150 research outputs found
NIMOC: A design and analysis tool for supersonic nozzles under non-ideal compressible flow conditions
Experimental Observation of Non-Ideal Nozzle Flow of Siloxane Vapor MDM
The first experimental results from the Test-Rig for Organic Vapors (TROVA) at Politecnico di Milano are reported. The facility implements an Organic Rankine Cycle (ORC) where the expansion process takes place within a straight axis convergent-divergent nozzle, which is the simplest geometry representative of an ORC turbine blade passage. In order to reduce the required input thermal power, a batch operating mode was selected for the plant. Experimental runs with air allowed to verify the throttling valve operation and the measurement techniques, which include total pressure and temperature measurements in the settling chamber, static pressure measurements along the nozzle axis. A double-passage Schlieren technique is used to visualize the flow field in the nozzle throat and divergent section and to determine the position of shock waves within the flow field. The first experimental observation of non-ideal nozzle flows are presented for the expansion of siloxane fluid MDM (C8H24O2Si3, octamethyltrisiloxane) for vapor expansion in the close proximity of the liquid-vapor saturation curve, at relatively low pressure of operation. A supersonic flow is attained within the divergent section of the nozzle, as demonstrated by the observation of an oblique shock wave at the throat section, where a 0.1 mm recessed step is located. Schlieren visualizations are limited by the occurrence of condensation along the mirror side of the nozzle. Pressure measurements are compatible with the observed flow field
Experimental observation of non-ideal expanding flows of Siloxane MDM vapor for ORC applications
Abstract Extensive experimental results characterizing the supersonic expansion of an organic vapor in non-ideal conditions are reported in this paper for the first time. The collected data also allowed the assessment of the accuracy of Computational Fluid Dynamic (CFD) tools employed to predict the non-ideal behavior of such flows, including the consistency of thermodynamic models adopted. The investigation has been carried out on the converging-diverging nozzle test section of the Test Rig for Organic VApors (TROVA), at the Laboratory of Compressible fluid-dynamics for Renewable Energy Application (CREA) of Politecnico di Milano. Supersonic nozzle flow was chosen as the simplest one of significance for organic Rankine cycle (ORC) turbine channels. The working fluid under scrutiny is Siloxane MDM, a widely employed compound for high temperature ORCs. MDM vapor expands through the TROVA nozzle at moderate non-ideal conditions in the close proximity of the vapor saturation curve. This is the region where ORC expanders typically operate, thus proving the relevance of the investigation for the ORC community. Indeed, detailed experimental data representative of typical ORC expansions were lacking in the open literature up to date. Two different nozzle geometries, featuring exit Mach number of 2.0 and 1.5 respectively, were tested, exploring a wide range of thermodynamic inlet conditions and diverse levels of non-ideality, from moderate non-ideal state, indicated by a compressibility factor Z = Pv/RT ≃ 0.80, to dilute gas conditions, Z ≥ 0.97. Maximum operating total pressure and temperature are Pt ≃ 5 bar and T T ≃ 250 °C. The nozzle flow is characterized in terms of total pressure, total temperature, static pressure at discrete locations along the nozzle axis, and schlieren imaging. In contrast to the well known case of polytropic ideal gas, the vapor expansion through the nozzle is found to be dependent on the inlet conditions, thus proving the non-ideal character of the flow. This influence is found to be consistent with the one predicted by the quasi-1D theory coupled with simple non-ideal gas models. Experimental data at the nozzle centerline are compared with those resulting from a two-dimensional viscous CFD calculation carried out using the SU2 software suite and the improved Peng Robinson Stryjek Vera (iPRSV) thermodynamic model. A very good accordance is found, demonstrating the high accuracy of the applied tools
Four-year clinical outcome following randomised use of zotarolimus-eluting stents versus everolimus-eluting stents in all-comers: Insights from the DUTCH PEERS trial
Background: The DUTCH PEERS (TWENTE II) trial (clinicaltrials.gov NCT01331707) is a randomised, multicenter, single-blinded, investigator initiated all-comers trial. All coronary syndromes were permitted with no limit for lesion length, reference size, or number of lesions or diseased vessels to be treated. In total, 1811 patients were 1:1 randomised to cobalt chromium-based zotarolimuseluting stents (ZES) versus platinum chromium-based everolimus-eluting stents (EES). These durable polymer-based drug-eluting stents (DES) were developed to facilitate device deliverability and to improve stent apposition to the vessel wall. Purpose: We assessed the 4-year clinical outcome of the DUTCH PEERS trial in terms of safety and efficacy. Methods: Clinical outcome was assessed by means of follow-up data of the trial participants. The primary endpoint target vessel failure (TVF) is a composite of cardiac death, target vessel-related myocardial infarction (MI) or target vessel revascularization. Secondary endpoints included the individual components of the TVF and the incidence of definite-or-probable stent thrombosis. Endpoints