2,267 research outputs found
Effect of reinforcing submicron SiC particles on the wear of electrolytic NiP coatings Part 1. Uni-directional sliding
As-plated and annealed NiP coatings and composite NiP-SiC coatings were investigated in uni-directional ball-on-disc sliding tests. Abrasive wear was noticed in the case of composite NiP coatings containing submicron SiC particles, whereas in NiP coatings oxidational wear was active. The addition of submicron SiC particles not only increases the hardness of these electrolytic coatings but also hinders the formation of an oxide film in the sliding wear track. As a consequence, the wear loss on as-plated NiP coatings is not markedly reduced by the addition of SiC particles. On the contrary, a heat treatment at 420 °C for 1 h decreases the wear loss on both pure NiP and composite NiP-SiC coatings. During that heat treatment, Ni3P precipitates are formed in the NiP matrix and owing to this fact, the hardness of both pure NiP and composite NiP-SiC coatings increases. However, the heat treatment of composite NiP-SiC coatings induces the sensitivity for crack formation in the NiP matrix around these SiC particles. As a result, the pull out of SiC particles in the wear track occurs easily during sliding, and the wear loss of composite NiP-SiC coatings remains above the wear loss on NiP coatings
Effect of reinforcing submicron SiC particles on the wear of electrolytic NiP coatings Part 2: Bi-directional sliding
As-plated and heat-treated electrodeposited NiP and composite NiP-SiC coatings were investigated in bi-directional ball-on-disc sliding tests. All tests were performed under gross slip conditions. Heat treatment decreases the wear volume loss during fretting in ambient air for all coatings investigated. Heat-treated NiP coating has a lower wear volume loss compared to composite NiP-SiC coatings for all sliding tests. The wear rate at the bi-directional sliding test was found to be lower relative to the wear rate at uni-directional sliding test
Record of thermoluminescence in sea sediments in the last millennia
The profile of thermoluminescence (TL) has been measured in the Ionian shallow-water core GT89-3 with a resolution of 3.096 years (corresponding to a sampling interval of 2 mm) during the last 1800 years. A similar TL record was
previously obtained in the core GT14, taken from the same area, with a resolution of 3.87 years (corresponding to a sampling interval of 2.5 mm). We present here the
comparison of the TL profiles. We confirm the presence of the centennial and the decennial cycles earlier identified in the TL signal, corresponding to cyclicities appearing to exist in the solar-activity records. We discuss the origin of the TL signal by comparison with the cosmogenic isotopes 14C and 10Be records
NiP/SiC composite coatings: the effects of particles on the electrochemical behaviour
NiP/SiC (17 at.% P) composite coatings were prepared by electrodeposition from a Brenner type plating bath containing SiC particles. Cyclic voltammetry and immersion time were used to evaluate the electrochemical behaviour of these coatings. The results showed that the presence of SiC particles in NiP alloy increased corrosion properties, because the exposed area of the metallic matrix was reduced due to its recovering by SiC particles. However, the current densities developed by the NiP/SiC composite coatings increased with increasing amount of incorporated particles, and such effect is more remarkable for small particles, after heat treatment and when the systems are polarized
On the solar origin of the 200 y Suess wiggles: Evidence from thermoluminescence in sea sediments
In order to understand the origin of the Suess wiggles, present in the tree ring 14C record, we have studied the thermoluminescence (TL) of a shallow-water Ionian sea core, in an attempt to provide a record of an indicator
responding to the solar output more promptly than 14C in tree rings. The spectral content of the TL and radiocarbon records is very similar; neverthless, in addition to the 207 y Suess wave (A43.6% ), the TL record shows the second harmonic (103.5 y; A42.4% ), in phase with the envelope of the 11 y solar cycles. This result, obtained by different spectral methods, in particular by Superposition of Epochs (SE) and by Singular Spectrum Analysis (SSA), strongly supports the solar origin of the 200 y Suess wiggles
SAT based Enforcement of Domotic Effects in Smart Environments
The emergence of economically viable and efficient sensor technology provided impetus to the development of smart devices (or appliances). Modern smart environments are equipped with a multitude of smart devices and sensors, aimed at delivering intelligent services to the users of smart environments. The presence of these diverse smart devices has raised a major problem of managing environments. A rising solution to the problem is the modeling of user goals and intentions, and then interacting with the environments using user defined goals. `Domotic Effects' is a user goal modeling framework, which provides Ambient Intelligence (AmI) designers and integrators with an abstract layer that enables the definition of generic goals in a smart environment, in a declarative way, which can be used to design and develop intelligent applications. The high-level nature of domotic effects also allows the residents to program their personal space as they see fit: they can define different achievement criteria for a particular generic goal, e.g., by defining a combination of devices having some particular states, by using domain-specific custom operators. This paper describes an approach for the automatic enforcement of domotic effects in case of the Boolean application domain, suitable for intelligent monitoring and control in domotic environments. Effect enforcement is the ability to determine device configurations that can achieve a set of generic goals (domotic effects). The paper also presents an architecture to implement the enforcement of Boolean domotic effects, and results obtained from carried out experiments prove the feasibility of the proposed approach and highlight the responsiveness of the implemented effect enforcement architectur
About orientation dependence of physico-chemical properties of HPHT diamond surfaces thermally treated in H2 and D2 environments
Recently [1] we reported on some preliminary results on different physico-chemical properties of diamond (100), (110) and (111) surfaces hydrogenated by using molecular hydrogen only. The main conclusions were that thermal hydrogenation was as efficient as plasma one and that the creation of the conducting surface channel was activated by a larger energy on the (100) surface with respect to the other two. The reason, at least in the case of the comparison between (100) and (111) surfaces, could be either attributed to the presence of a carbon – oxygen double bond before hydrogenation in the former case [2] or to a better coverage by carbon – hydrogen bonds in the latter one. In the present work, further results on surface conductivity after hydrogenation steps carried out at different temperatures are described and discussed, in order to discriminate between purely thermal and kinetic effects. Moreover, other results are reported on diamond powders (0.25 micrometer mean size) in order to draw some qualitative and quantitative conclusions about hydrogen presence and behavior at the diamond surfaces. In order to better clarify the results, a large part of chemical measurements were performed after deuteration steps carried out using the same conditions as thermal hydrogenation
Mixed-Integer Linear Programming Approach for Life-Cycle Carpet Profit
This paper proposes an mixed-integer linear programming (MILP) model to accurately represent a product life-cycle design considering profit maximization. The model that takes into account the effects on the demand lev-el and a measure of the customer utility considering recycled raw materials and prices of the traditional and modular products. Demand functions for traditional and modular products are considered. Given the presence of bilinear terms in the formulation (for example due to the multiplication of product price for the demand), the multi-parametric disaggregation technique is used to obtain a line-ar model. The developed model is applied to a company that produces tradition-al carpets and it wants to manufacture carpets based on a new modular design where recycled materials must be incorporated. The objective of the company is to maximize the total profit taking into account the design specifications and the selling prices for traditional and modular carpets. In addition, the amount of square meters of traditional carpets must be determined and the take-back rate must be considered. The practical behavior of the formulation is analyzed through computational experiments exploring the analyzed case-study.Sociedad Argentina de Informática e Investigación Operativ
- …