Cooling and the SU(2) Instanton Vaccuum

We present results of an investigation into the nature of instantons in 4-dimensional pure gauge lattice $SU(2)$\ obtained from configurations which have been cooled using an under-relaxed cooling algorithm. We discuss ways of calibrating the cooling and the effects of different degrees of cooling, and compare our data for the shapes, sizes and locations of instantons with continuum results. In this paper we extend the ideas and techniques developed by us for use in $O(3)$, and compare the results with those obtained by other groups.Comment: 22 pages, LaTeX, uuencoded compressed tarfile of figures sent separately. Full (compressed) postscript version (118k)available from ftp://rock.helsinki.fi/pub/preprints/tft/Year1995/HU-TFT-95-21/paper.ps.

The Effect of Student-Directed Transition Planning With a Computer-Based Reading Support Program on the Self-Determination of Students With Disabilities

The purpose of this study was to investigate the impact of student-directed transition planning instruction (Whose Future Is It Anyway? curriculum) with a computer-based reading support program (Rocket Reader) on the self-determination, self-efficacy and outcome expectancy, and transition planning knowledge of students with disabilities. This study employed a pre- and postmeasure design with 168 middle school students with disabilities who were assigned to an experimental group (n = 86) and control group (n = 82). The results of the study demonstrated that self-determination, self-efficacy, and outcome expectancy for education planning improved through the application of Rocket Reader . Avenues are discussed for promoting middle school students’ self-determination in their transition planning, as are implications for future research.Yeshttps://us.sagepub.com/en-us/nam/manuscript-submission-guideline

On slip pulses at a sheared frictional viscoelastic/ non deformable interface

We study the possibility for a semi-infinite block of linear viscoelastic material, in homogeneous frictional contact with a non-deformable one, to slide under shear via a periodic set of ``self-healing pulses'', i.e. a set of drifting slip regions separated by stick ones. We show that, contrary to existing experimental indications, such a mode of frictional sliding is impossible for an interface obeying a simple local Coulomb law of solid friction. We then discuss possible physical improvements of the friction model which might open the possibility of such dynamics, among which slip weakening of the friction coefficient, and stress the interest of developing systematic experimental investigations of this question.Comment: 23 pages, 3 figures. submitted to PR

The signed loop approach to the Ising model: foundations and critical point

The signed loop method is a beautiful way to rigorously study the two-dimensional Ising model with no external field. In this paper, we explore the foundations of the method, including details that have so far been neglected or overlooked in the literature. We demonstrate how the method can be applied to the Ising model on the square lattice to derive explicit formal expressions for the free energy density and two-point functions in terms of sums over loops, valid all the way up to the self-dual point. As a corollary, it follows that the self-dual point is critical both for the behaviour of the free energy density, and for the decay of the two-point functions.Comment: 38 pages, 7 figures, with an improved Introduction. The final publication is available at link.springer.co

Curved Tails in Polymerization-Based Bacterial Motility

The curved actin ``comet-tail'' of the bacterium Listeria monocytogenes is a visually striking signature of actin polymerization-based motility. Similar actin tails are associated with Shigella flexneri, spotted-fever Rickettsiae, the Vaccinia virus, and vesicles and microspheres in related in vitro systems. We show that the torque required to produce the curvature in the tail can arise from randomly placed actin filaments pushing the bacterium or particle. We find that the curvature magnitude determines the number of actively pushing filaments, independent of viscosity and of the molecular details of force generation. The variation of the curvature with time can be used to infer the dynamics of actin filaments at the bacterial surface.Comment: 8 pages, 2 figures, Latex2

Dairy foods, calcium, and risk of breast cancer overall and for subtypes defined by estrogen receptor status: a pooled analysis of 21 cohort studies

Background: Epidemiologic studies examining the relations between dairy product and calcium intakes and breast cancer have been inconclusive, especially for tumor subtypes. Objective: To evaluate the associations between intakes of specific dairy products and calcium and risk of breast cancer overall and for subtypes defined by estrogen receptor (ER) status. Method: We pooled the individual-level data of over 1 million women who were followed for a maximum of 8-20 years across studies. Associations were evaluated for dairy product and calcium intakes and risk of incident invasive breast cancer overall (n = 37,861 cases) and by subtypes defined by ER status. Study-specific multivariable hazard ratios (HRs) were estimated and then combined using random-effects models. Results: Overall, no clear association was observed between the consumption of specific dairy foods, dietary (from foods only) calcium, and total (from foods and supplements) calcium, and risk of overall breast cancer. Although each dairy product showed a null or very weak inverse association with risk of overall breast cancer (P, test for trend >0.05 for all), differences by ER status were suggested for yogurt and cottage/ricotta cheese with associations observed for ER-negative tumors only (pooled HR = 0.90, 95% CI: 0.83, 0.98 comparing >= 60 g/d with = 25 g/d with Conclusion: Our study shows that adult dairy or calcium consumption is unlikely to associate with a higher risk of breast cancer and that higher yogurt and cottage/ricotta cheese intakes were inversely associated with the risk of ER-negative breast cancer, a less hormonally dependent subtype with poor prognosis. Future studies on fermented dairy products, earlier life exposures, ER-negative breast cancer, and different racial/ethnic populations may further elucidate the relation

