Pigment characterisation in Australian rock art: A review of modern instrumental methods of analysis

© 2017 The Author(s). The many thousands of Aboriginal rock art sites extending across Australia represent an important cultural record. The styles and materials used to produce such art are of great interest to archaeologists and those concerned with the protection of these significant works. Through an analysis of the mineral pigments utilised in Australian rock art, insight into the age of paintings and practices employed by artists can be gained. In recent years, there has been an expansion in the use of modern analytical techniques to investigate rock art pigments and this paper provides a review of the application of such techniques to Australian sites. The types of archaeological information that may be extracted via chemical analysis of specimens collected from or at rock art sites across the country are discussed. A review of the applicability of the techniques used for elemental analysis and structural characterisation of rock art pigments is provided and how future technological developments will influence the discipline is investigated

Investigation of autoclaved cement systems with reactive MgO and Al <inf>2</inf>O<inf>3</inf>-SiO<inf>2</inf> rich fired clay brick

Portland cement (PC) is one of the world's most important building materials, as it is a fundamental component of concrete. However, the manufacture of PC is highly energy intensive and leads to the emission of carbon dioxide (CO2). One promising control measure is the use of industrial wastes and by-products as supplementary cementing materials (SCMs) in order to minimise PC consumption, thereby producing greener cement-based products. This study investigates mechanical properties and phase development of hydrothermally treated cement-ground quartz sand blends with the incorporation of fired clay-brick (CB) waste and reactive magnesia (MgO). The addition of CB waste in autoclaved PC-quartz mortar mixes showed that the alumina-silica rich CB waste was pozzolanic when the Al2O3 accelerated formation and increased crystallinity of Al substituted 1.1 nm tobermorite, resulting in the observed strength gain. Autoclaved mortar specimens incorporating reactive MgO showed a reduction in strength with increasing MgO addition. This was a result of dilution when the relative proportion of PC available for the formation of the strength contributing hydration products including tobermorite is decreased

Historical biogeography and ecological niche modelling of the Asimina-Disepalum clade (Annonaceae): role of ecological differentiation in Neotropical-Asian disjunctions and diversification in Asia

published_or_final_versio

The thermophysical properties of australian opal

The characterisation of the surface area and porosity of opals derived from Tintenbar, a volcanic environment, and Lightning Ridge, a sedimentary environment, using nitrogen gas adsorption at -196°C is reported. Both opal types were found to have relatively low surface areas and displayed little porosity. The low surface areas observed is indicative of the ability of silica to infill voids and interstices. Thermogravimetric analysis of the samples before and after degassing was carried out to determine the amount of water removed by the degassing process. Negligible difference was found in the water content before and after degassing in the case of the Lightning Ridge sedimentary opal, while the Tintenbar volcanic opal was found to have lost more that 60 per cent of its water during the degassing process. These differences were ascribed to the differences in the silica structure of the opals with the Lightning Ridge opal having a denser cage structure, which traps the molecular water, while a more open structure is postulated for the Tintenbar opal, allowing the water to be relatively easily removed

Historical biogeography of Asimina-Disepalum (Annonaceae): origins of tropical intercontinental disjunctions and diversifications in Southeast Asia

Oral Session: Secondary forestsStudies of tropical intercontinental disjunctions, common biogeographical patterns in flowering plants, enable insights into the origin of extant distributions and diversity patterns. We investigate the temporal origin of the Neotropical-Asian disjunction in the Asimina-Disepalum clade of the early-divergent angiosperm family Annonaceae, and temporal congruence with underlying palaeoclimatic and geological processes. Moreover, we aim to identify the geographical origin of Disepalum, and to infer dispersal and vicariance events as well as potentially correlated climate niche differentiation in the evolution of the genus in …postprin

Phylogenetic Reconstruction, Morphological Diversification and Generic Delimitation of Disepalum (Annonaceae)

Taxonomic delimitation of Disepalum (Annonaceae) is contentious, with some researchers favoring a narrow circumscription following segregation of the genus Enicosanthellum. We reconstruct the phylogeny of Disepalum and related taxa based on four chloroplast and two nuclear DNA regions as a framework for clarifying taxonomic delimitation and assessing evolutionary transitions in key morphological characters. Maximum parsimony, maximum likelihood and Bayesian methods resulted in a consistent, well-resolved and strongly supported topology. Disepalum s.l. is monophyletic and strongly supported, with Disepalum s. str. and Enicosanthellum retrieved as sister groups. Although this topology is consistent with both taxonomic delimitations, the distribution of morphological synapomorphies provides greater support for the inclusion of Enicosanthellum within Disepalum s.l. We propose a novel infrageneric classification with two subgenera. Subgen. Disepalum (= Disepalum s. str.) is supported by numerous synapomorphies, including the reduction of the calyx to two sepals and connation of petals. Subgen. Enicosanthellum lacks obvious morphological synapomorphies, but possesses several diagnostic characters (symplesiomorphies), including a trimerous calyx and free petals in two whorls. We evaluate changes in petal morphology in relation to hypotheses of the genetic control of floral development and suggest that the compression of two petal whorls into one and the associated fusion of contiguous petals may be associated with the loss of the pollination chamber, which in turn may be associated with a shift in primary pollinator. We also suggest that the formation of pollen octads may be selectively advantageous when pollinator visits are infrequent, although this would only be applicable if multiple ovules could be fertilized by each octad; since the flowers are apocarpous, this would require an extragynoecial compitum to enable intercarpellary growth of pollen tubes. We furthermore infer that the monocarp fruit stalks are likely to have evolved independently from those in other Annonaceae genera and may facilitate effective dispersal by providing a color contrast within the fruit.published_or_final_versio

