Perda de massa de cinco marcas de dentes artificiais disponíveis no mercado após escovação com três diferentes dentifrícios

Brushing is the most common cleansing method employed on complete dentures and it may damage the integrity of acrylic resin, the main component of this type of prosthesis. This study evaluated the abrasion resistance of artificial teeth with different number of acrylic layers, and the abrasiveness of specific and non-specific dentifrices for denture cleaning. The abrasion test was conducted by a tooth brushing device, using soft toothbrushes under load (200g). Sixty artificial teeth specimens were manufactured, 12 from each brand: Vipi-Dent Plus (Dental Vipi), Trubyte Biotone (Dentsply), Trilux (Ruthinium), Ivostar (Ivoclar) and SR Vivodent PE (Ivoclar). Three brands of dentifrices were selected: Colgate (Colgate-Palmolive), Bonyplus (Bonyf AG) and Dentu-Creme (Dentco). Distilled water was used as control. The brushing time was 100 minutes, at 356 strokes/minute. The specimens were weighed on an analytical balance before and after the abrasion test. Analysis of dentifrices' abrasive particles was made by scanning electron microscopy (SEM). Two-way ANOVA and Tukey tests were employed (alpha=0.05). The general mean of weight loss values were obtained: 6.1 mg (Ivostar); 6.0 mg (Trilux); 5.9 mg (Trubyte); 5.8 mg (Vipi); 5.3 mg (Vivodent). The abrasiveness difference among teeth brands was not statistically significant. The Colgate dentifrice produced the greatest weight reduction (10.1 mg), followed by Dentu-Creme (7.6 mg). Bonyplus was the least abrasive (2.4 mg), similar to the distilled water used as control group (3.1 mg) (p=0.05). It was concluded that all acrylic teeth presented similar abrasion resistance. Specific dentifrices for dentures tend to cause less damage to acrylic resin.A escovação é o método mais empregado para higienização de próteses totais e pode causar danos à resina acrílica, seu principal componente. Este estudo avaliou a resistência à abrasão de dentes de resina acrílica, com diferentes camadas de prensagem, frente a dentifrícios específicos e não específicos para higienização de dentaduras. O ensaio de abrasão foi realizado utilizando-se uma máquina de escovação, com escovas macias sob carga de 200g. Foram confeccionados 60 corpos-de-prova, 12 de cada marca comercial: Vipi-Dent Plus (Dental Vipi), Trubyte Biotone (Dentsply), Trilux (Ruthinium), Ivostar (Ivoclar), SR Vivodent PE (Ivoclar). Foram empregados os dentifrícios: Colgate (Colgate Palmolive), Bonyplus (Bonyf AG) e Dentu-Creme (Dentco). Água destilada foi utilizada como controle. O tempo de escovação foi 100 minutos, a 356 rotações/minuto. Os corpos-de-prova foram pesados em balança analítica antes e após os ensaios. As partículas abrasivas dos dentifrícios foram analisadas em microscopia eletrônica de varredura (MEV). Os testes ANOVA e Tukey (alfa=0,05) foram empregados. A perda de peso média dos dentes foi: 6,1 mg (Ivostar); 6,0 mg (Trilux); 5,9 mg (Trubyte); 5,8 mg (Vipi); 5,3 mg (Vivodent). Não houve diferença significante entre as marcas de dentes. O dentifrício Colgate causou maior perda de massa (10,1 mg), seguido pelo Dentu-Creme (7,6 mg). O Bonyplus foi o menos abrasivo (3,1 mg), sem diferença estatística em relação ao controle (2,4 mg) (p=0,05). Foi concluído que todos os dentes foram igualmente resistentes à abrasão, independentemente do número de prensagens. Dentifrícios específicos para próteses totais geraram menos danos à superfície acrílica

Eficácia de um evidenciador de biofilme e de três escovas no controle da higiene de próteses totais

