365 research outputs found

    Control-system techniques for improved departure/spin resistance for fighter aircraft

    Get PDF
    Some fundamental information on control system effects on controllability of highly maneuverable aircraft at high angles of attack are summarized as well as techniques for enhancing fighter aircraft departure/spin resistance using control system design. The discussion includes: (1) a brief review of pertinent high angle of attack phenomena including aerodynamics, inertia coupling, and kinematic coupling; (2) effects of conventional stability augmentation systems at high angles of attack; (3) high angle of attack control system concepts designed to enhance departure/spin resistance; and (4) the outlook for applications of these concepts to future fighters, particularly those designs which incorporate relaxed static stability

    Simulator study of stall/post-stall characteristics of a fighter airplane with relaxed longitudinal static stability

    Get PDF
    A real-time piloted simulation was conducted to evaluate the high-angle-of-attack characteristics of a fighter configuration based on wind-tunnel testing of the F-16, with particular emphasis on the effects of various levels of relaxed longitudinal static stability. The aerodynamic data used in the simulation was conducted on the Langley differential maneuvering simulator, and the evaluation involved representative low-speed combat maneuvering. Results of the investigation show that the airplane with the basic control system was resistant to the classical yaw departure; however, it was susceptible to pitch departures induced by inertia coupling during rapid, large-amplitude rolls at low airspeed. The airplane also exhibited a deep-stall trim which could be flown into and from which it was difficult to recover. Control-system modifications were developed which greatly decreased the airplane susceptibility to the inertia-coupling departure and which provided a reliable means for recovering from the deep stall

    SuperCDMS Detector Fabrication Advances

    Get PDF
    For its dark matter search the SuperCDMS collaboration has developed new Ge detectors using the same athermal phonon sensors and ionization measurement technology of CDMS II but with larger mass, superior sensor performance and increased fabrication efficiency. The improvements in fabrication are described, a comparison of CDMS II and SuperCDMS detector production yield is reported, and future scalability addressed

    The Cryogenic Dark Matter Search (CDMS) : Present Status and Future

    Get PDF
    The CDMS collaboration utilizes Ge detectors for their Weakly Interacting Massive Particle (WIMP) search at the Soudan mine, Minnesota. The final data run of CDMS II is complete and a detector upgrade for SuperCDMS has commenced. A SuperTower of five 1‐inch thick Ge crystals has been installed and undergoing commissioning. Its surface‐event rejection capability should allow SuperCDMS to continue to run background free for the next proposed phases: 15 kg Ge deployment at Soudan, and up to 150 kg Ge deployment at SNOLAB. Recent detector advances to allow a 1 tonne Ge experiment are also discussed

    Antenna-coupled TES bolometer arrays for CMB polarimetry

    Get PDF
    We describe the design and performance of polarization selective antenna-coupled TES arrays that will be used in several upcoming Cosmic Microwave Background (CMB) experiments: SPIDER, BICEP-2/SPUD. The fully lithographic polarimeter arrays utilize planar phased-antennas for collimation (F/4 beam) and microstrip filters for band definition (25% bandwidth). These devices demonstrate high optical efficiency, excellent beam shapes, and well-defined spectral bands. The dual-polarization antennas provide well-matched beams and low cross polarization response, both important for high-fidelity polarization measurements. These devices have so far been developed for the 100 GHz and 150 GHz bands, two premier millimeter-wave atmospheric windows for CMB observations. In the near future, the flexible microstrip-coupled architecture can provide photon noise-limited detection for the entire frequency range of the CMBPOL mission. This paper is a summary of the progress we have made since the 2006 SPIE meeting in Orlando, FL

    Antenna-coupled TES bolometer arrays for CMB polarimetry

    Full text link
    We describe the design and performance of polarization selective antenna-coupled TES arrays that will be used in several upcoming Cosmic Microwave Background (CMB) experiments: SPIDER, BICEP-2/SPUD. The fully lithographic polarimeter arrays utilize planar phased-antennas for collimation (F/4 beam) and microstrip filters for band definition (25% bandwidth). These devices demonstrate high optical efficiency, excellent beam shapes, and well-defined spectral bands. The dual-polarization antennas provide well-matched beams and low cross polarization response, both important for high-fidelity polarization measurements. These devices have so far been developed for the 100 GHz and 150 GHz bands, two premier millimeter-wave atmospheric windows for CMB observations. In the near future, the flexible microstrip-coupled architecture can provide photon noise-limited detection for the entire frequency range of the CMBPOL mission. This paper is a summary of the progress we have made since the 2006 SPIE meeting in Orlando, FL

    The Cryogenic Dark Matter Search (CDMS) : Present Status and Future

    Get PDF
    The CDMS collaboration utilizes Ge detectors for their Weakly Interacting Massive Particle (WIMP) search at the Soudan mine, Minnesota. The final data run of CDMS II is complete and a detector upgrade for SuperCDMS has commenced. A SuperTower of five 1‐inch thick Ge crystals has been installed and undergoing commissioning. Its surface‐event rejection capability should allow SuperCDMS to continue to run background free for the next proposed phases: 15 kg Ge deployment at Soudan, and up to 150 kg Ge deployment at SNOLAB. Recent detector advances to allow a 1 tonne Ge experiment are also discussed

    BICEP3: a 95 GHz refracting telescope for degree-scale CMB polarization

    Full text link
    BICEP3 is a 550 mm-aperture refracting telescope for polarimetry of radiation in the cosmic microwave background at 95 GHz. It adopts the methodology of BICEP1, BICEP2 and the Keck Array experiments - it possesses sufficient resolution to search for signatures of the inflation-induced cosmic gravitational-wave background while utilizing a compact design for ease of construction and to facilitate the characterization and mitigation of systematics. However, BICEP3 represents a significant breakthrough in per-receiver sensitivity, with a focal plane area 5×\times larger than a BICEP2/Keck Array receiver and faster optics (f/1.6f/1.6 vs. f/2.4f/2.4). Large-aperture infrared-reflective metal-mesh filters and infrared-absorptive cold alumina filters and lenses were developed and implemented for its optics. The camera consists of 1280 dual-polarization pixels; each is a pair of orthogonal antenna arrays coupled to transition-edge sensor bolometers and read out by multiplexed SQUIDs. Upon deployment at the South Pole during the 2014-15 season, BICEP3 will have survey speed comparable to Keck Array 150 GHz (2013), and will significantly enhance spectral separation of primordial B-mode power from that of possible galactic dust contamination in the BICEP2 observation patch.Comment: 12 pages, 5 figures. Presented at SPIE Astronomical Telescopes and Instrumentation 2014: Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy VII. To be published in Proceedings of SPIE Volume 915

    Scalar Bilepton Dark Matter

    Full text link
    In this work we show that 3-3-1 model with right-handed neutrinos has a natural weakly interacting massive particle (WIMP) dark mater candidate. It is a complex scalar with mass of order of some hundreds of GeV which carries two units of lepton number, a scalar bilepton. This makes it a very peculiar WIMP, very distinct from Supersymmetric or Extra-dimension candidates. Besides, although we have to make some reasonable assumptions concerning the several parameters in the model, no fine tunning is required in order to get the correct dark matter abundance. We also analyze the prospects for WIMP direct detection by considering recent and projected sensitivities for WIMP-nucleon elastic cross section from CDMS and XENON Collaborations.Comment: 21 pages, 8 figures, uses iopart.cls, same text as published version with a small different arrangement of figure
    corecore