845 research outputs found
Phase Considerations in the Gas/Particle Partitioning of Organic Amines in the Atmosphere
Amines in the atmosphere are of interest because of their likely role in new particle formation, and because of anthropogenic emissions of amines at post-combustion carbon capture (PCCC) facilities. A conceptual framework for considering the partitioning of a monobasic amine (Am = unprotonated free-base form) from the gas phase to atmospheric particulate matter (PM) is presented for cases when the PM may be composed of multiple liquid phases. Three types of liquid phases are considered as being individually or simultaneously possible for absorptive uptake of atmospheric amines: w) a mostly water phase; α ) a mostly (by mass) organic phase that has at least some polarity (e.g., predominantly secondary organic aerosol (SOA), and may contain significant water on a mole fraction basis); and ß) a mostly organic phase that is less polar than an a phase (e.g., predominantly primary organic aerosol (POA), containing little water). That one or more salts may contain the aminium ion AmH+ (formed by protonation of Am) is subject to the fact that the trace levels of individual amines in the atmosphere make formation of pure solid such as AmHHSO4(s) exceedingly unlikely: when solid salts of AmH+ are indeed present, by far the most likely form is as a solid solution, e.g.,(NH+4)1-y(AmH+)HSO-4(s) where y \u3c\u3c1
Organic Particulate Matter Formation at Varying Relative Humidity Using Surrogate Secondary and Primary Organic Compounds with Activity Corrections in the Condensed Phase Obtained Using a Method Based on the Wilson Equation
Secondary organic aerosol (SOA) formation in the atmosphere is currently often modeled using a multiple lumped two-product (N · 2p) approach. The N · 2p approach neglects: 1) variation of activity coefficient (i) values and mean molecular weight MW in the particulate matter (PM) phase; 2) water uptake into the PM; and 3) the possibility of phase separation in the PM. This study considers these effects by adopting an (N ·2p)pMW, approach (is a phase index). Specific chemical structures are assigned to 25 lumped SOA compounds and to 15 representative primary organic aerosol (POA) compounds to allow calculation of i and MW values. The SOA structure assignments are based on chamber-derived 2p gas/particle partition coefficient values coupled with known effects of structure on vapor pressure pL,io (atm). To facilitate adoption of the (N · 2p)pMW, approach in large-scale models, this study also develops CP-Wilson.1 (Chang-Pankow-Wilson.1), a group-contribution ζi-prediction method that is more computationally economical than the UNIFAC model of Fredenslund et al. (1975). Group parameter values required by CP-Wilson.1 are obtained by fitting i values to predictions from UNIFAC. The (N · 2p)pMW,approach is applied (using CP-Wilson.1) to several real α-pinene/O3 chamber cases for high reacted hydrocarbon levels (HC400 to 1000 g m-3) when relative humidity (RH)50%. Good agreement between the chamber and predicted results is obtained using both the (N ·2p)pMW, and N ·2p approaches, indicating relatively small water effects under these conditions. However, for a hypothetical α-pinene/O3 case at HC=30 g m-3 and RH=50%, the (N·2p)pMW, approach predicts that water uptake will lead to an organic PM level that is more double that predicted by the N · 2p approach. Adoption of the (N · 2p)pMW, approach using reasonable lumped structures for SOA and POA compounds is recommended for ambient PM modeling
Identification of Cytotoxic Flavor Chemicals in Top-Selling Electronic Cigarette Refill Fluids.
