Direct Measurement of Effective Magnetic Diffusivity in Turbulent Flow of Liquid Sodium

The first direct measurements of effective magnetic diffusivity in turbulent flow of electro-conductive fluids (the so-called beta-effect) under magnetic Reynolds number Rm >> 1 are reported. The measurements are performed in a nonstationary turbulent flow of liquid sodium, generated in a closed toroidal channel. The peak level of the Reynolds number reached Re \approx 3 10^6, which corresponds to the magnetic Reynolds number Rm \approx 30. The magnetic diffusivity of the liquid metal was determined by measuring the phase shift between the induced and the applied magnetic fields. The maximal deviation of magnetic diffusivity from its basic (laminar) value reaches about 50% .Comment: 5 pages, 6 figuser, accepted in PR

Mobile source of high-energy single-cycle terahertz pulses

The Teramobile laser facility was used to realize the first mobile source of high-power THz pulses. The source is based on a tilted-pulse-front pumping THz generation scheme optimized for application of terawatt laser pulses. Generation of 50-μJ single-cycle electromagnetic pulses centered at 0.19 THz with a repetition rate of 10Hz was obtained for incoming 700-fs 120-mJ near-infrared laser pulses. The corresponding laser-to-THz photon conversion efficiency is approximately 100

Langmuir wave linear evolution in inhomogeneous nonstationary anisotropic plasma

Equations describing the linear evolution of a non-dissipative Langmuir wave in inhomogeneous nonstationary anisotropic plasma without magnetic field are derived in the geometrical optics approximation. A continuity equation is obtained for the wave action density, and the conditions for the action conservation are formulated. In homogeneous plasma, the wave field E universally scales with the electron density N as E ~ N^{3/4}, whereas the wavevector evolution varies depending on the wave geometry

The mean electromotive force due to turbulence of a conducting fluid in the presence of mean flow

The mean electromotive force caused by turbulence of an electrically conducting fluid, which plays a central part in mean--field electrodynamics, is calculated for a rotating fluid. Going beyond most of the investigations on this topic, an additional mean motion in the rotating frame is taken into account. One motivation for our investigation originates from a planned laboratory experiment with a Ponomarenko-like dynamo. In view of this application the second--order correlation approximation is used. The investigation is of high interest in astrophysical context, too. Some contributions to the mean electromotive are revealed which have not been considered so far, in particular contributions to the $\alpha$--effect and related effects due to the gradient of the mean velocity. Their relevance for dynamo processes is discussed. In a forthcoming paper the results reported here will be specified to the situation in the laboratory and partially compared with experimental findings.Comment: 16 pages, 2 figures, in PRE pres

DC and transient current distribution analysis from self-field measurements on ITER PFIS conductor

Current reconstruction in cable-in-conduit conductors (CICC) cables is a crucial issue to determine cables performance in working conditions, and must be performed using inverse problem approaches as direct measurement is not feasible. The current distribution has been studied for the ITER Poloidal Field Insert Sample (PFIS) conductor using annular arrays of Hall probes placed in three different locations along the sample during the test campaign at the SULTAN facility. The measurement apparatus is also described in the paper, together with the approach to current reconstruction

Translation Lookaside Buffer on the 65-nm STG DICE Hardened Elements

This paper presents the design of hardened translation lookaside buffer based on Spaced Transistor Groups (STG) DICE cells in 65-nm bulk CMOS technology. The resistance to impacts of single nuclear particles is achieved by spacing transistors in two groups together with transistors of the output combinational logic. The elements contain two spaced identical groups of transistors. Charge collection from particle tracks by only transistors of just one of the two groups doesn’t lead to the cell upset. The proposed logical element of matching based on the STG DICE cell for a content-addressable memory was simulated using TCAD tool. The results show the resistance to impacts of single nuclear particles with linear energy transfer (LET) values up to 70 MeV×cm2/mg. Short-term noise pulses in combinational logic of the element can be observed in the range of LET values from 20 to 70 MeV×cm2/mg

Optimisation of ITER Nb3Sn CICCs for coupling loss, transverse electromagnetic load and axial thermal contraction

The ITER cable-in-conduit conductors (CICCs) are built up from sub-cable bundles, wound in different stages, which are twisted to counter coupling loss caused by time-changing external magnet fields. The selection of the twist pitch lengths has major implications for the performance of the cable in the case of strain sensitive superconductors, i.e. Nb3Sn, as the electromagnetic and thermal contraction loads are large but also for the heat load from the AC coupling loss. Reduction of the transverse load and warm-up cool-down degradation can be reached by applying longer twist pitches in a particular sequence for the sub-stages, offering a large cable transverse stiffness, adequate axial flexibility and maximum allowed lateral strand support. Analysis of short sample (TF conductor) data reveals that increasing the twist pitch can lead to a gain of the effective axial compressive strain of more than 0.3 % with practically no degradation from bending. For reduction of the coupling loss, specific choices of the cabling twist sequence are needed with the aim to minimize the area of linked strands and bundles that are coupled and form loops with the applied changing magnetic field, instead of simply avoiding longer pitches. In addition we recommend increasing the wrap coverage of the CS conductor from 50 % to at least 70 %. The models predict significant improvement against strain sensitivity and substantial decrease of the AC coupling loss in Nb3Sn CICCs, but also for NbTi CICCs minimization of the coupling loss can be achieved. Although the success of long pitches to transverse load degradation was already demonstrated, the prediction of the combination with low coupling loss needs to be validated by a short sample test.Comment: to be published in Supercond Sci Techno

Laplacian growth with separately controlled noise and anisotropy

Conformal mapping models are used to study competition of noise and anisotropy in Laplacian growth. For that, a new family of models is introduced with the noise level and directional anisotropy controlled independently. Fractalization is observed in both anisotropic growth and the growth with varying noise. Fractal dimension is determined from cluster size scaling with its area. For isotropic growth we find d = 1.7, both at high and low noise. For anisotropic growth with reduced noise the dimension can be as low as d = 1.5 and apparently is not universal. Also, we study fluctuations of particle areas and observe, in agreement with previous studies, that exceptionally large particles may appear during the growth, leading to pathologically irregular clusters. This difficulty is circumvented by using an acceptance window for particle areas.Comment: 13 pages, 15 figure