OBJECTIVE: This report evaluated the efficacy of three brushes and one biofilm disclosing agent in complete denture cleansing. METHODS: Twenty-seven wearers of maxillary dentures were distributed into three groups and received different brushes: Oral B40, conventional toothbrush (Oral B); Denture, denture-specific brush (Condor); Johnson & Johnson, denture-specific brush (Johnson & Johnson). The 60-day experimental period was divided into two techniques: I - brushing (brush associated with a paste - Dentu Creme, Dentco) three times a day; II - brushing and daily application of 1% neutral red on the denture internal surface. Biofilm quantification was carried out weekly and the areas with dye biofilm were obtained by means of Image Tool 2.02 software. RESULTS: Biofilm removal was more effective during Technique II (Wilcoxon test: p=0.01) for the three groups of brushes. When the brushes were compared in Technique I, the Kruskal Wallis test indicated statistical difference between Denture X Johnson & Johnson and Denture X Oral B40, in which the Denture was more efficient. For Technique II, there was no statistical difference between brushes (p>;0.05). CONCLUSION: The disclosed application promoted more efficacy on biofilm removal, regardless of the brush used. Denture (Condor) was more efficient than the other brushes during Technique I.Este trabalho avaliou três escovas e um evidenciador de biofilme na higiene de próteses totais. Vinte e sete usuários de próteses totais superiores foram distribuídos em três grupos que receberam diferentes escovas: Oral B40 para dentes naturais (Oral B); Denture para dentadura (Condor) e Johnson & Johnson para dentadura (Johnson & Johnson). O período experimental de 60 dias foi dividido em 2 Técnicas: I - utilização das escovas associadas a um dentifrício (Dentu-Creme, Dentco) três vezes ao dia; II - escovação e aplicação diária do evidenciador Vermelho neutro a 1% na superfície interna da prótese total. A quantificação do biofilme foi realizada semanalmente e as áreas com biofilme corado foram medidas com o auxílio do software Image Tool 2.02. A remoção do biofilme foi mais efetiva durante a Técnica II (teste de Wilcoxon: p=0.01) nos três grupos. Comparando as escovas, na Técnica I o teste de Kruskal Wallis indicou diferença significante (p=0.05) entre Denture X Johnson & Johnson e Denture X OralB 40, sendo a Denture a mais eficaz. Na Técnica II, as escovas não apresentaram diferença estatisticamente significante (p>;0,05). A aplicação do evidenciador promoveu maior eficácia na remoção do biofilme, independentemente da escova utilizada. Na comparação das escovas na Técnica I, a escova Denture foi a mais eficiente

Behaviors and hygiene habits of complete denture wearers

In this study, a questionnaire was applied to patients from Ribeirão Preto Dental School, University of São Paulo, Brazil, to evaluate the hygiene methods and habits concerning the use of complete dentures, the age of dentures, and whether patients have been instructed on how to clean their dentures. The mean age of patients was 63.35 years, and most of them were females (82.08%). The results showed that 62.26% of the respondents had been using the same maxillary complete denture for more than 5 years, and 49.06% used the same mandible complete denture for more than 5 years. Of the patients interviewed, 58.49% slept with the dentures. Mechanical brushing was the most used cleaning method by the patients (100%), using water, dentifrice and toothbrush (84.91%). Most patients (51.89%) reported never having been instructed by their dentists as to how to clean their dentures. Based on the limitations of this study, it was concluded that the patients interviewed had limited knowledge about prosthetic hygiene and oral care. The method more used by patients was the mechanical method of brushing, most patients used the same complete dentures for more than 5 years and slept with the dentures.Foi realizada uma pesquisa na Faculdade de Odontologia de Ribeirão Preto - Universidade de São Paulo, por meio da aplicação de questionário, para avaliar os métodos de higiene e hábitos referentes ao uso de prótese total, idade das próteses, e se os pacientes têm sido instruídos em como limpar suas próteses. A idade média dos pacientes estudados foi 63,35 anos, a maioria (82,08%) do sexo feminino. Os resultados mostraram que 62,26% dos entrevistados usavam a mesma prótese total superior há mais de 5 anos, e 49,06% a mesma prótese total inferior. Dos pacientes entrevistados, 58,49% dormiam com as próteses. O método mais utilizado pelos pacientes foi o método mecânico de escovação (100% dos pacientes), utilizando água, pasta e escova de dente (84,91%). A maioria dos pacientes (51,89%) relatou nunca ter sido orientado pelos dentistas de como higienizar as próteses. Baseado nas limitações deste estudo, concluiu-se que os pacientes entrevistados tinham conhecimento limitado sobre higiene protética e cuidados bucais. O método de higiene mais utilizado foi a escovação da prótese, a maioria dos pacientes usavam a mesma prótese total há mais de cinco anos e dormiam com as próteses

