69 research outputs found
Estimation of extracellular lipase enzyme produced by thermophilic bacillus sp. isolated from arid and semi-arid region of Rajasthan, India
Thermophilic organisms can be defined as microorganisms which are adapted to live at high temperatures. The enzymes produce by thermophilic bacteria are capable of catalyzing biochemical reactions at high temperatures. Thermophilic bacteria are able to produce thermostable lipase enzymes capable of degradation of lipid at temperatures higher than those of mesophilic bacteria. Therefore, the isolation of thermophilic bacteria from natural sources and their identification are quite useful in terms of discovering thermophilic lipase enzymes. Due to great temperature fluctuation in hot arid and semi-arid regions of Rajasthan, this area could serve as a good source for new thermophilic lipase producing bacteria with novel industrially important properties. The main objective of this research is the isolation and estimation of industrially important thermophilic lipase enzyme produced by thermophilic bacteria, isolated from arid and semi-arid region of Rajasthan. For this research purpose, soil samples were collected from Churu, Sikar and Jhunjunu regions of Rajasthan. A total of 16 bacterial strains were isolated, and among these bacterial isolates only two thermophilic lipase producing bacteria were identified. The thermophilic lipase enzyme was estimated by qualitative and quantitative experiments. The isolate was identified as Bacillus sp. by microscopic, biochemical and molecular characterization. The optimum enzyme activity was observed at pH 8, temperature 60°C and 5% salt concentration at 24 hrs time duration. Lipases are useful in a variety of biotechnological fields such as food and dairy (cheese ripening, flavour development), detergent, pharmaceutical (naproxen, ibuprofen), agrochemical (insecticide, pesticide) and oleochemical (fat and oil hydrolysis, biosurfactant synthesis) industries. Lipases can be further used in many newer areas where they can serve as potential biocatalysts. 

Evaluation of antidepressant and analgesic activity of tapentadol with mirtazapine: an experimental study
Background: Data comparing tapentadol with an antidepressant is limited. AÂ comparison of tapentadol with mirtazapine at different dose has not been performed, the other antidepressant in the same therapeutic class with a significant market share, has been undertaken. In the absence of relevant data to assess the place that tapentadol should occupy in the therapeutic arsenal, indirect comparisons are the most rigorous way to go. We conducted a study evaluate antidepressant and analgesic activity of tapentadol with mirtazapine at different doses in Swiss albino mice.Methods: Tapentadol was administered at 10, 20 and 40Â mg/kg (i.p) once daily for 14 days to swiss albino mice of either sex. The immobility period for antidepressant activity of mice were recorded in forced swim test and reaction time for analgesic activity of mice were recorded in tail flick test of the control and drug treated group. The antidepressant and analgesic activity of tapentadol (10, 20, 40Â mg/kg i.p) was compared with that of mirtazapine (3, 5, 7Â mg/kg i.p), administered for 14Â days.Results: Tapentadol produced better antidepressant at (20, 40Â mg/kg), but less at 10Â mg/kg and significant analgesic activity at all the three doses, as indicated by reduction in immobility times and increase in reaction time as compared to control. Mirtazapine produced no antinociceptive activity at 3Â mg/kg, but significant at 5, 7Â mg/kg and showed better antidepressant activity at all the three doses in mice. The result of this study indicates the better analgesic activity of tapentadol at all the doses and least antidepressant activity at 10Â mg/kg, as compared to mirtazapine which has shown better antidepressant activity at all the three doses but no analgesic activity at 3Â mg/kg.Conclusion: It can be concluded that tapentadol is a better drug in case of depression associated with pain compared to mirtazapine in mice
Trends in primary mental health care service use and subsequent self-harm in Western Sydney Australia : policy and workforce implications
