Cost Escalation in Nuclear Power

This report is concerned with the escalation of capital costs of nuclear central station power plants between the early 1960s and the present. The report presents an historical overview of the development of the nuclear power industry and cost escalation in the industry, using existing data on orders and capital costs. New data are presented on regulatory delays in the licensing process, derived from a concurrent study being carried on in the Social Science group at Caltech. The conclusions of the study are that nuclear capital costs have escalated more rapidly than the GNP deflator or the construction industry price index. Prior to 1970, cost increases are related to bottleneck problems in the nuclear construction and supplying industries and the regulatory process; intervenors play only a minor role in cost escalation. After 1970, generic changes introduced into the licensing process by intervenors (including environmental impact reviews, antitrust reviews, more stringent safety standards) dominate the cost escalation picture, with bottlenecks of secondary importance. Recent increases in the time from application for a construction permit to commercial operation are related not only to intervenor actions, but also to suspensions, cancellations or postponements of construction by utilities due to unfavorable demand or financing conditions

Caps on Hermitian varieties and maximal curves

A lower bound for the size of a complete cap of the polar space H(n,q²) associated to the non-degenerate Hermitian variety Un is given; this turns out to be sharp for even q when n=3. Also, a family of caps of H(n,q²) is constructed from Fq²-maximal curves. Such caps are complete for q even, but not necessarily for q odd

Overwrite fabrication and tuning of long period gratings

The central wavelengths of the resonance bands are critical aspect of the performance of long period gratings (LPGs) as sensors, particularly for devices designed to operate near the phase matching turning point (PMTP), where the sensitivity to measurements can vary rapidly. Generally, LPGs are characterized by their period, but the amplitude of the amplitude of the index modulation is also an important factor in determining the wavelengths of the resonance bands. Variations in fabrication between LPG sensors can increase or decrease the sensitivity of the LPG to strain, temperature or surrounding refractive index. Here, the technique of overwritten UV laser fabrication is demonstrated. It is shown that, on repeated overwriting, the resonance bands of an LPG exhibit significant wavelength shift, which can be monitored and which can be used to tune the resonance bands to the desired wavelengths. This technique is applied to periods in the range 100 to 200 µm, showing the cycle-to-cycle evolution of the resonance bands near the PMTPs of a number of cladding modes. The use of online monitoring is shown to reduce the resonance band sensor-to-sensor central wavelength variation from 10 nm to 3 nm

A solution to the slow stabilisation of surface pressure sensors based on the Wilhelmy method

Dynamic measurement of surface pressure is of particular interest in the field of Langmuir monolayers, where the change in surface pressure throughout an experiment can provide information on the properties of the monolayer forming material, or on the reaction kinetics of the monolayer’s interaction with other materials. One of the most common methods for the measurement of dynamic surface pressure is the Wilhelmy plate method. This method measures changes in the forces acting upon a thin plate of material at the air-water interface; this measurement is then converted to surface pressure. One version of this method, which uses filter paper plates at the air-water interface, is particularly popular due to their relatively low cost. However, it has been seen that the use of filter paper plates attached to a Wilhelmy balance requires an initial stabilisation period lasting several hours, during which the readings drift from the original baseline. Here the cause of this drift is explored, considering how changes in the weight of the plate over time influence the assumptions on which the surface pressure is derived from the measurements made by the Wilhelmy balance. A simple method for preventing this drift through pre-soaking of the filter paper plates is presented

A simple method for fabricating phase-shifted fibre Bragg gratings with flexible choice of centre wavelength

A simple technique for fabricating phase-shifted fibre Bragg gratings (PSFBGs) without the use of a phase-shifted phase mask is presented. Two, 3-mm long, standard fibre Bragg gratings (FBGs) were inscribed sequentially in singlemode fibre at the same Bragg wavelength such that the FBGs physically overlapped by one grating period. This induces a spectral-hole in the middle of the reflection spectrum of a standard FBG, equivalent to a π-phase shifted FBG. The flexibility of the technique in writing PSFBGs at any choice of wavelength is demonstrated. The results show that PSFBG devices produced by this method are highly reproducible and the process is fas

THE ECONOMIC IMPACT OF ALTERNATIVE AGRICULTURAL POLICIES ON MINNESOTA'S FARM ECONOMY

Agricultural and Food Policy,