329 research outputs found
Ballistic Spin Injection from Fe into ZnSe and GaAs with a (001), (111), and (110) orientation
We present first-principles calculations of ballistic spin injection in
Fe/GaAs and Fe/ZnSe junctions with orientation (001), (111), and (110). We find
that the symmetry mismatch of the Fe minority-spin states with the
semiconductor conduction states can lead to extremely high spin polarization of
the current through the (001) interface for hot and thermal injection
processes. Such a symmetry mismatch does not exist for the (111) and (110)
interfaces, where smaller spin injection efficiencies are found. The presence
of interface states is found to lower the current spin polarization, both with
and without a Schottky barrier. Finally, a higher bias can also affect the spin
injection efficiency.Comment: 12 pages, 18 figure
Cost-effectiveness of CTA, MRA and DSA in patients with non-traumatic subarachnoid haemorrhage
OBJECTIVES: Intra-arterial digital subtraction angiography (DSA), magnetic resonance angiography (MRA) and computed tomographic angiography (CTA) are imaging modalities used for diagnostic work-up of non-traumatic subarachnoid haemorrhage. The aim of our study was to compare the cost-effectiveness of MRA, DSA and CTA in the first year after the bleed. METHODS: A decision model was used to calculate costs and benefits (in quality-adjusted life-years [QALYs]) that accrued to cohorts of 1,000 patients. Costs and characteristics of diagnostic tests, therapy, patients’ quality of life and associated costs were respected. The diagnostic strategy with highest QALYs and lowest costs was considered most cost-effective. RESULTS: DSA was the most effective diagnostic option, yielding on average 0.6039 QALYs (95 % CI, 0.5761–0.6327) per patient, followed by CTA 0.5983 QALYs (95 % CI, 0.5704–0.6278) and MRA 0.5947 QALYs (95 % CI, 0.5674–0.6237). Cost was lowest for DSA (39,808 €; 95 % CI, 37,182–42,663), followed by CTA (40,748 €; 95 % CI, 37,937–43,831) and MRA (41,814 €; 95 % CI, 38,730–45,146). A strategy of CTA followed by DSA if CTA was negative or coiling deemed not feasible, was as effective as DSA alone at average costs of 39,767€ (95 % CI, 36,903–42,402). CONCLUSION: A combined strategy of CTA and DSA was found to be the most cost-effective diagnostic approach. MAIN MESSAGES: • We defined a standard model for cost-effectiveness analysis in diagnostic imaging. • Comparing total 1-year health costs and benefits, CTA is superior to MRA. • A strategy of combining CTA and DSA was found to be the most cost-effective diagnostic approach
Dynamics of myelin content decrease in the rat stroke model
A majority of studies were usually focused on neuronal death after brain ischemia, however, stroke affects all cell types including oligodendrocytes that form myelin sheath in the CNS. Our study is focused on the changes of myelin content in ischemic core and neighbor structures in early terms (1, 3 and 10 days) after stroke. Stroke modeled with middle cerebral artery occlusion (MCAo) in 15 male rats that were divided in three groups by time-points after operation. Brain sections were histologically stained with Luxol Fast Blue (LFB) for myelin quantification. The significant demyelination was found in the ischemic core, corpus callosum, anterior commissure, whereas myelin content was increased in caudoputamen, internal capsule and piriform cortex compared with the contralateral hemisphere. The motor cortex showed a significant increase of myelin content on the 1st day and a significant decrease on the 3rd and 10th days after MCAo. These results suggest stroke influences myelination not only in ischemic core but also in distant structures
Ab-initio calculation of Kerr spectra for semi-infinite systems including multiple reflections and optical interferences
Based on Luttinger's formulation the complex optical conductivity tensor is
calculated within the framework of the spin-polarized relativistic screened
Korringa-Kohn-Rostoker method for layered systems by means of a contour
integration technique. For polar geometry and normal incidence ab-initio Kerr
spectra of multilayer systems are then obtained by including via a 2x2 matrix
technique all multiple reflections between layers and optical interferences in
the layers. Applications to Co|Pt5 and Pt3|Co|Pt5 on the top of a semi-infinite
fcc-Pt(111) bulk substrate show good qualitative agreement with the
experimental spectra, but differ from those obtained by applying the commonly
used two-media approach.Comment: 32 pages (LaTeX), 5 figures (Encapsulated PostScript), submitted to
Phys. Rev.
