696 research outputs found
Quantifying the intrinsic amount of fabrication disorder in photonic-crystal waveguides from optical far-field intensity measurements
Residual disorder due to fabrication imperfections has important impact in
nanophotonics where it may degrade device performance by increasing radiation
loss or spontaneously trap light by Anderson localization. We propose and
demonstrate experimentally a method of quantifying the intrinsic amount of
disorder in state-of-the-art photonic-crystal waveguides from far-field
measurements of the Anderson-localized modes. This is achieved by comparing the
spectral range that Anderson localization is observed to numerical simulations
and the method offers sensitivity down to ~ 1 nm
Efficient out-coupling of high-purity single photons from a coherent quantum dot in a photonic-crystal cavity
We demonstrate a single-photon collection efficiency of from
a quantum dot in a low-Q mode of a photonic-crystal cavity with a single-photon
purity of recorded above the saturation power. The high
efficiency is directly confirmed by detecting up to kilocounts per
second on a single-photon detector on another quantum dot coupled to the cavity
mode. The high collection efficiency is found to be broadband, as is explained
by detailed numerical simulations. Cavity-enhanced efficient excitation of
quantum dots is obtained through phonon-mediated excitation and under these
conditions, single-photon indistinguishability measurements reveal long
coherence times reaching ns in a weak-excitation regime. Our work
demonstrates that photonic crystals provide a very promising platform for
highly integrated generation of coherent single photons including the efficient
out-coupling of the photons from the photonic chip.Comment: 13 pages, 8 figures, submitte
Climate Change and Corporate Cash Holdings: Global Evidence
Using data from 41 different countries including the United States, we find that firms increase their cash holdings when exposed to long-term adverse climate change. Our subsample analyses suggest that the increase in cash holdings is more pronounced for the firms with a cash shortfall, and for the firms that are financially constrained. Overall, our findings fit consistently within the precautionary motive framework for holding cash
A hierarchical key pre-distribution scheme for fog networks
Security in fog computing is multi-faceted, and one particular challenge is establishing a secure communication channel between fog nodes and end devices. This emphasizes the importance of designing efficient and secret key distribution scheme to facilitate fog nodes and end devices to establish secure communication channels. Existing secure key distribution schemes designed for hierarchical networks may be deployable in fog computing, but they incur high computational and communication overheads and thus consume significant memory. In this paper, we propose a novel hierarchical key pre-distribution scheme based on “Residual Design” for fog networks. The proposed key distribution scheme is designed to minimize storage overhead and memory consumption, while increasing network scalability. The scheme is also designed to be secure against node capture attacks. We demonstrate that in an equal-size network, our scheme achieves around 84% improvement in terms of node storage overhead, and around 96% improvement in terms of network scalability. Our research paves the way for building an efficient key management framework for secure communication within the hierarchical network of fog nodes and end devices.
KEYWORDS: Fog Computing, Key distribution, Hierarchical Networks
Limitation in the performance of fine powder separation in a turbo air classifier
The deflector wheel classifier is a widely used device for the separation of fine powders in different industrial applications. The primary objective of the separation process is to achieve high-quality separation of fine powders characterized by a narrow particle size distribution and high separation sharpness. Theoretically, the reduction in the cut size is accomplished by decreasing the gas flow rate or increasing the rotational speed of the classifier, which amplifies the centrifugal forces compared to the drag forces exerted on the particles. This behavior is, indeed, observed in many cases, but it cannot be extrapolated arbitrarily. At their performance limit, classifiers may, against expectation, show an increase in cut size and, in addition, a reduction in the sharpness of the separation process. The limitation in the reduction in the cut size and in the improvement in the separation sharpness arises due to an imbalance between the operating rotational speed and flow rate, which results in a non-uniform flow field in the classifier. If the balance conditions are fulfilled, an optimum separation with a high separation sharpness can be achieved. In this work, CFD simulations validated by some experimental results are employed to represent this limitation, which is obtained by varying the operating parameters using different material densities with particles ranging from one to ten microns
Near-unity coupling efficiency of a quantum emitter to a photonic-crystal waveguide
A quantum emitter efficiently coupled to a nanophotonic waveguide constitutes
a promising system for the realization of single-photon transistors,
quantum-logic gates based on giant single-photon nonlinearities, and high
bit-rate deterministic single-photon sources. The key figure of merit for such
devices is the -factor, which is the probability for an emitted single
photon to be channeled into a desired waveguide mode. We report on the
experimental achievement of for a quantum dot
coupled to a photonic-crystal waveguide, corresponding to a single-emitter
cooperativity of . This constitutes a nearly ideal
photon-matter interface where the quantum dot acts effectively as a 1D
"artificial" atom, since it interacts almost exclusively with just a single
propagating optical mode. The -factor is found to be remarkably robust
to variations in position and emission wavelength of the quantum dots. Our work
demonstrates the extraordinary potential of photonic-crystal waveguides for
highly efficient single-photon generation and on-chip photon-photon
interaction
Complete improvement in a patient with multiple irreversible defects of the left ventricle on 99m technetium-sestamibi SPECT after percutaneous coronary intervention.