We identified the most popular electronic cigarette (EC) refill fluids using an Internet survey and local and online sales information, quantified their flavor chemicals, and evaluated cytotoxicities of the fluids and flavor chemicals. "Berries/Fruits/Citrus" was the most popular EC refill fluid flavor category. Twenty popular EC refill fluids were purchased from local shops, and the ingredient flavor chemicals were identified and quantified by gas chromatography-mass spectrometry. Total flavor chemical concentrations ranged from 0.6 to 27.9 mg/ml, and in 95% of the fluids, total flavor concentration was greater than nicotine concentration. The 20 most popular refill fluids contained 99 quantifiable flavor chemicals; each refill fluid contained 22 to 47 flavor chemicals, most being esters. Some chemicals were found frequently, and several were present in most products. At a 1% concentration, 80% of the refill fluids were cytotoxic in the MTT assay. Six pure standards of the flavor chemicals found at the highest concentrations in the two most cytotoxic refill fluids were effective in the MTT assay, and ethyl maltol, which was in over 50% of the products, was the most cytotoxic. These data show that the cytotoxicity of some popular refill fluids can be attributed to their high concentrations of flavor chemicals
High concentrations of flavor chemicals are present in electronic cigarette refill fluids.
We characterized the flavor chemicals in a broad sample of commercially available electronic cigarette (EC) refill fluids that were purchased in four different countries. Flavor chemicals in 277 refill fluids were identified and quantified by gas chromatography-mass spectrometry, and two commonly used flavor chemicals were tested for cytotoxicity with the MTT assay using human lung fibroblasts and epithelial cells. About 85% of the refill fluids had total flavor concentrations >1 mg/ml, and 37% were >10 mg/ml (1% by weight). Of the 155 flavor chemicals identified in the 277 refill fluids, 50 were present at ≥1 mg/ml in at least one sample and 11 were ≥10 mg/ml in 54 of the refill fluids. Sixty-one% (170 out of 277) of the samples contained nicotine, and of these, 56% had a total flavor chemical/nicotine ratio >2. Four chemicals were present in 50% (menthol, triacetin, and cinnamaldehyde) to 80% (ethyl maltol) of the samples. Some products had concentrations of menthol ("Menthol Arctic") and ethyl maltol ("No. 64") that were 30 times (menthol) and 100 times (ethyl maltol) their cytotoxic concentration. One refill fluid contained cinnamaldehyde at ~34% (343 mg/ml), more than 100,000 times its cytotoxic level. High concentrations of some flavor chemicals in EC refill fluids are potentially harmful to users, and continued absence of any regulations regarding flavor chemicals in EC fluids will likely be detrimental to human health
Measurement of Enantiomer Percentages for Five Monoterpenes from six conifer species by cartridge-tube-based passive sampling adsorption–Thermal Desorption (ps-ATD)
Many monoterpenes have at least two different stereochemical forms, and many biosynthetic pathways are known to favor one product over the other(s). A rapid method was developed and used in the determination of the (-/+ role= presentation style= box-sizing: border-box; border-radius: 0px; display: inline; line-height: normal; word-spacing: normal; overflow-wrap: normal; white-space: nowrap; float: none; direction: ltr; max-width: none; max-height: none; min-width: 0px; min-height: 0px; border: 0px; padding: 0px; margin: 0px; position: relative; \u3e)-enantiomeric distributions for α-pinene, β-pinene, camphene, limonene, and β-phellandrene as emitted by plant material from six conifer species. The six species included the two pine species Pseudotsuga menziesii and Pinus ponderosa, as well as the four cypress species Chamaecyparis lawsoniana, Thuja plilcata, Juniperus chinensis, and Thuja occidentalis. The method involved passive sampling adsorption–thermal desorption (ps-ATD). During sampling, the cartridge tube was placed in a 60 mL glass vial with plant material for 1 h. Sample analytes were thermally transferred to a chiral gas chromatography (GC) column. Detection was by mass spectrometry (MS). The six species exhibited different emission patterns for the five monoterpenes in the -/+ role= presentation style= box-sizing: border-box; border-radius: 0px; display: inline; line-height: normal; word-spacing: normal; overflow-wrap: normal; white-space: nowrap; float: none; direction: ltr; max-width: none; max-height: