230 research outputs found
Characterization of the Airborne Microbiome in Different Indoor and Outdoor Locations of a University Building Using an Innovative Compositional Data Analysis Approach
In this work, we investigated the structure of the airborne bacterial community obtained by 16S rRNA gene sequencing performed on aerosol samples from different indoor and outdoor locations. The 48-h aerosol samples were collected in two laboratories, in the corridors, and on the roof of the Mathematics and Physics Department of the University of Salento (Italy). The investigation was carried out through the application of an innovative compositional data analysis approach, mainly based on a centered log-ratio transformation as a standardization procedure, the Aitchison distance for data ordination, and the principal component analysis via singular value decomposition for data clustering. This methodology allowed us to explore the main relationships among samples, identifying different results between indoor and outdoor samples both at the genus level and at the species level. Bacillus and Pseudomonas represented the most abundant genera identified in the analyzed samples. Out of the 21 identified bacterial species with the highest abundances in the collected aerosol samples, Acinetobacter lwoffii, Propionibacterium acnes, Diplorickettsia massiliensis, and Corynebacterium tuberculostearicum were the only four commonly classified as human opportunistic pathogens. Among the genera mostly associated with indoor environments, Hymenobacter and Arthrobacter could be noted as including many species that are unique in being radiation resistant
X‐ray Tomography Unveils the Construction Technique of Un‐Montu’s Egyptian Coffin (Early 26th Dynasty)
The Bologna Archaeological Museum, in cooperation with prestigious Italian universities, institutions, and independent scholars, recently began a vast investigation programme on a group of Egyptian coffins of Theban provenance dating to the first millennium BC, primarily the 25th–26th Dynasty (c. 746–525 BC). Herein, we present the results of the multidisciplinary investigation car-ried out on one of these coffins before its restoration intervention: the anthropoid wooden coffin of Un‐Montu (Inv. MCABo EG1960). The integration of radiocarbon dating, wood species identifica-tion, and CT imaging enabled a deep understanding of the coffin’s wooden structure. In particular, we discuss the results of the tomographic investigation performed in situ. The use of a transportable X‐ray facility largely reduced the risks associated with the transfer of the large object (1.80 cm tall) out of the museum without compromising image quality. Thanks to the 3D tomographic imaging, the coffin revealed the secrets of its construction technique, from the rational use of wood to the employment of canvas (incamottatura), from the use of dowels to the assembly procedure
Magnetically Driven Floating Foams for the Removal of Oil Contaminants from Water
In this study, we present a novel composite material based on commercially available polyurethane foams functionalized with colloidal superparamagnetic iron oxide nanoparticles and submicrometer polytetrafluoroethylene particles, which can efficiently separate oil from water. Untreated foam surfaces are inherently hydrophobic and oleophobic, but they can be rendered water-repellent and oil-absorbing by a solvent-free, electrostatic polytetrafluoroethylene particle deposition technique. It was found that combined functionalization of the polytetrafluoroethylene-treated foam surfaces with colloidal iron oxide nanoparticles significantly increases the speed of oil absorption. Detailed microscopic and wettability studies reveal that the combined effects of the surface morphology and of the chemistry of the functionalized foams greatly affect the oil-absorption dynamics. In particular, nanoparticle capping molecules are found to play a major role in this mechanism. In addition to the water-repellent and oil-absorbing capabilities, the functionalized foams exhibit also magnetic responsivity. Finally, due to their light weight, they float easily on water. Hence, by simply moving them around oil-polluted waters using a magnet, they can absorb the floating oil from the polluted regions, thereby purifying the water underneath. This low-cost process can easily be scaled up to clean large-area oil spills in wate
New evidence of mis 3 relative sea level changes from the messina strait, Calabria (Italy)
