Monitoring tablet surface roughness during the film coating process

The purpose of this study was to evaluate the change of surface roughness and the development of the film during the film coating process using laser profilometer roughness measurements, SEM imaging, and energy dispersive X-ray (EDX) analysis. Surface roughness and texture changes developing during the process of film coating tablets were studied by noncontact laser profilometry and scanning electron microscopy (SEM). An EDX analysis was used to monitor the magnesium stearate and titanium dioxide of the tablets. The tablet cores were film coated with aqueous hydroxypropyl methylcellulose, and the film coating was performed using an instrumented pilot-scale side-vented drum coater. The SEM images of the film-coated tablets showed that within the first 30 minutes, the surface of the tablet cores was completely covered with a thin film. The magnesium signal that was monitored by SEM-EDX disappeared after ∼15 to 30 minutes, indicating that the tablet surface was homogeneously covered with film coating. The surface roughness started to increase from the beginning of the coating process, and the increase in the roughness broke off after 30 minutes of spraying. The results clearly showed that the surface roughness of the tablets increased until the film coating covered the whole surface area of the tablets, corresponding to a coating time period of 15 to 30 minutes (from the beginning of the spraying phase). Thereafter, the film only became thicker. The methods used in this study were applicable in the visualization of the changes caused by the film coating on the tablet surfaces

Local and average gloss from flat-faced sodium chloride tablets

The purpose of this study was to detect local gloss and surface structure changes of sodium chloride tablets. The changes in surface structure were reflected by gloss variation, which was measured using a diffractive optical element-based gloss-meter (DOG). By scanning a surface area, we constructed a 2-dimensional gloss map that characterized the tablet’s surface structure. The gloss variation results were compared with scanning electron microscopy (SEM) images and average surface roughness values that were measured by conventional diamond stylus profilometry. The profilometry data showed a decrease in tablet surface roughness as a function of compression force. In general, a smoother surface contributes to higher average gloss values. The average gloss values for this material, in contrast, showed a decrease as a function of the compression force. The sequence of particle fragmentation and deformation together with crack formation in sodium chloride particles resulted in a loss of gloss for single sodium chloride particles at the tablet surfaces, which could be detected by the DOG. These results were supported by the SEM images. The results show that detailed information regarding tablets’ surface structure changes can be obtained by detection of local gloss variation and average gloss

Prediction of Tablet Film-coating Thickness Using a Rotating Plate Coating System and NIR Spectroscopy

The purpose of this research was to create a calibration model based on near-infrared (NIR) spectroscopy data obtained during a small-scale coating process to predict in-line the coating layer thickness of tablets coated in a side-vented drum coater. The developed setup for the small-scale coating process consisted of a rotating plate with 20 tablets molds that pass a spraying unit, a heating unit, and an in-line NIR spectroscopy probe during one rotation. High-density polyethylene (HDPE) was compressed to flat-faced tablets, and these were coated with a sustained release coating suspension containing Kollicoat IR and Kollicoat SR 30D. The film thickness of these tablets was determined for each tablet individually with a digital micrometer. A calibration model of predicted film thickness versus real-film thickness using PLS regression was developed. This model was tested against in-line NIR data obtained from a coating drum process, in which biconvex HDPE tablets were film-coated with the same film-coating suspension. The model predicted a final coating thickness of 240 μm, while the measured average thickness (n = 100 tablets) was 210 μm. Taking into account the use of a different setup and differently shaped tablets, it was possible to predict the coating thickness with accuracy comparable to the one of the digital micrometer. Thus, the small-scale rotating plate system was found to be an efficient means of preparing calibration model for a tablet-coating drum process