Background: This study investigated the trends in primary mental health care (PMHC) service use and hospital-treated self-harm in Western Sydney (Australia). Methods: A data linkage study and descriptive ecological study of PMHC referrals investigated the trends in referrals, treatment attendance, hospital-treated self-harm, and health care practitioners (HCPs) for the period of 2013−2018 (n = 19,437). Results: There was a substantial increase in referrals from 2016. The majority of referrals were females (60.9%), those aged <45 years (71.3%), and those presenting with anxiety or affective disorders (78.9%). Referrals of those at risk of suicide increased from 9.7% in 2013 to17.8% in 2018. There were 264 (2.2%) cases of subsequent hospital-treated self-harm, with higher rates among those at risk of suicide and those who attended <6 sessions. The number of HCPs per referral also increased from 2013, as did waiting times for treatment initiation. Conclusion: Individuals presenting to PMHC services at risk of suicide, and who subsequently presented to a hospital setting following self-harm, were more likely to either not attend services following a referral or to attend fewer services. This trend occurred in the context of an increase in the number of clients per HCP, suggesting workforce capacity has not kept pace with demand
Plasma modification of poly(2-heptadecyl-4-vinylthieno[3,4-d]thiazole) low bandgap polymer and its application in solar cells
For the first time, we here propose a green methodology to modify a low bandgap polymer for highly efficient solar cells using atmospheric pressure plasma jet or soft plasma operating on different feeding gases (air, Ar and N-2). The physical properties of the modified polymer were investigated using conductivity measurements, UV-visible spectroscopy, photoluminescence spectroscopy, X-ray photoelectron spectroscopy, cyclic voltammograms, atomic force microscopy, cathodoluminescence and confocal Raman spectroscopy. Further, we examined the variation of the work function of the polymer before and after plasma treatment using a gamma-focused ion beam. Additionally, photovoltaic cells based on the plasma-modified polymer having ITO/PEDOT:PSS/PHVTT (with or without plasma modification): PC71BM/LiF/Al configuration were fabricated and then characterized. We found that the power conversion efficiency (PCE) of the plasma-modified polymer increased dramatically as compared to the control polymer (without plasma treatment). PCE of the control polymer was found to be 4.11%, while after air, Ar and N-2 gas plasma treatment the polymer showed PCEs of 4.85%, 4.87% and 5.14% respectively. Thus, plasma treatment not only alters the surface properties, but also modifies the bulk properties (changes in HOMO and LUMO bandgap level). Hence, this work provides new dimensions to explore more about plasma and polymer chemistry
Intra-night optical flux and polarization variability of BL~Lacertae during its 2020 2021 high state
In this work, we report the presence of rapid intra-night optical variations
in both -- flux and polarization of the blazar BL Lacertae during its
unprecedented 2020--2021 high state of brightness. The object showed
significant flux variability and some color changes, but no firmly detectable
time delays between the optical bands. The linear polarization was also highly
variable in both -- polarization degree and angle (EVPA). The object was
observed from several observatories throughout the world, covering in a total
of almost 300 hours during 66 nights. Based on our results, we suggest, that
the changing Doppler factor of an ensemble of independent emitting regions,
travelling along a curved jet that at some point happens to be closely aligned
with the line of sight can successfully reproduce our observations during this
outburst. This is one of the most extensive variability studies of the optical
polarization of a blazar on intra-night timescales.Comment: 23 pages,7 figures, 5 Tables (2 as appendix). Accepted for
publication in MNRA
Optical intra-day variability of the blazar S5 0716+714
We present an extensive recent multi-band optical photometric observations of
the blazar S5 0716+714 carried out over 53 nights with two telescopes in India,
two in Bulgaria, one in Serbia, and one in Egypt during 2019 November -- 2022
December. We collected 1401, 689, 14726, and 165 photometric image frames in B,
V, R, and I bands, respectively. We montiored the blazar quasi-simultaneously
during 3 nights in B, V, R, and I bands; 4 nights in B, V, and R; 2 nights in
V, R, and I; 5 nights in B and R; and 2 nights in V and R bands. We also took
37 nights of data only in R band. Single band data are used to study intraday
flux variability and two or more bands quasi-simultaneous observations allow us
to search for colour variation in the source. We employ the power-enhanced
F-test and the nested ANOVA test to search for genuine flux and color
variations in the light curves of the blazar on intraday timescales. Out of 12,
