4,144 research outputs found
Conceptual design study of advanced acoustic composite nacelle
Conceptual nacelle designs for wide-bodied and for advanced-technology transports were studied with the objective of achieving significant reductions in community noise with minimum penalties in airplane weight, cost, and in operating expense by the application of advanced composite materials to nacelle structure and sound suppression elements. Nacelle concepts using advanced liners, annular splitters, radial splitters, translating centerbody inlets, and mixed-flow nozzles were evaluated and a preferred concept selected. A preliminary design study of the selected concept, a mixed flow nacelle with extended inlet and no splitters, was conducted and the effects on noise, direct operating cost, and return on investment determined
HFL-10 lifting body flight control system characteristics and operational experience
A flight evaluation was made of the mechanical hydraulic flight control system and the electrohydraulic stability augmentation system installed in the HL-10 lifting body research vehicle. Flight tests performed in the speed range from landing to a Mach number of 1.86 and the altitude range from 697 meters (2300 feet) to 27,550 meters (90,300 feet) were supplemented by ground tests to identify and correct structural resonance and limit-cycle problems. Severe limit-cycle and control sensitivity problems were encountered during the first flight. Stability augmentation system structural resonance electronic filters were modified to correct the limit-cycle problem. Several changes were made to control stick gearing to solve the control sensitivity problem. Satisfactory controllability was achieved by using a nonlinear system. A limit-cycle problem due to hydraulic fluid contamination was encountered during the first powered flight, but the problem did not recur after preflight operations were improved
Optical read out and feedback cooling of a nanostring optomechanical cavity
Optical measurement of the motion of a 940 kHz mechanical resonance of a
silicon nitride nanostring resonator is demonstrated with a read out noise
imprecision reaching 37 dB below that of the resonator's zero-point
fluctuations. Via intensity modulation of the optical probe laser, radiation
pressure feedback is used to cool and damp the mechanical mode from an initial
room temperature occupancy of (K)
down to a phonon occupation of , representing a
mode temperature of mK. The five decades of cooling is enabled
by the system's large single-photon cooperativity and high
quantum efficiency of optical motion detection ().Comment: 13 pages, 13 figure
Development and applications of a model for cellular response to multiple chemotactic cues
The chemotactic response of a cell population to a single chemical species has been characterized experimentally for many cell types and has been extensively studied from a theoretical standpoint. However, cells frequently have multiple receptor types and can detect and respond chemotactically to more than one chemical. How these signals are integrated within the cell is not known, and we therefore adopt a macroscopic phenomenological approach to this problem. In this paper we derive and analyze chemotactic models based on partial differential (chemotaxis) equations for cell movement in response to multiple chemotactic cues. Our derivation generalizes the approach of Othmer and Stevens [29], who have recently developed a modeling framework for studying different chemotactic responses to a single chemical species. The importance of such a generalization is illustrated by the effect of multiple chemical cues on the chemotactic sensitivity and the spatial pattern of cell densities in several examples. We demonstrate that the model can generate the complex patterns observed on the skin of certain animal species and we indicate how the chemotactic response can be viewed as a form of positional indicator
Land Fragmentation and Water Utilization in Relation to Their Social Milieu, Paragonah, Utah
Practices of land use in Utah show need for community action aimed at more adequate utilization of land and water resources. Use of land for crop production in Utah is limited by topography, soil type, elevation, climate, and moisture. Because of limitations imposed, only a small portion of the land area may be used for cultivated farming. As a rule, large land holdings in Utah are not regularly tilled but are used as range for raising livestock
Thermal surveillance of Cascade Range volcanoes using ERTS-1 multispectral scanner, aircraft imaging systems, and ground-based data communication platforms
A combination of infrared images depicting areas of thermal emission and ground calibration points have proved to be particularly useful in plotting time-dependent changes in surface temperatures and radiance and in delimiting areas of predominantly convective heat flow to the earth's surface in the Cascade Range and on Surtsey Volcano, Iceland. In an integrated experiment group using ERTS-1 multispectral scanner (MSS) and aircraft infrared imaging systems in conjunction with multiple thermistor arrays, volcano surface temperatures are relayed daily to Washington via data communication platform (DCP) transmitters and ERTS-1. ERTS-1 MSS imagery has revealed curvilinear structures at Lassen, the full extent of which have not been previously mapped. Interestingly, the major surface thermal manifestations at Lassen are aligned along these structures, particularly in the Warner Valley
Design of photonic crystal microcavities for cavity QED
We discuss the optimization of optical microcavity designs based on 2D
photonic crystals for the purpose of strong coupling between the cavity field
and a single neutral atom trapped within a hole. We present numerical
predictions for the quality factors and mode volumes of localized defect modes
as a function of geometric parameters, and discuss some experimental challenges
related to the coupling of a defect cavity to gas-phase atoms.Comment: 12 pages, 16 figure
Photoluminescence measurements of quantum-dot-containing semiconductor microdisk resonators using optical fiber taper waveguides
Fiber taper waveguides are used to improve the efficiency of room temperature
photoluminescence measurements of AlGaAs microdisk resonant cavities with
embedded self-assembled InAs quantum dots. As a near-field collection optic,
the fiber taper improves the collection efficiency from microdisk lasers by a
factor of ~ 15-100 times in comparison to conventional normal incidence
free-space collection techniques. In addition, the fiber taper can serve as a
efficient means for pumping these devices, and initial measurements employing
fiber pumping and collection are presented. Implications of this work towards
chip-based cavity quantum electrodynamics experiments are discussed.Comment: 10 pages, 7 figure
Nonlinear radiation pressure dynamics in an optomechanical crystal
Utilizing a silicon nanobeam optomechanical crystal, we investigate the
attractor diagram arising from the radiation pressure interaction between a
localized optical cavity at nm and a mechanical resonance at
GHz. At a temperature of K, highly nonlinear
driving of mechanical motion is observed via continuous wave optical pumping.
Introduction of a time-dependent (modulated) optical pump is used to steer the
system towards an otherwise inaccessible dynamically stable attractor in which
mechanical self-oscillation occurs for an optical pump red-detuned from the
cavity resonance. An analytical model incorporating thermo-optic effects due to
optical absorption heating is developed, and found to accurately predict the
measured device behavior.Comment: 5 pages, 3 figure
On the dynamic tensile strength of Zirconium
Despite its fundamental nature, the process of dynamic tensile failure (spall) is poorly understood. Spall initiation via cracks, voids, etc, before subsequent coalesce, is known to be highly microstructure-dependant. In particular, the availability of slip planes and other methods of plastic deformation controls the onset (or lack thereof) of spall. While studies have been undertaken into the spall response of BCC and FCC materials, less attention has paid to the spall response of highly anisotropic HCP materials. Here the dynamic behaviour of zirconium is investigated via plate-impact experiments, with the aim of building on an ongoing in-house body of work investigating these highly complex materials. In particular, in this paper the effect of impact stress on spall in a commercially sourced Zr rod is considered, with apparent strain-rate softening highlighted
- …