99mTc-sestamibi has been investigated as a potential viability marker; initial studies have shown good concordance between 201Tl and 99mTc-sestamibi activities in both viable and nonviable myocardium. However, assessment of myocardial viability by 99mTc-sestamibi remains controversial for tissue recovery after revascularization. Here, we present a patient with several regions of severely diminished and irreversible (defect persisting in both early and delay images of each set scanning) defects on initial scan which were dissolved completely on the follow up scan after an intervention. In a 75 year-old Asian woman with acute myocardial infarction who received thrombolytic therapy and subjected to percutaneous coronary angiography (PCI) on day 28 after acute myocardial infarction(MI), resting 99mTc-sestamibi SPECT was applied on day 4 (initial scan) and 138 (follow up scan) after acute MI at 30 and 180 min after injection of tracer (740 MBq); Two-dimensional echocardiography was carried out at the same time. On the initial image set, there was irreversible defects in the apex, anteroapical, inferoapical, anteroseptal, septal and also anterior walls, while the follow up image was normal in all regions.The angiography intervention showed just significant stenosis on left anterior descending (LAD) vessel (95). This may highlight the failure of 99mTc-sestamibi as a marker of myocardial viability and also mandate further validating of the procedure with follow up scan or other modalities for myocardial viability investigation
Sister chromatid exchange in peripheral blood lymphocytes as a possible breast cancer risk biomarker: A study of Iranian patients with breast cancer
Introduction: Sister chromatid exchanges (SCEs) can be induced by variousgenotoxic treatments, suggesting that SCEs refl ect a DNA repair process and it may be a good index for assessment of genomic instability. However, the occurrence of genetic instability and in particular, of spontaneous SCEs has been strongly linked to cancer. Several chromosomal regions and many genes have been implicated in breast cancer.Materials and Methods: Blood samples were obtained from 31 Iranian breast cancer patients and 11 healthy women. SCE was measured in peripheral blood lymphocytes by adding to Ham’sF10 medium in presence of PHA, BrdU (5-bromo-deoxy Uridine) fl uorochrome Hoechst 33258, exposure to UV light and Giemsa staining. Then, SCE frequencies of patient and control groups were compared by the Mann-Withney U-test.Results: Signifi cantly difference was observed between two groups (
Single-photon nonlinear optics with a quantum dot in a waveguide
Strong nonlinear interactions between photons enable logic operations for
both classical and quantum-information technology. Unfortunately, nonlinear
interactions are usually feeble and therefore all-optical logic gates tend to
be inefficient. A quantum emitter deterministically coupled to a propagating
mode fundamentally changes the situation, since each photon inevitably
interacts with the emitter, and highly correlated many-photon states may be
created . Here we show that a single quantum dot in a photonic-crystal
waveguide can be utilized as a giant nonlinearity sensitive at the
single-photon level. The nonlinear response is revealed from the intensity and
quantum statistics of the scattered photons, and contains contributions from an
entangled photon-photon bound state. The quantum nonlinearity will find
immediate applications for deterministic Bell-state measurements and
single-photon transistors and paves the way to scalable waveguide-based
photonic quantum-computing architectures
Enabling same-day delivery using a drone resupply model with transshipment points
We study a hybrid logistics delivery model which incorporates trucks and drones. In this model, named the Drone Resupply Model with Transshipment Points (DRMTP), drones are used to resupply transshipment points where trucks visit to pick up packages for delivery to customers. A simulation model is developed to simulate the delivery operations. The model is evaluated in two case studies in an urban area and a suburban area in Massachusetts, USA. Using this resupply model, the average delivery time is reduced compared to the conventional truck-only delivery model. The experimental results in the suburban region show that the DRMTP model with one transshipment point achieves 36% lower delivery time compared to the truck-only model. In the urban region, the model with four transshipment points obtains 66% delivery time reduction compared to the truck-only model. The results indicate that the proposed model can be used to enhance the efficiency of the last-mile delivery operations.publishedVersio
- …