11, 53, and 5 nights observations, intraday variations with amplitudes between
~3% and ~20% are detected in 9, 8, 31 and 3 nights in B, V, R, and I bands,
respectively, corresponding to duty cycles of 75%, 73%, 58% and 60%. These duty
cycles are lower than those typically measured at earlier times. On these
timescales color variations with both bluer-when-brighter and
redder-when-brighter are seen, though nights with no measurable colour
variation are also present. We briefly discuss possible explanations for this
observed intraday variability.Comment: 19 pages, 5 figures, 4 tables, Accepted for Publication in MNRA
CHSI costing study-Challenges and solutions for cost data collection in private hospitals in India
INTRODUCTION: Ayushman Bharat Pradhan Mantri Jan Aarogya Yojana (AB PM-JAY) has enabled the Government of India to become a strategic purchaser of health care services from private providers. To generate base cost evidence for evidence-based policymaking the Costing of Health Services in India (CHSI) study was commissioned in 2018 for the price setting of health benefit packages. This paper reports the findings of a process evaluation of the cost data collection in the private hospitals. METHODS: The process evaluation of health system costing in private hospitals was an exploratory survey with mixed methods (quantitative and qualitative). We used three approaches-an online survey using a semi-structured questionnaire, in-depth interviews, and a review of monitoring data. The process of data collection was assessed in terms of time taken for different aspects, resources used, level and nature of difficulty encountered, challenges and solutions. RESULTS: The mean time taken for data collection in a private hospital was 9.31 (± 1.0) person months including time for obtaining permissions, actual data collection and entry, and addressing queries for data completeness and quality. The longest time was taken to collect data on human resources (30%), while it took the least time for collecting information on building and space (5%). On a scale of 1 (lowest) to 10 (highest) difficulty levels, the data on human resources was the most difficult to collect. This included data on salaries (8), time allocation (5.5) and leaves (5). DISCUSSION: Cost data from private hospitals is crucial for mixed health systems. Developing formal mechanisms of cost accounting data and data sharing as pre-requisites for empanelment under a national insurance scheme can significantly ease the process of cost data collection
Studies on stability of bi-functional P3HT:PCBM:rubrene optoelectronic devices
vestigations are carried out for stability in photovoltaic response of bifunctional electroluminescent and photovoltaic devices, based on ternary blend of poly(3-hexylthiophene) (P3HT), phenyl [6,6']C-61 butyric acid methyl ester (PCBM), and 5,6,11,12-tetraphenylnaphthacene (rubrene). P3HT and PCBM are important and the most frequent materials used for photovoltaic applications, therefore, for relative comparison, photovoltaic cells were also prepared using a binary mixture of P3HT and PCBM. Devices based on the ternary blend exhibited better stability in all photovoltaic parameters and the lifetime was almost doubled, but their photovoltaic efficiency was lower than that of those based on the binary blend. Longer lifetime of ternary blend devices is because of a relatively better thermal, electrochemical, and morphological stabilities of the ternary blend system. However, the lower efficiencies are because of the reduced photo-current and low fill factor (FF) due to an increased recombination and introduction of defects/trapping sites by rubrene molecules
Model for the J-V characteristics of degraded polymer solar cells
An equivalent circuit model was developed for polymer solar cells (PSCs), which explains correctly their behavior under different test conditions. We examine here the validity of that model for degraded PSCs. For that purpose, investigations were carried out on solar cells based on the interpenetrating bulk heterojunctions of poly(3-hehylthiophene) and phenyl[6,6] C-61 butyric acid methyl ester. Current density-voltage (J-V) characteristics were measured in dark and under illumination at different time intervals. The characteristics of fresh solar cells are explained well by the developed model, with exponential dependence of photocurrent on applied voltage. However, the degraded characteristics showed space charge limited conduction and the characteristics could be explained well by the same model but with different voltage dependence of photocurrent. (C) 2013 American Institute of Physics
- …