Efficacy of three denture brushes on biofilm removal from complete dentures

The aim of this study was to compare the efficacy of three denture brushes (Bitufo-B; Medic Denture-MD; Colgate-C) on biofilm removal from upper and lower dentures using a specific dentifrice (Corega Brite). The correlation between biofilm levels on the internal and external surfaces of the upper and lower dentures was also evaluated. A microbiological assay was performed to assess the growth of colony-formed units (cfu) of Candida yeasts on denture surface. Thirty-three patients were enrolled in a 10-week trial divided in two stages: 1 (control) - three daily water rinses within 1 week; 2 - three daily brushings within 3 weeks per tested brush. Internal (tissue) and external (right buccal flange) surfaces of the complete dentures were disclosed (neutral red 1%) and photographed. Total denture areas and disclosed biofilm areas were measured using Image Tool 3.00 software for biofilm quantification. Dentures were boxed with #7 wax and culture medium (CHROMagarTM Candida) was poured to reproduce the internal surface. Statistical analysis by Friedman's test showed significant difference (p;0.01). Analysis by the Correlation test showed higher r values (B=0.78; MD=0.8341, C=0.7362) for the lower dentures comparing the surfaces (internal and external) and higher r values (B=0.7861, MD=0.7955, C=0.8298) for the external surface comparing the dentures (upper and lower). The results of the microbiological showed no significant difference (p>;0.01) between the brushes with respect to the frequency of the species of yeasts (chi-square test). In conclusion, all denture brushes evaluated in this study were effective in the removal of biofilm. There was better correlation of biofilm levels between the surfaces for the lower dentures, and between the dentures for the external surface. There was no significant difference among the brushes regarding the frequency of yeasts

Comparison of physical and mechanical properties of microwave-polymerized acrylic resin after disinfection in sodium hypochlorite solutions

This study evaluated the color stability, surface roughness and flexural strength of a microwave-polymerized acrylic resin after immersion in sodium hypochlorite (NaOCl), simulating 20 min of disinfection daily during 180 days. Forty disk-shaped (15 x 4 mm) and 40 rectangular (65 x 10 x 3 mm) specimens were prepared with a microwave-polymerized acrylic resin (Onda-Cryl). Specimens were immersed in either 0.5% NaOCl, 1% NaOCl, Clorox/Calgon and distilled water (control). Color measurements were determined by a portable colorimeter. Three parallel lines, separated by 1.0 mm, were registered on each specimen before and after immersion procedures to analyze the surface roughness. The flexural strength was measured using a 3-point bending test in a universal testing machine with a 50 kgf load cell and a crosshead speed of 1 mm/min. Data were analyzed statistically by ANOVA and Tukey's test (?=0.05). There was no statistically significant differences (p>0.05) among the solutions for color, surface roughness and flexural strength. It may be concluded that immersion in NaOCl solutions simulating short-term daily use during 180 days did not influence the color stability, surface roughness and flexural strength of a microwave-polymerized acrylic resin.Este estudo avaliou a estabilidade de cor, rugosidade superficial e resistência à flexão de resina acrílica polimerizada por microondas após desinfecção em hipoclorito de sódio, simulando 20 min de desinfecção diária durante 180 dias. Quarenta espécimes circulares (15 x 4 mm) e 40 retangulares (65 x 10 x 3 mm) foram preparados em resina acrílica polimerizada por microondas (Onda-Cryl). As amostras foram imersas em hipoclorito de sódio a 0,5%, hipoclorito de sódio a 1%, Clorox/Calgon e água destilada (controle). Medidas de cor foram determinadas por um espectrocolorímetro portátil. Três linhas paralelas, separadas por 1,0 mm, foram registradas em cada amostra antes e depois dos procedimentos de imersão para analisar a rugosidade superficial. A resistência à flexão foi medida utilizando um teste de flexão por 3 pontos em uma máquina universal de ensaios com uma célula de carga de 50 Kgf e uma velocidade de 1 mm/min. Os dados foram analisados estatisticamente por ANOVA e teste de Tukey (?=0,05). Não houve diferença estatisticamente significante (p>0,05) entre as soluções para cor, rugosidade superficial e resistência à flexão. Pode-se concluir que a imersão em soluções de hipoclorito de sódio, simulando um uso diário de curta duração durante 180 dias, não influenciou a estabilidade de cor, rugosidade superficial e resistência à flexão de resina acrílica polimerizada por microondas.FAPESPCNP