Analysis of spherical geometry finite element transport solutions in the thick diffusion limit

An asymptotic analysis if performed on a family of discontinuous finite element methods (DFEMs) for spherical geometry transport. It is found that transport methods of this type transition into discrete versions of the spherical geometry diffusion equation in the thick diffusion limit with boundary conditions that may, in general, be inaccurate. A linear DFEM method has been designed such that its asymptotic diffusion boundary conditions are accurate. In a related development, the asymptotic diffusion equation is used to accelerate the transport calculation and the iterative scheme is fully described. The results of the analysis are confirmed by numerical testing of the specific case of linear elements. 5 refs., 2 figs., 1 tab

Management of visual clutter in annotated 3D CAD models: A comparative study

The use of annotations in CAD models has been an active area of research because of their ability to connect design information to specific aspects of the model s geometry. The effectiveness of annotations is determined by the ability to clearly communicate information. However, annotations can quickly create clutter and confusion as they increase both in number and complexity. Consequently, efficient interaction and visualization mechanisms become crucial. Despite recent standardizations of procedures for the presentation of textual information in CAD models, no explicit guidelines are available as to how to make annotated models more readable and manageable. In this paper, we present the results of a comparative study of different mechanisms to manage visual clutter in annotated 3D CAD models and offer recommendations based on our findings. Our results show that even basic interaction mechanisms have a substantial impact on user s performanceCamba, J.; Contero, M.; Johnson, M. (2014). Management of visual clutter in annotated 3D CAD models: A comparative study. Lecture Notes in Computer Science. 8518:405-416. doi:10.1007/978-3-319-07626-3_37S4054168518Kajko-Mattsson, M.: The State of Documentation Practice within Corrective Maintenance. In: IEEE International Conference on Software Maintenance, pp. 354–363. IEEE Press, New York (2001)Van De Vanter, M.L.: The Documentary Structure of Source Code. Information and Software Technology 44, 767–782 (2002)Haouari, D., Sahraoui, H., Langlais, P.: How Good is Your Comment? A Study of Comments in Java Programs. In: International Symposium on Empirical Software Engineering and Measurement, pp. 137–146. IEEE Press, New York (2011)ASME Y14.41-2012 Digital Product Definition Data Practices. The American Society of Mechanical Engineers, New York (2012)ISO 16792:2006 Technical Product Documentation – Digital Product Definition Data Practices. Organisation Internationale de Normalisation, Genève, Suisse (2006)Boehm, B., Bayuk, J., Desmukh, A., Graybill, R., Lane, J.A., Levin, A., et al.: Systems 2020 Strategic Initiative. DoD Systems Engineering Research Center. Technical Report, SERC-2010-TR-009 (2010)Quintana, V., Rivest, L., Pellerin, R.: Measuring and Improving the Process of Engineering Change Orders in a Model-Based Definition Context. International Journal of Product Lifecycle Management 6(2), 138–160 (2012)Alducin-Quintero, G., Rojo, A., Plata, F., Hernández, A., Contero, M.: 3D Model Annotation as a Tool for Improving Design Intent Communication: A Case Study on its Impact in the Engineering Change Process. In: ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, pp. 349–356. ASME, New York (2012)Dorribo-Camba, J., Alducin-Quintero, G., Perona, P., Contero, M.: Enhancing Model Reuse through 3D Annotations: A Theoretical Proposal for an Annotation-Centered Design Intent and Design Rationale Communication. In: ASME International Mechanical Engineering Congress & Exposition. ASME, New York (2013)Ding, L., Davies, D., McMahon, C.: Sharing Information throughout a Product Lifecycle via Markup of Product Models. In: ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, pp. 1267–1275. ASME, New York (2008)Ding, L., Ball, A., Patel, M., Matthews, J., Mullineux, G.: Strategies for the Collaborative Use of CAD Product Models. In: Proceedings of ICED 2009, 17th International Conference on Engineering Design, vol. 8, pp. 123–134 (2009)Ding, L., Davies, D., McMahon, C.A.: The Integration of Lightweight Representation and Annotation for Collaborative Design Representation. Research in Engineering Design 20(3), 185–200 (2009)Boujut, J.F., Dugdale, J.: Design of a 3D Annotation Tool for Supporting Evaluation Activities in Engineering