Geometrical models for cardiac MRI in rodents: comparison of quantification of left ventricular volumes and function by various geometrical models with a full-volume MRI data set in rodents.
van de Weijer T, van Ewijk PA, Zandbergen HR, Slenter JM, Kessels AG, Wildberger JE, Hesselink MK, Schrauwen P, Schrauwen-Hinderling VB, Kooi ME. Geometrical models for cardiac MRI in rodents: comparison of quantification of left ventricular volumes and function by various geometrical models with a full-volume MRI data set in rodents. Am J Physiol Heart Circ Physiol 302: H709-H715, 2012. First published November 18, 2011; doi:10.1152/ajpheart.00710.2011.-MRI has been proven to be an accurate method for noninvasive assessment of cardiac function. One of the current limitations of cardiac MRI is that it is time consuming. Therefore, various geometrical models are used, which can reduce scan and postprocessing time. It is unclear how appropriate their use is in rodents. Left ventricular (LV) volumes and ejection fraction (EF) were quantified based on 7.0 Tesla cine-MRI in 12 wild-type (WT) mice, 12 adipose triglyceride lipase knockout (ATGL(-/-)) mice (model of impaired cardiac function), and 11 rats in which we induced cardiac ischemia. The LV volumes and function were either assessed with parallel short-axis slices covering the full volume of the left ventricle (FV, gold standard) or with various geometrical models [modified Simpson rule (SR), biplane ellipsoid (BP), hemisphere cylinder (HC), single-plane ellipsoid (SP), and modified Teichholz Formula (TF)]. Reproducibility of the different models was tested and results were correlated with the gold standard (FV). All models and the FV data set provided reproducible results for the LV volumes and EF, with interclass correlation coefficients >= 0.87. All models significantly over-or underestimated EF, except for SR. Good correlation was found for all volumes and EF for the SR model compared with the FV data set (R-2 ranged between 0.59-0.95 for all parameters). The HC model and BP model also predicted EF well (R-2 >= 0.85), although proved to be less useful for quantitative analysis. The SP and TF models correlated poorly with the FV data set (R-2 >= 0.45 for EF and R-2 >= 0.29 for EF, respectively). For the reduction in acquisition and postprocessing time, only the SR model proved to be a valuable method for calculating LV volumes, stroke volume, and EF
Создание опытного образца геохода. Временной фактор изготовления компонентов и их сборки в конечное изделие
Изложен опыт реализации проекта №02.G25.31.0076 в рамках открытого конкурса Министерства образования и науки РФ и Постановления Правительства РФ №218 от 09.04.2010 г. Дано описание временных рамок реализации проекта, в частности, работы над созданием опытного образца щитового проходческого агрегата - геохода, диаметром 3,2 м. В настоящее время проект находится в стадии завершения. Главная идея статьи - поделиться опытом создания новой техники и показать, сколько времени затрачивается на решение тех или иных производственных процессов по созданию опытных образцов горных машин на примере геохода. Данная статья будет полезна организациям, планирующим участие в реализации проектов по созданию высокотехнологичного производства, и может являться ориентиром для составления Плана-графика реализации подобных проектов. Автор статьи лично принимал участие в реализации данного проекта и принимал решения по планированию и организации работ.The experience of the project №02.G25.31.0076 is presented. The project was operated in the framework of the open competition of the Ministry of education and science of the Russian Federation and the RF Government Decree №218 from 09.04.2010. Description of the time frame of the project implementation, particularly the activities of the TBM prototype creation - geokhod, with a diameter of 3.2 m. is presented. Currently, the project is closer to complete. The main idea of the article is to share the experience of creating new technology and show how much time is spent on the decision of production processes to create prototypes of mining machines on the example of a geokhod. This article will be useful for organizations planning to participate in the implementation of projects to create high-tech production, and can be a guide for drawing up a Plan-schedule of such projects. The author of this article personally participated in the implementation of this project and made decisions on planning and organization of activities
Origin and Properties of the Gap in the Half-Ferromagnetic Heusler Alloys
We study the origin of the gap and the role of chemical composition in the
half-ferromagnetic Heusler alloys using the full-potential screened KKR method.