Biofilm disclosing agents in complete denture: clinical and antimicrobial evaluation

Este trabalho avaliou a capacidade em corar, a facilidade de remoção e a ação antimicrobiana de evidenciadores de biofilme dental em prótese total. A capacidade em corar foi avaliada por método visual aplicando-se evidenciadores sobre a superfície interna da prótese total superior. Após fotografia, as próteses coradas foram escovadas (escova e dentifrício específicos para prótese total) e novamente fotografadas. Os diapositivos foram projetados em folhas de papel (aumento de 10 X); as áreas total e corada das próteses contornadas com grafite, recortadas e pesadas, para obtenção, em porcentagem, dos resultados da facilidade de remoção. A ação antimicrobiana foi avaliada pelo método de difusão em ágar e os resultados obtidos pela medida dos aros e halos de inibição formados. A melhor capacidade em corar foi apresentada pelo azul de metileno (0,05%), eritrosina (5%), fluoresceína sódica (1%), Replak e vermelho neutro (1%). Eosina (1%), fluoresceína sódica (1%) e eritrosina (5%) apresentaram a maior facilidade de remoção. Não apresentaram ação antimicrobiana eosina (1%), eritrosina (5%), fluoresceína sódica (1%), proflavina (0,3%), Replak e vermelho neutro (1%). As soluções que apresentaram maior capacidade de corar, facilidade de remoção e ausência de ação antimicrobiana, requisitos necessários para auxiliar estudos que avaliam métodos de higiene e de orientação aos pacientes, foram eosina (1%), vermelho neutro (1%) e eritrosina (5%).This study evaluated the disclosing ability, removal facility and antimicrobial effect of biofilm disclosing agents applied on complete dentures. Disclosing ability was evaluated by means of the visual method. The solutions were applied on the internal surface of dentures. After being photographed, the dentures were brushed with denture-specific brush and dentifrice and photographed again. The obtained slides were projected on paper (10 X amplification) and the total and stained surfaces were outlined with graphite, cut off and weighed, in order to assess removal facility. The evaluation of antimicrobial effects was carried out by means of the method of diffusion in agar, and the results were obtained by measuring the length of the halos and rings. In terms of disclosing ability, the best solutions were 0.05% methylene blue, 5% erythrosin, 1% sodic fluorescein, Replak and 1% neutral red. One percent eosin, 1% sodic fluorescein and 5% erythrosin were the most easily removed solutions. One percent eosin, 5% erythrosin, 1% sodic fluorescein, 0.3% proflavine, Replak and 1% neutral red presented no antimicrobial effect. The solutions which presented the greatest disclosing ability and removal facility as well as absence of antimicrobial effect - which are essential requirements in the assessment of hygiene methods and guidance on oral health - were 1% eosin, 1% neutral red and 5% erythrosin

Analysis of the point-counting and planimetric methods in the quantification of the biofilm of dentures: a study of methodological validation

