206 research outputs found

    Mathematical model for lift/cruise fan V/STOL aircraft simulator programming data

    Get PDF
    Simulation data are reported for the purpose of programming the flight simulator for advanced aircraft for tests of the lift/cruise fan V/STOL Research Technology Aircraft. These simulation tests are to provide insight into problem areas which are encountered in operational use of the aircraft. A mathematical model is defined in sufficient detail to represent all the necessary pertinent aircraft and system characteristics. The model includes the capability to simulate two basic versions of an aircraft propulsion system: (1) the gas coupled configuration which uses insulated air ducts to transmit power between gas generators and fans in the form of high energy engine exhaust and (2) the mechanically coupled power system which uses shafts, clutches, and gearboxes for power transmittal. Both configurations are modeled such that the simulation can include vertical as well as rolling takeoff and landing, hover, powered lift flight, aerodynamic flight, and the transition between powered lift and aerodynamic flight

    Analyses of the reasons for the decreased service time of CrN-coated die for aluminy hot extrusion – a case study

    Get PDF
    Presented study shows that considerable reserves still exist for increasing the service times (lifetimes) of CrN – coated dies for Al hot extrusion. The main reasons for the decreased service times are revealed and explained regarding the selected CrN - coated die for hot extrusion, i.e. why the service time of the coated-die is not in accordance with the wear resistance of the CrN - coating. The shaping of the bearing surface and presence of the scratches, size and amount of nonmetalic inclusions in the die steel, nodular defects in the CrN - coating, as well as thicknesses uniformity of CrN - coatings along the bearing surface, are relevant influential parameters

    Poboljšavanje svojstava brzoreznog čelika 1.3302u vrućem stanju

    Get PDF
    Laboratory investigation of hot workability of 1.3302 high speed steel was carried out and its improving was achieved. Hot compression tests for the determination of optimal soaking temperature as well as for the study of hot workability in temperature range 1150-850 ºC, strain rates range 0,001-6 s–1 and applied strain up to 0,9 were performed. Microstructure of deformed specimen was analyzed. Apparent activation energies for hot working for upper and for lower temperature range were calculated. Onsets of dynamical recrystallization for applied deformation conditions on the basis of calculated strain hardening ratewere determined. Extending of hot working temperature range at its lower limit, i.e. down to 850 ºC, by applying optimal soaking temperature was obtained.Data su laboratorijska istraživanja prerađivačkih svojstva brzoreznog čelika 1.3302 u vrućem stanju koji su doprinijeli poboljšanju tih svojstava. Izvedeni su pokusi vrućeg sabijanja za određivanje temperature zagrijavanja kao i prerađivačkih svojstva u temperaturnom rasponu 1 150-850 ºC, brzinom deformacije 0,001-6 s–1 i stupnja deformacije do 0,9. Analizirana je mikrostruktura deformiranih proba.Izračunane su prividne aktivacijske energije za vruću preradu za gornje i donje temperaturno područje. Počeci dinamičke rekristalizacije za primijenjene uvjete deformacije utvrđeni su na temelju izračuna brzine deformacijskog očvršćavanja. Primjenjujući optimalno temperaturu zagrijavanja dobiveno je povećanje vrućeg radnog temperaturnog raspona na svojoj donjoj granici, odnosno do 850 ºC

    Increasing of hot workability of 1.3302HIGH speed steel

    Get PDF
    Laboratory investigation of hot workability of 1.3302 high speed steel was carried out and its improving was achieved. Hot compression tests for the determination of optimal soaking temperature as well as for the study of hot workability in temperature range 1150-850 ºC, strain rates range 0,001-6 s<sup>–1/sup> and applied strain up to 0,9 were performed. Microstructure of deformed specimen was analyzed. Apparent activation energies for hot working for upper and for lower temperature range were calculated. Onsets of dynamical recrystallization for applied deformation conditions on the basis of calculated strain hardening ratewere determined. Extending of hot working temperature range at its lower limit, i.e. down to 850 ºC, by applying optimal soaking temperature was obtained

    Primjena novo razvijenih testova sa grijanjem i unutarnjim hlađenjem uzoraka od alatnog čelika za različite primjene

    Get PDF
    In this study two new tests were developed, i.e., with continuous internal water cooling as well as discontinuous internal water and air cooling. It was proved that the first type of testing is appropriate for simulating the time course of the temperature at a selected depth of a thermally loaded, hot-working die surface layer, i.e., the temperature field on the die surface layer. The second type of testing is appropriate for a study of the thermal fatigue resistance of a tool material.U ovom istraživanju razvijeni su dva nova testa, tj. test sa kontinuiranom unutarnjim vodenim hlađenjem, kao i test sa diskontinuiranom unutarnjim vodenim i zračnim hlađenjem. Dokazano je da je prvi tip ispitivanja primjeran za simulaciju vremenske raspodjele temperature na odabranoj dubini termalno opterećene površine alata za vruću preradu. Druga vrsta ispitivanja je prikladno za proučavanje otpora termalnog zamora alatnog materijala
    corecore