In the paramagnetic phase the C1_b compounds, like NiMnSb, present a gap.
Systems with 18 valence electrons, Z_t, per unit cell, like CoTiSb, are
semiconductors, but when Z_t > 18 antibonding states are also populated, thus
the paramagnetic phase becomes unstable and the half-ferromagnetic one is
stabilized. The minority occupied bands accommodate a total of nine electrons
and the total magnetic moment per unit cell in mu_B is just the difference
between Z_t and . While the substitution of the transition metal
atoms may preserve the half-ferromagnetic character, substituting the atom
results in a practically rigid shift of the bands and the loss of
half-metallicity. Finally we show that expanding or contracting the lattice
parameter by 2% preserves the minority-spin gap.Comment: 11 pages, 7 figures New figures, revised tex
Exercise-induced modulation of cardiac lipid content in healthy lean young men
Cardiac lipid accumulation is associated with decreased cardiac function and energy status (PCr/ATP). It has been suggested that elevated plasma fatty acid (FA) concentrations are responsible for the cardiac lipid accumulation. Therefore, the aim of the present study was to investigate if elevating plasma FA concentrations by exercise results in an increased cardiac lipid content, and if this influences cardiac function and energy status. Eleven male subjects (age 25.4 ± 1.1 years, BMI 23.6 ± 0.8 kg/m2) performed a 2-h cycling protocol, once while staying fasted and once while ingesting glucose, to create a state of high versus low plasma FA concentrations, respectively. Cardiac lipid content was measured by proton magnetic resonance spectroscopy (1H-MRS) at baseline, directly after exercise and again 4 h post-exercise, together with systolic function (by multi-slice cine-MRI) and cardiac energy status (by 31P-MRS). Plasma FA concentrations were increased threefold during exercise and ninefold during recovery in the fasted state compared with the glucose-fed state (p < 0.01). Cardiac lipid content was elevated at the end of the fasted test day (from 0.26 ± 0.04 to 0.44 ± 0.04%, p = 0.003), while it did not change with glucose supplementation (from 0.32 ± 0.03 to 0.26 ± 0.05%, p = 0.272). Furthermore, PCr/ATP was decreased by 32% in the high plasma FA state compared with the low FA state (n = 6, p = 0.014). However, in the high FA state, the ejection fraction 4 h post-exercise was higher compared with the low FA state (63 ± 2 vs. 59 ± 2%, p = 0.018). Elevated plasma FA concentrations, induced by exercise in the fasted state, lead to increased cardiac lipid content, but do not acutely hamper systolic function. Although the lower cardiac energy status is in line with a lipotoxic action of cardiac lipid content, a causal relationship cannot be proven
Fully relativistic calculation of magnetic properties of Fe, Co and Ni adclusters on Ag(100)
We present first principles calculations of the magnetic moments and magnetic
anisotropy energies of small Fe, Co and Ni clusters on top of a Ag(100) surface
as well as the exchange-coupling energy between two single adatoms of Fe or Co
on Ag(100). The calculations are performed fully relativistically using the
embedding technique within the Korringa-Kohn-Rostoker method. The magnetic
anisotropy and the exchange-coupling energies are calculated by means of the
force theorem. In the case of adatoms and dimers of iron and cobalt we obtain
enhanced spin moments and, especially, unusually large orbital moments, while
for nickel our calculations predict a complete absence of magnetism. For larger
clusters, the magnitudes of the local moments of the atoms in the center of the
cluster are very close to those calculated for the corresponding monolayers.
Similar to the orbital moments, the contributions of the individual atoms to
the magnetic anisotropy energy strongly depend on the position, hence, on the
local environment of a particular atom within a given cluster. We find strong
ferromagnetic coupling between two neighboring Fe or Co atoms and a rapid,
oscillatory decay of the exchange-coupling energy with increasing distance
between these two adatoms.Comment: 8 pages, ReVTeX + 4 figures (Encapsulated Postscript), submitted to
PR
- …