were analyzed by the logrank test by comparing the time to the endpoint, using the Kaplan-Meier method. Independent contract research organizations performed the study monitoring and clinical event adjudication. Results: The 4-year clinical follow-up data were available in 1802 patients (99.5%; 4 patients were lost to follow-up and 5 withdrew consent). The ZES and EES groups showed favourable outcomes with a similar incidence of TVF (12.1% vs. 12.1%; Logrank p=0.95). The rates of the individual components of TVF were also similar for both stent arms: cardiac death (3.9% vs. 3.7%; Logrank p=0.78); target vessel-related MI (3.2% vs. 2.5%; Logrank p=0.38); and target vessel revascularization (6.8% vs. 7.5%; Logrank p=0.55), respectively. In addition, the incidence of definite-or-probable stent thrombosis was similar for patients treated with ZES versus EES (1.5% vs. 1.2%; Logrank p=0.67). Conclusion: At 4-year follow-up, ZES and EES showed similar and sustained results in terms of safety and efficacy for treating all-comer patients
Computational tool to support decision-making in the management of energy sources used in agrifood industries
Numa sociedade cada vez mais competitiva e com um ambiente económico desfavorável, é necessário que as Pequenas e Médias Empresas (PME) se atualizem, aumentando assim a sua eficiência. As empresas utilizam cada vez mais ferramentas computacionais para apoiar o desenvolvimento de cenários preditivos para facilitar a tomada de decisões. No entanto, as ferramentas desenvolvidas para as PME nem sempre são expeditas e simples de usar. A ferramenta apresentada neste artigo pretende apoiar a gestão das fontes de energia utilizadas pelas empresas agroindustriais. A ferramenta tem como objetivo facilitar e promover a implementação de uma nova cultura de gestão empresarial neste setor tão importante a nível nacional. A ferramenta computacional é direcionada para apoiar a tomada de decisões sobre a seleção de fontes de energia fósseis ou renováveis a serem utilizadas numa agroindústria em particular, apresentando os valores médios do consumo de energia, o seu custo e as emissões de dióxido de carbono associadas a cada fonte de energia selecionada.In an increasingly competitive society with an unfavorable economic environment, it is necessary for Small and Medium
Enterprises (SMEs) to update themselves, thereby increasing their efficiency. Companies increasingly use computational
tools to support the development of predictive scenarios in order to facilitate decision making. However, the tools developed
for SMEs are not always expedite and simple to use. The tool presented in this article intends to support the management of
energy sources used by agro-industrial companies. It aims to facilitate and promote the implementation of a new culture of
business management, in this sector so important at national level The computational is directed to support the decisionmaking
on the selection of fossil or renewable energy sources to be used in a particular agroindustry, by presenting the
average values of the energy consumption, cost and emissions associated with each selected energy source.info:eu-repo/semantics/publishedVersio
Diabetic patients treated with novel thin composite-wire strut zotarolimus-eluting stents versus ultrathin strut sirolimus-eluting stents in the BIONYX trial: 2-year results of a prespecified analysis
Comparison of two iterations of the zotarolimus-eluting stents: an analysis of all-comer patients from two consecutive randomised clinical trials
Oval Domes: History, Geometry and Mechanics
An oval dome may be defined as a dome whose plan or profile (or both) has an oval form. The word Aoval@ comes from the latin Aovum@, egg. Then, an oval dome has an egg-shaped geometry. The first buildings with oval plans were built without a predetermined form, just trying to close an space in the most economical form. Eventually, the geometry was defined by using arcs of circle with common tangents in the points of change of curvature. Later the oval acquired a more regular form with two axis of symmetry. Therefore, an “oval” may be defined as an egg-shaped form, doubly symmetric, constructed with arcs of circle; an oval needs a minimum of four centres, but it is possible also to build polycentric ovals.
The above definition corresponds with the origin and the use of oval forms in building and may be applied without problem until, say, the XVIIIth century. Since then, the teaching of conics in the elementary courses of geometry made the cultivated people to define the oval as an approximation to the ellipse, an “imperfect ellipse”: an oval was, then, a curve formed with arcs of circles which tries to approximate to the ellipse of the same axes. As we shall see, the ellipse has very rarely been used in building.
Finally, in modern geometrical textbooks an oval is defined as a smooth closed convex curve, a more general definition which embraces the two previous, but which is of no particular use in the study of the employment of oval forms in building.
The present paper contains the following parts: 1) an outline the origin and application of the oval in historical architecture; 2) a discussion of the spatial geometry of oval domes, i. e., the different methods employed to trace them; 3) a brief exposition of the mechanics of oval arches and domes; and 4) a final discussion of the role of Geometry in oval arch and dome design
Three-year clinical outcome of patients with abnormal glucose metabolism treated with contemporary drug-eluting stents
- …