none; min-width: 0px; min-height: 0px; border: 0px; padding: 0px; margin: 0px; position: relative; \u3e totals, although within a given species the distributions among the five monoterpenes were similar across multiple plants. β-pinene dominated in P. menziesii and P. ponderosa, and α-pinene dominated in T. plicata and T. occidentalis. The chiral separations revealed differences in the -/+ role= presentation style= box-sizing: border-box; border-radius: 0px; display: inline; line-height: normal; word-spacing: normal; overflow-wrap: normal; white-space: nowrap; float: none; direction: ltr; max-width: none; max-height: none; min-width: 0px; min-height: 0px; border: 0px; padding: 0px; margin: 0px; position: relative; \u3e enantiomeric distributions among the species. The (−)-enantiomers of α-pinene and β-pinene dominated strongly in P. menziesii and P. ponderosa; the (−)-enantiomer of β-phellandrene dominated in C. lawsoniana. The dependence of the method precision on percent enantiomer abundance is discussed
Transportation System Impacts on Bicyclists\u27 Air Pollution Risks: Considerations for System Design and Use
Health risks associated with air pollution uptake while bicycling are often cited as a potential drawback to increased bicycling in cities. This seminar will provide an overview of how roadway and travel characteristics impact bicyclists\u27 uptake of traffic-related air pollution. Specific considerations for planners and designers of urban transportation systems to mitigate risks for travelers will be discussed. In addition, the extent to which bicyclists themselves can unilaterally reduce their pollution uptake will be described. This seminar synthesizes findings from a recently completed doctoral dissertation at Portland State University and from the broader literature.https://pdxscholar.library.pdx.edu/trec_seminar/1017/thumbnail.jp
Candy Flavorings in Tobacco
Professor James F. Pankow reveals striking similarities between the patterns in the flavoring chemicals used in flavored tobacco products and those in popular candy and Kool-Aid products. The authors analyzed 12 artificially flavored candy and fruit drink products and compared them to 15 widely-available flavored tobacco products. They found significant overlap in the chemical signatures of the flavor chemicals. Several of the tobacco products contained flavor chemicals at much higher concentrations than in the non-tobacco products
Modeling the Formation of Secondary Organic Aerosol. 1. Application of Theoretical Principles to Measurements Obtained in the α-Pinene/, β-Pinene/, Sabinene/, Δ^3-Carene/, and Cyclohexene/Ozone Systems
Secondary organic aerosol (SOA) forms in the atmosphere when volatile parent compounds are oxidized to form low-volatility products that condense to yield organic particulate matter (PM). Under conditions of intense photochemical smog, from 40 to 80% of the particulate organic carbon can be secondary in origin. Because describing multicomponent condensation requires a compound-by-compound identification and quantification of the condensable compounds, the complexity of ambient SOA has made it difficult to test the ability of existing gas/particle (G/P) partitioning theory to predict SOA formation in urban air. This paper examines that ability using G/P data from past laboratory chamber experiments carried out with five parent hydrocarbons (HCs) (four monoterpenes at 308 K and cyclohexene at 298 K) in which significant fractions (61−100%) of the total mass of SOA formed from those HCs were identified and quantified by compound. The model calculations were based on a matrix representation of the multicomponent, SOA G/P distribution process. The governing equations were solved by an iterative method. Input data for the model included (i) ΔHC (μg m^(-3)), the amount of reacted parent hydrocarbon; (ii) the α values that give the total concentration T (gas + particle phase, ng m^(-3)) values for each product i according to Ti = 10^3 αiΔHC; (iii) estimates of the pure compound liquid vapor pressure P^o_L values (at the reaction temperature) for the products; and (iv) UNIFAC parameters for estimating activity coefficients in the SOA phase for the products as a function of SOA composition. The model predicts the total amount M_o (μg m^(-3)) of organic aerosol that will form from the reaction of ΔHC, the total aerosol yield Y (= M_o/ΔHC), and the compound-by-compound yield values Y_i. An impediment in applying the model is the lack of literature data on P^o_L values for the compounds of interest