Design. Cooperative Systems Design 6, 1–8 (2006)Bracewell, R.H., Wallace, K.M.: A Tool for Capturing Design Rationale. In: 14th International Conference on Engineering Design. Paper no. DS31_1437FPB (2003)Patel, M., Ball, A., Ding, L.: Curation and Preservation of CAD Engineering Models in Product Lifecycle Management. In: 14th International Conference on Virtual Systems and Multimedia Dedicated to Digital Heritage, pp. 59–66 (2008)Li, C., McMahon, C., Newnes, L.: Annotation in Product Lifecycle Management: A Review of Approaches. In: ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, pp. 797–806 (2009)Ahlberg, C., Shneiderman, B.: Visual Information Seeking: Tight Coupling of Dynamic Query Filters with Starfield Displays. In: SIGCHI Conference on Human Factors in Computing Systems, pp. 313–317 (1994)Fishkin, K., Stone, M.C.: Enhanced Dynamic Queries via Movable Filters. In: SIGCHI Conference on Human Factors in Computing Systems, pp. 415–420 (1995)Noyes, L.: The Positioning of Type on Maps: The Effect of Surrounding Material on Word Recognition Time. Human Factors 22(3), 353–360 (1980)Rosenholtz, R., Li, Y., Mansfield, J., Jin, Z.: Feature Congestion: A Measure of Display Clutter. In: SIGCHI Conference on Human Factors in Computing Systems, pp. 761–770 (2005)Tufte, E.R.: The Visual Display of Quantitative Information. Graphics Press, Cheshire (1983)Ellis, G., Dix, A.: A Taxonomy of Clutter Reduction for Information Visualisation. IEEE Transactions on Visualization and Computer Graphics 13(6), 1216–1223 (2007)Wolfe, J.M.: Guided Search 2.0: A Revised Model of Visual Search. Psychonomic Bulletin & Review 1(2), 202–238 (1994)Palmer, J.: Set-size Effects in Visual Search: the Effect of Attention is Independent of the Stimulus for Simple Tasks. Vision Research 34, 1703–1721 (1994)Rosenholtz, R.: Search asymmetries? What search asymmetries? Perception & Psychophysics 63(3), 476–489 (2001)Woodruff, A., Landay, J., Stonebraker, M.: Constant Information Density in Zoomable Interfaces. In: Working Conference on Advanced Visual Interfaces, pp. 57–65 (1998)Ellis, G., Bertini, E., Dix, A.: The Sampling Lens: Making Sense of Saturated Visualisations. In: Extended Abstracts on Human Factors in Computing Systems, pp. 1351–1354 (2005)Ellis, G., Dix, A.: Enabling Automatic Clutter Reduction in Parallel Coordinate Plots. IEEE Transactions on Visualization and Computer Graphics 12(5), 717–723 (2006)Frank, A.U., Timpf, S.: Multiple Representations for Cartographic Objects in a Multi-scale Tree – An Intelligent Graphical Zoom. Computers & Graphics 18(6), 823–829 (1994)Cipriano, G., Gleicher, M.: Text Scaffolds for Effective Surface Labeling. IEEE Transactions on Visualization and Computer Graphics 14(6), 1675–1682 (2008)Stein, T., Décoret, X.: Dynamic Label Placement for Improved Interactive Exploration. In: 6th International Symposium on Non-Photorealistic Animation and Rendering, pp. 15–21 (2008)Ali, K., Hartmann, K., Strothotte, T.: Label Layout for Interactive 3D Illustrations. Journal of WSCG 13(1), 1–8 (2005)Götzelmann, T., Hartmann, K., Strothotte, T.: Agent-Based Annotation of Interactive 3D Visualizations. In: Butz, A., Fisher, B., Krüger, A., Olivier, P. (eds.) SG 2006. LNCS, vol. 4073, pp. 24–35. Springer, Heidelberg (2006

Possible origins of macroscopic left-right asymmetry in organisms

I consider the microscopic mechanisms by which a particular left-right (L/R) asymmetry is generated at the organism level from the microscopic handedness of cytoskeletal molecules. In light of a fundamental symmetry principle, the typical pattern-formation mechanisms of diffusion plus regulation cannot implement the "right-hand rule"; at the microscopic level, the cell's cytoskeleton of chiral filaments seems always to be involved, usually in collective states driven by polymerization forces or molecular motors. It seems particularly easy for handedness to emerge in a shear or rotation in the background of an effectively two-dimensional system, such as the cell membrane or a layer of cells, as this requires no pre-existing axis apart from the layer normal. I detail a scenario involving actin/myosin layers in snails and in C. elegans, and also one about the microtubule layer in plant cells. I also survey the other examples that I am aware of, such as the emergence of handedness such as the emergence of handedness in neurons, in eukaryote cell motility, and in non-flagellated bacteria.Comment: 42 pages, 6 figures, resubmitted to J. Stat. Phys. special issue. Major rewrite, rearranged sections/subsections, new Fig 3 + 6, new physics in Sec 2.4 and 3.4.1, added Sec 5 and subsections of Sec