECO/FEDER project reference MTM2015-65430-P and Fundacion Seneca project reference 19901/GERM/15, Spain and MS by Spanish MINECO/ERDF project reference MTM2016-78807-C2-1-P.A systematic study of (smooth, strong) cone structures C and Lorentz–Finsler metrics L is carried out. As a link between both notions, cone triples (Ω,T,F), where Ω (resp. T) is a 1-form (resp. vector field) with Ω(T)≡1 and F, a Finsler metric on ker(Ω), are introduced. Explicit descriptions of all the Finsler spacetimes are given, paying special attention to stationary and static ones, as well as to issues related to differentiability. In particular, cone structures C are bijectively associated with classes of anisotropically conformal metrics L, and the notion of cone geodesic is introduced consistently with both structures. As a non-relativistic application, the time-dependent Zermelo navigation problem is posed rigorously, and its general solution is provided.MINECO/FEDER project, Spain MTM2015-65430-PFundacion Seneca 19901/GERM/15Spanish MINECO/ERDF project MTM2016-78807-C2-1-

EARLINET observations of Saharan dust intrusions over the northern Mediterranean region (2014--2017): properties and impact on radiative forcing

Remote sensing measurements of aerosols using depolarization Raman lidar systems from four EARLINET (European Aerosol Research Lidar Network) stations are used for a comprehensive analysis of Saharan dust events over the Mediterranean basin in the period 2014–2017. In this period, 51 dust events regarding the geometrical, optical and microphysical properties of dust were selected, classified and assessed according to their radiative forcing effect on the atmosphere. From west to east, the stations of Granada, Potenza, Athens and Limassol were selected as representative Mediterranean cities regularly affected by Saharan dust intrusions. Emphasis was given on lidar measurements in the visible (532 nm) and specifically on the consistency of the particle linear depolarization ratio (δp532), the extinction-to-backscatter lidar ratio (LR532) and the aerosol optical thickness (AOT532) within the observed dust layers. We found mean δp532 values of 0.24±0.05, 0.26±0.06, 0.28±0.05 and 0.28±0.04, mean LR532 values of 52±8, 51±9, 52±9 and 49±6 sr and mean AOT532 values of 0.40±0.31, 0.11±0.07, 0.12±0.10 and 0.32±0.17, for Granada, Potenza, Athens and Limassol, respectively. The mean layer thickness values were found to range from ∼ 1700 to ∼ 3400 m a.s.l. Additionally, based also on a previous aerosol type classification scheme provided by airborne High Spectral Resolution Lidar (HSRL) observations and on air mass backward trajectory analysis, a clustering analysis was performed in order to identify the mixing state of the dusty layers over the studied area. Furthermore, a synergy of lidar measurements and modeling was used to analyze the solar and thermal radiative forcing of airborne dust in detail. In total, a cooling behavior in the solar range and a significantly lower heating behavior in the thermal range was estimated. Depending on the dust optical and geometrical properties, the load intensity and the solar zenith angle (SZA), the estimated solar radiative forcing values range from −59 to −22 W m−2 at the surface and from −24 to −1 W m−2 at the top of the atmosphere (TOA). Similarly, in the thermal spectral range these values range from +2 to +4 W m−2 for the surface and from +1 to +3 W m−2 for the TOA. Finally, the radiative forcing seems to be inversely proportional to the dust mixing ratio, since higher absolute values are estimated for less mixed dust layers

Tornado: Automatic Generation of Probing-Secure Masked Bitsliced Implementations

International audienceCryptographic implementations deployed in real world devices often aim at (provable) security against the powerful class of side-channel attacks while keeping reasonable performances. Last year at Asiacrypt, a new formal verification tool named tightPROVE was put forward to exactly determine whether a masked implementation is secure in the well-deployed probing security model for any given security order t. Also recently, a compiler named Usuba was proposed to automatically generate bitsliced implementations of cryptographic primitives.This paper goes one step further in the security and performances achievements with a new automatic tool named Tornado. In a nutshell, from the high-level description of a cryptographic primitive, Tornado produces a functionally equivalent bitsliced masked implementation at any desired order proven secure in the probing model, but additionally in the so-called register probing model which much better fits the reality of software implementations. This framework is obtained by the integration of Usuba with tightPROVE+, which extends tightPROVE with the ability to verify the security of implementations in the register probing model and to fix them with inserting refresh gadgets at carefully chosen locations accordingly.We demonstrate Tornado on the lightweight cryptographic primitives selected to the second round of the NIST competition and which somehow claimed to be masking friendly. It advantageously displays performances of the resulting masked implementations for several masking orders and prove their security in the register probing model

A methodology for investigating dust model performance using synergistic EARLINET/AERONET dust concentration retrievals

Systematic measurements of dust concentration profiles at a continental scale were recently made possible by the development of synergistic retrieval algorithms using combined lidar and sun photometer data and the establishment of robust remote-sensing networks in the framework of Aerosols, Clouds, and Trace gases Research InfraStructure Network (ACTRIS)/European Aerosol Research Lidar Network (EARLINET). We present a methodology for using these capabilities as a tool for examining the performance of dust transport models. The methodology includes considerations for the selection of a suitable data set and appropriate metrics for the exploration of the results. The approach is demonstrated for four regional dust transport models (BSC-DREAM8b v2, NMMB/BSC-DUST, DREAMABOL, DREAM8-NMME-MACC) using dust observations performed at 10 ACTRIS/EARLINET stations. The observations, which include coincident multi-wavelength lidar and sun photometer measurements, were processed with the Lidar-Radiometer Inversion Code (LIRIC) to retrieve aerosol concentration profiles. The methodology proposed here shows advantages when compared to traditional evaluation techniques that utilize separately the available measurements such as separating the contribution of dust from other aerosol types on the lidar profiles and avoiding model assumptions related to the conversion of concentration fields to aerosol extinction values. When compared to LIRIC retrievals, the simulated dust vertical structures were found to be in good agreement for all models with correlation values between 0.5 and 0.7 in the 1–6 km range, where most dust is typically observed. The absolute dust concentration was typically underestimated with mean bias values of -40 to -20 μg m−3 at 2 km, the altitude of maximum mean concentration. The reported differences among the models found in this comparison indicate the benefit of the systematic use of the proposed approach in future dust model evaluation studies

A diagnostic cohort study on the accuracy of 18-fluorodeoxyglucose (18FDG) positron emission tomography (PET)-CT for evaluation of malignancy in anterior mediastinal lesions: the DECiMaL study.

The aim of this study is to collate multi-institutional data to determine the value by defining the diagnostic performance of fluorodeoxyglucose positron emission tomography (FDG PET)/CT for malignancy in patients undergoing surgery with an anterior mediastinal mass in order to ascertain the clinical utility of PET/CT to differentiate malignant from benign aetiologies in patients presenting with an anterior mediastinal mass SETTING: DECiMaL Study is a multicentre, retrospective, collaborative cohort study in seven UK surgical sites.This article is freely available via Open Access. Click on the Additional Link above to access the full-text via the publisher's site