The stress-corrosion behavior of Al-Li-Cu alloys: A comparison of test methods

Two powder metallurgy processed (Al-Li-Cu) alloys with and without Mg addition were studied in aqueous 3.5% NaCl solution during the alternate immersion testing of tuning fork specimens, slow crack growth tests using fracture mechanics specimens, and the slow strain rate testing of straining electrode specimens. Scanning electron microscopy and optical metallography were used to demonstrate the character of the interaction between the Al-Li-Cu alloys and the selected environment. Both alloys are susceptible to SC in an aqueous 3.5% NaCl solution under the right electrochemical and microstructural conditions. Each test method yields important information on the character of the SC behavior. Under all conditions investigated, second phase particles strung out in rows along the extrusion direction in the alloys were rapidly attacked, and played principal role in the SC process. With time, larger pits developed from these rows of smaller pits and under certain electrochemical conditions surface cracks initiated from the larger pits and contributed directly to the fracture process. Evidence to support slow crack growth was observed in both the slow strain rate tests and the sustained immersion tests of precracked fracture mechanics specimens. The possible role of H2 in the stress corrosion cracking process is suggested

Stress-corrosion behavior of aluminum-lithium alloys in aqueous environments

The stress corrosion susceptibility of two powder metallurgy (P/M) alloys, Al-Li-Cu and Al-Li-Cu-Mg two mechanically attrited (M/A) alloys, Al-Li-Cu and Al-Li-Mg; and two wrought, ingot alloys, X-2020 and AA7475, are compared. Time-dependent fracture in an aqueous sodium chloride environment under alternate immersion condition was found to vary significantly between alloys. The stress corrosion behavior of the two powder metallurgy processed alloys was studied in detail under conditions of crack initiation, static crack growth, and fatigue crack growth. A variety of stress corrosion tests were performed including smooth surface, time-to-failure tests; potentiostatic tests on smooth surfaces exposed to constant applied strain rates; and fracture mechanics-type tests under static and cyclic loads. Both alloys show surface pitting and subsequent intergranular corrosion. Pitting is more severe in the magnesium-bearing alloy and is associated with stringer particles strung along the extrusion direction as a result of P/M processing

Agenda for Change: views and experiences from estates and facilities staff

Purpose – Agenda for Change is the biggest reform of staff pay in the UK National Health Service NHS) since it began in 1948. As well as introducing a standardised pay structure; it also aims to improve recruitment, retention and staff morale. The aim of this study is to look in-depth at the experiences and opinions of a range of estates and facilities staff surrounding Agenda for Change during the implementation period. Design/methodology/approach – Focus groups were used as the primary method of data collection in an attempt to tap into the views and opinions of staff working at operational positions in a wide range of trusts. Findings – One of the most important and common themes, which reoccurred throughout the focus groups, was the view that the Agenda for Change framework was designed around the needs of nursing staff. Therefore, the framework did not adequately cater for the needs of estates and facilities staff. Specific concerns related to this included; the role or contribution of estates and facilities staff during patient care was not fairly reflected; trade qualifications were not recognised, particularly in comparison to academic qualifications; members of the job matching panels did not have the appropriate knowledge to make decisions surrounding estates and facilities jobs; nurses were more likely to make progress through the bands than estates and facilities staff.</p

Development of Heterogeneous Photosensitized Transition Metal Oxide Water-Splitting Catalysts on Silica Support

The research presented in this manuscript describes the development of photosensitized inexpensive catalysts based on readily available materials. The investigation covers synthesis and characterization of photosensitizers based on porphyrins, mechanical and thermal coating of solid support with semiconducting transition metal oxides, photosensitization of the semiconducting layer, and characterization of the photoelectrochemical properties displayed by the new materials. The process of water oxidation is of primary interest here, with little emphasis put on reduction of protons to gaseous hydrogen. Photoelectrochemically produced protons serve as a probe of effectiveness of the catalysts. Several systems are described, and two catalysts are identified as the most efficient

Modelling two-dimensional Crystals with Defects under Stress: Superelongation of Carbon Nanotubes at high Temperatures

We calculate analytically the phase diagram of a two-dimensional square crystal and its wrapped version with defects under external homogeneous stress as a function of temperature using a simple elastic lattice model that allows for defect formation. The temperature dependence turns out to be very weak. The results are relevant for recent stress experiments on carbon nanotubes. Under increasing stress, we find a crossover regime which we identify with a cracking transition that is almost independent of temperature. Furthermore, we find an almost stress-independent melting point. In addition, we derive an enhanced ductility with relative strains before cracking between 200-400%, in agreement with carbon nanotube experiments. The specific values depend on the Poisson ratio and the angle between the external force and the crystal axes. We give arguments that the results for carbon nanotubes are not much different to the wrapped square crystal.Comment: 12 pages, 6 eps figures, section VI added discussing the modifications of our model when applied to tube

Iron Emission in the z=6.4 Quasar SDSS J114816.64+525150.3

We present near-infrared J and K-band spectra of the z = 6.4 quasar SDSS J114816.64+525150.3 obtained with the NIRSPEC spectrograph at the Keck-II telescope, covering the rest-frame spectral regions surrounding the C IV 1549 and Mg II 2800 emission lines. The iron emission blend at rest wavelength 2900-3000 A is clearly detected and its strength appears nearly indistinguishable from that of typical quasars at lower redshifts. The Fe II / Mg II ratio is also similar to values found for lower-redshift quasars, demonstrating that there is no strong evolution in Fe/alpha broad-line emission ratios even out to z=6.4. In the context of current models for iron enrichment from Type Ia supernovae, this implies that the SN Ia progenitor stars formed at z > 10. We apply the scaling relations of Vestergaard and of McLure & Jarvis to estimate the black hole mass from the widths of the C IV and Mg II emission lines and the ultraviolet continuum luminosity. The derived mass is in the range (2-6)x10^9 solar masses, with an additional uncertainty of a factor of 3 due to the intrinsic scatter in the scaling relations. This result is in agreement with the previous mass estimate of 3x10^9 solar masses by Willott, McLure, & Jarvis, and supports their conclusion that the quasar is radiating close to its Eddington luminosity.Comment: To appear in ApJ Letter

Doubled haploid ramets via embryogenesis of haploid tissue cultures

Tissue culture in the oil palm business is generally concerned with the multiplication (clonal production) of dura, pisifera and tenera palms. These are all normal diploids (2n=2x=36). Sumatra Bioscience has pioneered haploid tissue culture of oil palm (n=x=18). Haploid oil palm is the first step in producing doubled haploid palms which in turn provide parental lines for F1 hybrid production. Chromosome doubling is known to occur during embryogenesis in other haploid cultures, e.g. barley anther culture. Haploid tissue cultures in oil palm were therefore set up to investigate and exploit spontaneous chromosome doubling during embryogenesis. Flow cytometry of embryogenic tissue showed the presence of both haploid (n) and doubled haploid (2n) cells indicating spontaneous doubling. Completely doubled haploid ramets were regenerated suggesting that doubling occurred during the first mitoses of embryogenesis. This is the first report of doubled haploid production in oil palm via haploid tissue culture. The method provides a means of producing a range of doubled haploids in oil palm from the 1,000 plus haploids available at Sumatra Bioscience, in addition the method also produced doubled haploid (and haploid) clones. 1