Dois métodos de quantificação de biofilme da dentadura (contagem de pontos e planímetro) foram testados e comparados com o método de pesagem de papel e Índice de Higiene de Prótese. Superfícies internas de 62 próteses foram coradas, fotografadas e as áreas total e do biofilme foram projetadas em papel e contornadas com grafite. O método de contagem de pontos (experimental 1) foi aplicado com uma grade de pontos. Para o método do planímetro (experimental 2), as áreas foram medidas com um planímetro digital e para o método de pesagem (controle 1) foram recortadas e pesadas em balança de precisão. No Índice de Higiene de Prótese (controle 2), utilizou-se a atribuição de escores. Os resultados mostraram uma porcentagem de concordância entre os métodos experimentais e controle 1 de 82% (contagem de pontos) e 95% (planímetro), bem como alto grau de correlação (r = 0,98; r = 0,99) entre os valores obtidos. Quando comparados com o controle 2, houve concordância em 55% (contagem de pontos) e 37% (planímetro) dos casos. Os métodos experimentais podem ser úteis em estudos clínicos para avaliação da eficácia de agentes de higienização.Two methods of quantification of the biofilm (point-counting and planimetric) were tested and compared with the paper-weighing method and with the Prosthesis Hygiene Index. The internal surfaces of 62 complete dentures were stained and photographed. The slides were projected on a paper sheet. The total area and the area covered with biofilm were contoured using a black pencil. The point-counting method (experimental 1) was carried out on a mesh of equidistant points. For the planimetric method (experimental 2), the areas of interest were measured by means of a digital planimeter. In the paper-weighing method (control 1) the areas of interest were cut and weighed on a precision scale. In the determination of the Prosthesis Hygiene Index (control 2), the accumulation of biofilm was estimated by means of a scoring method. The results revealed an agreement rate of 82% between the paper-weighing method and the point-counting method, and an agreement rate of 95% between the former and the planimetric method, which was confirmed by high coefficients of correlation (0.98 and 0.99, respectively). The comparison with the Prosthesis Hygiene Index resulted in 55% of agreement with the point-counting method and in 37% of agreement with the planimetric method. The experimental methods can be useful in clinical studies involving the evaluation of the performance of denture cleansers

Prevalence of mutans streptococci isolated from complete dentures and their susceptibility to mouthrinses

The aims of this study were to evaluate the incidence of mutans streptococci (MS - sessile form) on complete maxillary dentures after use of a specific denture paste, and to determine the minimum inhibitory concentration (MIC) and maximum inhibitory dilution (MID) of 3 oral mouthrinses: Cepacol, Plax and Periogard. Seventy-seven complete denture wearers were randomly assigned into 2 groups, according to the product used for denture cleaning: Control group - conventional dentifrice (Kolynos-Super White); and Test group: experimental denture cleaning paste. Denture biofilm was collected at baseline and after 90 and 180 days after treatment by brushing the dentures with saline solution. After decimal serial dilution, samples were seeded onto agar sucrose bacitracin to count colonies with morphological characteristics of MS. MS identification was performed by the sugar fermentation tests. After this procedure, brain heart infusion broth (BHI) was added to oral mouthrinses (Plax, Cepacol e Periogard) and seeded on Petri dishes. The colonies were seeded using the Steers multiplier and, after the incubation, the MIC and MID of the mouthrinses were calculated. The results showed an incidence of 74.0% (n=57) of MS in the 77 complete dentures examined in the study, being 76.3% (n=29) of the Control group (conventional dentifrice) and 71.8% (28) of the Test group (experimental denture cleaning paste). In both groups, the number of positive cases for MS decreased from day 0 to day 180. In the Test group there was a slight decrease in the incidence of Streptococcus mutans 90 days after use of the experimental denture cleaning paste, which was not observed in the Control group. As regards to mouthrinses, for both groups, Periogard showed antimicrobial action with the highest dilution, followed by Cepacol and Plax. In conclusion, the incidence of MS in complete dentures was high and Periogard was the mouthrinse with the strongest antimicrobial action against MS. The experimental denture cleaning paste showed a slight action against S. mutans after 90 days of treatment.O objetivo deste estudo foi avaliar a incidência de estreptococos do grupo mutans (forma séssil) de próteses totais superiores após o uso de uma pasta específica para higienização de próteses totais, bem como determinar a concentração inibitória mínima (CIM) e diluição inibitória máxima (DIM) de 3 enxaguatórios bucais: Cepacol, Plax e Periogard. Setenta e sete usuários de próteses totais foram distribuídos em 2 grupos: (A) grupo Controle: dentifrício convencional (Kolynos Super Branco) e (B) grupo Teste: pasta experimental para higiene de próteses (1). O biofilme das próteses foi coletado no início e após 90 e 180 dias dos tratamentos, por meio de escovação das próteses com solução salina. Após a diluição decimal seriada, as amostras foram semeadas em agar sacarose bacitracina para a contagem de colônias características de estreptococos do grupo mutans. A identificação dos estreptococos do grupo mutans foi realizada por meio de testes de fermentação de açúcares. Após este procedimento, o caldo de infusão de cérebro e coração (BHI) foi adicionado aos antissépticos (Plax, Cepacol e Periogard) e semeado em placas de Petri. As colônias foram semeadas usando o mutiplicador de Steers e após a incubação, a concentração inibitória mínima e a concentração inibitória máxima dos enxaguatórios foram calculadas. Os resultados mostraram que a incidência de estreptococos do grupo mutans nas 77 próteses totais examinadas foi de 74,0% (n=57), sendo 76,3% (n=29) do grupo Controle (pasta convencional) e 71,8% (n=28) do grupo Teste (pasta experimental). Em ambos os grupos, o número de casos positivos para estreptococos do grupo mutans diminuiu, do início (0 dias) para 180 dias. Houve uma pequena diminuição da incidência de Streptococcus mutans após 90 dias do uso da pasta experimental, o que não foi observado no grupo controle. Com relação aos enxaguatórios, para ambos os grupos, o Periogard apresentou atividade antimicrobiana com diluições maiores, seguido do Cepacol e Plax. Pôde-se concluir que a incidência de estreptococos do grupo mutans em próteses totais foi elevada e que o Periogard foi o enxaguatório com melhor ação antimicrobiana contra os estreptococos do grupo mutans. A pasta experimental mostrou uma pequena ação contra S. mutans após 90 dias de tratamento