or even on P^o_L values for other, similarly low-volatility compounds. This was overcome in part by using the G/P data from the α-pinene and cyclohexene experiments to determine P^o_L values for use (along with a set of 14 other independent polar compounds) in calculating UNIFAC vapor pressure parameters that were, in turn, used to estimate all of the needed P^o_L values. The significant degree of resultant circularity in the calculations for α-pinene and cyclohexene helped lead to the good agreement that was found between the Y_i values predicted by the model, and those measured experimentally for those two compounds. However, the model was also able to predict the aerosol yield values from β-pinene, sabinene, and Δ^3-carene, for which there was significatly less circularity in the calculations, thereby providing evidence supporting the idea that given the correct input information, SOA formation can in fact be accurately modeled as a multicomponent condensation process
Eugenol, Menthol and other Flavour Chemicals in Kreteks and ‘white’ cigarettes purchased in Indonesia
Background Flavoured tobacco products are not restricted in Indonesia, a country with about 68 million adults who smoke. Most use clove-mixed tobacco cigarettes (‘kreteks’); non-clove (‘white’) cigarettes are also available. Although the use of flavour chemicals has been identified by WHO as promoting tobacco use, little has been reported for Indonesia about the levels of flavourants in either kreteks or ‘white cigarettes’. Methods 22 kretek brand variants and nine ‘white’ cigarette brand variants were purchased in Indonesia during 2021/2022; one of the kretek packs contained three colour-coded variants, giving a total sample number of 24 for the kreteks. Chemical analyses gave the mg/stick (=mg/(filter+rod)) values for 180 individual flavour chemicals that included eugenol (a clove-flavoured compound), four other clove-related compounds and menthol. Results Eugenol was present at significant levels in all 24 kreteks (2.8–33.8 mg/stick), but was essentially absent in all of the cigarettes. Menthol was present in 14 of 24 kreteks, with levels ranging from 2.8 to 12.9 mg/stick, and in five of the nine cigarettes, with levels ranging from 3.6 to 10.8 mg/stick. Other flavour chemicals were also found in many of the kretek and cigarette samples. Conclusions In this small sample, we found numerous variations of flavoured tobacco products offered by multinational and national companies in Indonesia. Given the body of evidence that flavours make tobacco products more appealing, regulation of clove-related compounds, menthol and other flavour chemicals should be considered in Indonesia
Ethyl Maltol, Vanillin, Corylone and other Conventional Confectionery-related Flavour Chemicals Dominate in Some E-cigarette Liquids Labelled ‘tobacco’ flavoured
Background The increased popularity of electronic cigarettes (e-cigarettes) has been linked to the abundance of flavoured products that are attractive to adolescents and young adults. In the last decade, e-cigarette designs have evolved through four generations that include modifications in battery power, e-cigarette liquid (e-liquid) reservoirs and atomiser units. E-liquids have likewise evolved in terms of solvent use/ratios, concentration and number of flavour chemicals, use of nicotine salts and acids, the recent increased use of synthetic cooling agents and the introduction of synthetic nicotine. Our current objective was to evaluate and compare the evolving composition of tobacco-flavoured e-liquids over the last 10 years. Methods Our extensive database of flavour chemicals in e-liquids was used to identify trends and changes in flavour chemical composition and concentrations. Results Tobacco-flavoured products purchased in 2010 and 2011 generally had very few flavour chemicals, and their concentrations were generally very low. In tobacco-flavoured refill fluids purchased in 2019 and Puff Bar Tobacco e-cigarettes, the total number and concentration of flavour chemicals were higher than expected. Products with total flavour chemicals \u3e10 mg/mL contained one to five dominant flavour chemicals (\u3e1 mg/mL). The most frequently used flavour chemicals in tobacco e-liquids were fruity and caramellic. Conclusions There is a need for continuous surveillance of e-liquids, which are evolving in often subtle and harmful ways. Chemical constituents of tobacco flavours should be monitored as they clearly can be doctored by manufacturers to have a taste that would appeal to young users
- …