754 research outputs found
A Framework for Incorporating the Impact of Water Quality on Water Supply Stress: An Example from Louisiana
Water of poor quality can directly impact the budget of water available for key user groups. Despite this importance, methods for quantifying the impact of water quality on water availability remain elusive. Here, we develop a new framework for incorporating the impact of water quality on water supply by modifying the Water Supply Stress Index (WaSSI). We demonstrate the usefulness of the framework by investigating the impact of high salinity waters on the availability of irrigation water for agriculture in Louisiana. The WaSSI was deconstructed into sectoral components such that the total available water supply could be reduced for a particular demand sector (agricultural irrigation in this example) based on available water quality information. The results for Louisiana highlight substantial impacts on water supply stress for farmers attributable to the landward encroachment of saline surface water and groundwater near the coast. Areas of high salinity near the coast also increased the competition for freshwater resources among the industrial, municipal, and agricultural demand sectors in the vicinities of the municipal areas of Lake Charles, Lafayette, and Baton Rouge, Louisiana. The framework developed here is easily adaptable for other water quality concerns and for other demand sectors, and as such can serve as a useful tool for water managers
The locus for an inherited cataract in sheep maps to ovine chromosome 6
Purpose: Cataracts are an important cause of blindness in humans but there are few large animal models available. One of these animal models is Ovine Heritable Cataract, a bilateral cortical cataract which develops after birth. This cataract has been used as a model for human cataracts in drug trials, but the gene responsible for the cataract trait is unknown. A
genetic test for cataract would improve the efficiency of the model by predicting which animals would develop cataracts. Identifying the genetic basis of the cataract would indicate its relevance to human cataract.
Methods: A genome scan was performed on 20 sheep chromosomes, representing 86% of the genome, to determine the position of the cataract locus. Additional microsatellite markers were tested on chromosome 6 using a larger pedigree. Fine mapping was performed using a breakpoint panel of 36 animals and novel microsatellite markers taken from the bovine genome assembly. All exons of the candidate gene nudix (nucleoside diphosphate linked moiety X)-type motif 9 (NUDT9) were sequenced in normal and affected sheep.
Results: Significant linkage was found between cataract status and markers on chromosome 6. Linkage analysis on the larger pedigree showed the most likely position of the cataract locus was between 112.3 and 132.9 cM from the centromere. During fine mapping, NUDT9 was considered as a positional candidate for the cataract gene because it was located within the linked interval and is expressed in the lens. The gene was ruled out as the cataract gene after extensive genotype
analysis, but a single nucleotide polymorphism (SNP) inside it provided a useful restriction fragment length polymorphism (RFLP) marker for further fine mapping. Twelve new markers were found and used to map the cataract locus to between 131.1 and 131.8 cM from the centromere.
Conclusions: A region of ovine chromosome 6 strongly linked to cataract has been identified, and a genetic test for cataract based on a SNP within this region has been developed. The best candidate gene within this region is AF4/FMR2 family, member 1 (AFF1), the mouse equivalent of which is associated with an inherited cataract.This research was supported by the New Zealand Foundation for
Research, Science, and Technology, grant number LINX0205
Multi-coil focused EMAT for characterisation of surface-breaking defects of arbitrary orientation
Electromagnetic Acoustic Transducers (EMATs) are a useful ultrasonic tool for non-destructive evaluation in harsh environments due to their non-contact capabilities, and their ability to operate through certain coatings. This work presents a new Rayleigh wave EMAT transducer design, employing geometric focusing to improve the signal strength and detection precision of surface breaking defects. The design is robust and versatile, and can be used at frequencies centered around 1 MHz. Two coils are used in transmission mode, which allows the usage of frequency-based measurement of the defect depth. Using a 2 MHz driving signal, a focused beam spot with a width of 1.3±0.25 mm and a focal depth of 3.7±0.25 mm is measured, allowing for defect length measurements with an accuracy of±0.4 mm and detection of defects as small as 0.5 mm depth and 1 mm length. A set of four coils held under one magnet is used to find defects at orientations offset from normal to the ultrasound beam propagation direction. This EMAT has a range which allows detection of defects which propagate at angles from 16° to 170° relative to the propagation direction over the range of 0–180°, and the setup has the potential to be able to detect defects propagating at all angles relative to the wave propagation direction if two coils are alternately employed as generation coils
Herd-level risk factors of bovine tuberculosis in England and Wales after the 2001 foot-and-mouth disease epidemic
We present the results of a 2005 case–control study of bovine tuberculosis (bTB) breakdowns in English and Welsh herds. The herd management, farming practices, and environmental factors of 401matched pairs of case and control herds were investigated to provide a picture of herd-level risk factors in areas of varying bTB incidence. A global conditional logistic regression model, with region-specific variants, was used to compare case herds that had experienced a confirmed bTB breakdown to contemporaneous control herds matched on region, herd type, herd size, and parish testing interval. Contacts with cattle from contiguous herds and sourcing cattle from herds with a recent history of bTB were associated with an increased risk in both the global and regional analyses. Operating a farm over several premises, providing cattle feed inside the housing, and the presence of badgers were also identified as significantly associated with an increased bTB risk. Steps taken to minimize cattle contacts with neighboring herds and altering trading practices could have the potential to reduce the size of the bTB epidemic. In principle, limiting the interactions between cattle and wildlife may also be useful; however this study did not highlight any specific measures to implement
The Approach to Ergodicity in Monte Carlo Simulations
The approach to the ergodic limit in Monte Carlo simulations is studied using
both analytic and numerical methods. With the help of a stochastic model, a
metric is defined that enables the examination of a simulation in both the
ergodic and non-ergodic regimes. In the non-ergodic regime, the model implies
how the simulation is expected to approach ergodic behavior analytically, and
the analytically inferred decay law of the metric allows the monitoring of the
onset of ergodic behavior. The metric is related to previously defined measures
developed for molecular dynamics simulations, and the metric enables the
comparison of the relative efficiencies of different Monte Carlo schemes.