A spectroscopic investigation of the weathering of a heritage Sydney sandstone

Infrared spectroscopy has been employed in a study of the degradation of heritage Sydney sandstone used in St. Mary's Cathedral in Sydney, Australia. Spectra were used to characterise the clay components taken from weathered and unweathered sandstone blocks removed from the Cathedral as part of a restoration programme. Two types of kaolin clays - kaolinite and its polymorph, dickite - have been identified. A higher amount of dickite present in the clay of weathered sandstone indicated that a kaolinite-to-dickite transformation occurs upon weathering. X-ray photoelectron spectroscopy was also used to confirm the presence of a more thermally stable polymorph of the kaolinite in the sandstone. © 2008 Elsevier B.V. All rights reserved

Hepatic artery thrombosis after pediatric liver transplantation a medical or surgical event

Hepatic artery thrombosis (HAT) is one of the most serious complications after orthotopic liver transplan¬tation, and is associated with a high morbidity and mor¬tality. This study retrospectively reviewed 66 liver transplants in children under the age of 10 years during1 a year-long period at a single institution.;A, total of 28 perioperative variables were analyzed to identify responsible factors of HAT. Of the 66 children, 18 (26%) developed HAT within 15 days after the transplant (HAT group); 29 (42%) had an uneventful postoperative course (control group). To avoid the possible influence of other complications 19 patients were excluded. Of the variables compared between the 2 study groups, three surgical factors (diameter of the hepatic artery-- greater or less than 3 mm; type of arterial anastomosis—end-to-end versus the use of an iliac graft or aortic conduit; and number of times the anastomosis was redone--one versus more than one), were found to be significantly different (P<.05) between HAT and control groups. Two medical factors also were significantly different: the use of intraoperative transfusion of fresh frozen plasma (FFP) and the administration of postoperative prophylactic anticoagulant treatment. A heparin and dextran-40 protocol appeared to be effective in preventing HAT (P<.02). Moreover, after multivariate analysis, anticoagulation therapy was demonstrated to with poor hepatic artery flow. © 1989 by The Williams and Wilkins Co

Development of shrinkage resistant cement-based materials using fibers

Copyright © 2011 by Research Publishing Services. Drying shrinkage is themajor contributor to volume changes in normal strength concrete. Several classes of shrinkage compensating admixtures are known to the concrete industry. This study deals with the literature review and categorization of different classes of shrinkage reducing fibers, especially polyethylene fibers, with the objective of introducing new types of shrinkage reducing fiber. In this investigation a special type of hydrophobic polyethylene minifibers has been used in different dosages in mortar samples. The experimental results on drying shrinkage aswellasonseveralotherpropertiesarereported.Thehydrophobicminifibersshowedremarkable improvement in shrinkage reduction even at very lowconcentrations (0.1%of cementweight)

Characterisation of Portland cement blended with pitchstone fines aiding carbon dioxide emission reduction

Climate change and global wanning present a significant challenge as unsustainable levels of greenhouse gas emissions arising from human activities continue to be emitted. The cement industry is responsible for between five and ten per cent of annual world carbon dioxide emissions; most arising from the manufacture of Portland cement (PC). An effective way of reducing emissions is by incorporating supplementary cementitious materials (SCMs) as partial PC replacements. SCMs are silicate or aluminosilicate based pozzolanic materials which, in finely divided form, combine with water and calcium hydroxide (lime), liberated by cement hydration, to form compounds exhibiting cementitious properties. Pitchstone is such an aluminosilicate and has the potential to act as an effective pozzolan for partial replacement of PC. In North Queensland, Australia, a vast deposit of pitchstone is mined and processed for expandable perlite aggregate. During the classification stage of the excavated natural material, waste pitchstone fines (PF) less than 0.5 mm in size are generated. This study evaluates the waste PF as a viable, eco-friendly pozzolan for the partial replacement of PC. The reactivity of the PF is compared to fly ash (FA), using the pozzolanic compressive strength activity index (SAI) after seven, 28, and 91 days ageing at 20 per cent and 40 per cent PC substitutions. PF was found to be comparable to FA as a pozzolan at 20 per cent PC substitution at all ages tested. However, for the 40 per cent substitution blends significant strength was only achieved at 91 days ageing for the FA blend. The pozzolanic reactivity was also investigated using thermogravimetric analysis to determine the degree of free lime present after 91 days. In all cases where an SCM was added, the free lime was observed to be consumed with increasing age