Effect of experimental Ricinus communis solution for denture cleaning on the properties of acrylic resin teeth

This study evaluated Knoop hardness, surface roughness and color alteration of artificial teeth for dentures after immersion in water, 1% sodium hypochlorite and an experimental solution of 2% Ricinus communis (RC). Thirty specimens of Vipi, Biolux and Trilux were analyzed. Tests of Knoop hardness, surface roughness and color alteration were conducted immediately after specimen preparation (T0) and after two immersion protocols for 15 days (&#916;T15) and 183 days (&#916;T183). Data variation (&#916;T) were subjected to ANOVA and Tukey's test (p<0.05). At &#916;T15, Vipi presented hardness increase and Biolux presented the highest variation (p=0.01). RC caused the highest increase in hardness (p=0) and the lowest increase (p=0.005) in roughness. Biolux presented the lowest color alteration (p =0). At &#916;T183, Trilux underwent the highest hardness variation (p=0). Biolux presented an increase in roughness (p=0). There was no significant differences in color alteration among the artificial teeth (p=0.06) and among solutions (p=0.08) after 183 days of immersion. All solutions (distilled water, 1% sodium hypochlorite and 2% RC) caused alterations on the analyzed properties. Both immersion protocols caused alterations on the analyzed properties

Clinical trial for evaluation of Ricinus communis and sodium hypochlorite as denture cleanser

The development of opportunistic infections due to poor denture hygiene conditions justified the search for effective hygiene protocols for controlling denture biofilm. Objective This study evaluated Ricinus communis and sodium hypochlorite solutions in terms of biofilm removal ability, remission of candidiasis, antimicrobial activity, and participant satisfaction. Material and Methods It was conducted a controlled clinical trial, randomized, double-blind, and crossover. Sixty-four denture wearers with (n=24) and without candidiasis (n=40) were instructed to brush (3 times/day) and immerse their dentures (20 min/day) in different storage solutions (S1 / S2: 0.25% / 0.5% sodium hypochlorite; S3: 10% R. communis; S4: Saline).The trial period for each solution was seven days and a washout period of seven days was used before starting the use of another solution. The variables were analyzed at baseline and after each trial period. The biofilm of inner surfaces of maxillary dentures was disclosed, photographed, and total and dyed areas were measured (Image Tool software). The percentage of biofilm was calculated. Remission of candidiasis was assessed by visual scale and score were attributed. Antimicrobial activity was assessed by the DNA-Checkerboard hybridization method. Patient satisfaction was measured using a questionnaire. Results S1 (4.41±7.98%) and S2 (2.93±5.23%) were more effective then S3 (6.95±10.93%) in biofilm remotion(