Applications to Lennard-Jones 13-particle clusters are shown to match the model
for Metropolis, J-walking and parallel tempering based approaches. The relative
efficiencies of these three Monte Carlo approaches are compared, and the decay
law is shown to be useful in determining needed high temperature parameters in
parallel tempering and J-walking studies of atomic clusters.Comment: 17 Pages, 7 Figure
Rounding errors may be beneficial for simulations of atmospheric flow: results from the forced 1D Burgers equation
Social Network Analysis: Recent Achievements and Current Controversies
Network analysis has grown rapidly over the past two decades, but criticisms of the approach have increased as well This article focuses on several accomplishments and unresolved problems of the network approach In the first section. I illustrate the value of the network model in several substantive areas. focusing on studies of centrahty and power, network subgroups, and interorganizational relations I then discuss three issues over which the approach has provoked controversy the relation between network analysis and rational choice theory; the role of norms and culture, and the question of human agency I conclude with some examples of how network theorists are addressing these problemsPeer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/68023/2/10.1177_000169939403700403.pd
Aspects of Two-Photon Physics at Linear e+e- Colliders
We discuss various reactions at future e+e- and gamma-gamma colliders
involving real (beamstrahlung or backscattered laser) or quasi--real
(bremsstrahlung) photons in the initial state and hadrons in the final state.
The production of two central jets with large pT is described in some detail;
we give distributions for the rapidity and pT of the jets as well as the
di--jet invariant mass, and discuss the relative importance of various initial
state configurations and the uncertainties in our predictions. We also present
results for `mono--jet' production where one jet goes down a beam pipe, for the
production of charm, bottom and top quarks, and for single production of W and
Z bosons. Where appropriate, the two--photon processes are compared with
annihilation reactions leading to similar final states. We also argue that the
behaviour of the total inelastic gamma-gamma cross section at high energies
will probably have little impact on the severity of background problems caused
by soft and semi--hard (`minijet') two--photon reactions. We find very large
differences in cross sections for all two--photon processes between existing
designs for future e+e- colliders, due to the different beamstrahlung spectra;
in particular, both designs with >1 events per bunch crossing exist.Comment: 51 pages, 13 figures(not included
Tomato: a crop species amenable to improvement by cellular and molecular methods
Tomato is a crop plant with a relatively small DNA content per haploid genome and a well developed genetics. Plant regeneration from explants and protoplasts is feasable which led to the development of efficient transformation procedures.
In view of the current data, the isolation of useful mutants at the cellular level probably will be of limited value in the genetic improvement of tomato. Protoplast fusion may lead to novel combinations of organelle and nuclear DNA (cybrids), whereas this technique also provides a means of introducing genetic information from alien species into tomato. Important developments have come from molecular approaches. Following the construction of an RFLP map, these RFLP markers can be used in tomato to tag quantitative traits bred in from related species. Both RFLP's and transposons are in the process of being used to clone desired genes for which no gene products are known. Cloned genes can be introduced and potentially improve specific properties of tomato especially those controlled by single genes. Recent results suggest that, in principle, phenotypic mutants can be created for cloned and characterized genes and will prove their value in further improving the cultivated tomato.
Magnetic Reconnection in Extreme Astrophysical Environments
Magnetic reconnection is a basic plasma process of dramatic rearrangement of
magnetic topology, often leading to a violent release of magnetic energy. It is
important in magnetic fusion and in space and solar physics --- areas that have
so far provided the context for most of reconnection research. Importantly,
these environments consist just of electrons and ions and the dissipated energy
always stays with the plasma. In contrast, in this paper I introduce a new
direction of research, motivated by several important problems in high-energy
astrophysics --- reconnection in high energy density (HED) radiative plasmas,
where radiation pressure and radiative cooling become dominant factors in the
pressure and energy balance. I identify the key processes distinguishing HED
reconnection: special-relativistic effects; radiative effects (radiative
cooling, radiation pressure, and Compton resistivity); and, at the most extreme
end, QED effects, including pair creation. I then discuss the main
astrophysical applications --- situations with magnetar-strength fields
(exceeding the quantum critical field of about 4 x 10^13 G): giant SGR flares
and magnetically-powered central engines and jets of GRBs. Here, magnetic
energy density is so high that its dissipation heats the plasma to MeV
temperatures. Electron-positron pairs are then copiously produced, making the
reconnection layer highly collisional and dressing it in a thick pair coat that
traps radiation. The pressure is dominated by radiation and pairs. Yet,
radiation diffusion across the layer may be faster than the global Alfv\'en
transit time; then, radiative cooling governs the thermodynamics and
reconnection becomes a radiative transfer problem, greatly affected by the
ultra-strong magnetic field. This overall picture is very different from our
traditional picture of reconnection and thus represents a new frontier in
reconnection research.Comment: Accepted to Space Science Reviews (special issue on magnetic
reconnection). Article is based on an invited review talk at the
Yosemite-2010 Workshop on Magnetic Reconnection (Yosemite NP, CA, USA;
February 8-12, 2010). 30 pages, no figure
- …