none12Investigation of sea-level positions during the highly-dynamic Marine Isotope Stage 3 (MIS 3: 29–61 kyrs BP) proves difficult because: (i) in stable and subsiding areas, coeval coastal sediments are currently submerged at depths of few to several tens of meters below the present sea level; (ii) in uplifting areas, the preservation of geomorphic features and sedimentary records is limited due to the erosion occurred during the Last Glacial Maximum (LGM) with sea level at a depth of −130 m, followed by marine transgression that determined the development of ravinement surfaces. This study discusses previous research in the Mediterranean and elsewhere, and describes new fossiliferous marine deposits overlaying the metamorphic bedrock at Cannitello (Calabria, Italy). Radiocarbon ages of marine shells (about 43 kyrs cal BP) indicate that these deposits, presently between 28 and 30 m above sea level, formed during MIS 3.1. Elevation correction of the Cannitello outcrops (considered in an intermediate-to-far-field position with respect to the ice sheet) with the local vertical tectonic rate and Glacial Isostatic Adjustment (GIA) rate allows the proposal of a revision of the eustatic depth for this highstand. Our results are consistent with recently proposed estimates based on a novel ice sheet modelling technique.openAntonioli F.; Calcagnile L.; Ferranti L.; Mastronuzzi G.; Monaco C.; Orru P.; Quarta G.; Pepe F.; Scardino G.; Scicchitano G.; Stocchi P.; Taviani M.Antonioli, F.; Calcagnile, L.; Ferranti, L.; Mastronuzzi, G.; Monaco, C.; Orru, P.; Quarta, G.; Pepe, F.; Scardino, G.; Scicchitano, G.; Stocchi, P.; Taviani, M
Review submerged speleothems and sea level reconstructions: A global overview and new results from the mediterranean sea
This study presents a global overview of the submerged speleothems used to reconstruct paleo sea levels and reports new results from two stalactites collected in the Mediterranean Sea. Coastal cave deposits significantly contributed to the understanding of global and regional sea-level variations during the Middle and Late Quaternary. The studied speleothems cover the last 1.4 Myr and focused mainly on Marine Isotope Stages (MIS) 1, 2, 3, 5.1, 5.3, 5.5, 7.1, 7.2, 7.3 and 7.5. The results indicate that submerged speleothems represent extraordinary archives that can provide detailed information on former sea-level changes. The two stalactites collected in the central Mediterranean Sea, at Favignana and Ustica islands (Sicily, Italy), are both characterized by continental, phreatic or marine layers. The U-Th and14C ages of the new speleothems provide results of great interest for relative sea-level changes over the last 1000 years
Identifying the 993-994 CE Miyake event in the oldest dated living tree in Europe
Combined dendrochronology and accelerator mass spectrometry radiocarbon (AMS 14C) dating analyses were used in order to date an old living tree named Italus, growing in the Pollino massif in Southern Italy. Wiggle match AMS 14C dating analysis was performed on a 320-yr-long floating chronology obtained by cross-dating four wood cores extracted from the exposed roots of the tree. Following this approach, an age for the tree of ≈1230 yr was estimated. This age makes Italus the oldest living tree in Europe. High-resolution 14C dating analyses performed on single rings extracted from the tree stem allowed us to identify the 993.994 CE large excursion in atmospheric 14C concentration (Miyake event) revealing for the first time its presence in the Mediterranean basin
Thermal neutron conversion by high purity 10B-enriched layers: PLD-growth, thickness-dependence and neutron-detection performances
Neutron applications and detection are of paramount importance in industry, medicine, scientific research, homeland security, production of extreme UV optics and so on. Neutron detection requires a converter element that, as a result of its interaction with neutrons, produces reaction products (mainly charged particles) whose detection can be correlated with the neutron flux. Reduced availability and increased cost of the most used converter element, 3He, have triggered research efforts for alternative materials, proper deposition methods and new detector architectures. 10B converter is a valid alternative to 3He thanks to its high thermal neutron cross section and relatively high Q value. In this paper we report on the room temperature Pulsed Laser Deposition (PLD) of high quality and uniform 10B films with the expected density, different thickness values (0.5, 1.0, 1.2, 1.5 and 2.0 μm) and uniform thickness over a circular area of about 30 mm in diameter. Additionally, they are adherent to the substrate with a negligible presence of contaminants. The conversion properties of such 10B coatings coupled to a Si solid state detector are studied upon exposure to a neutron flux from an Am-Be neutron source (2.2·106 n/s). The experimental results, compared with spectra simulated by using a GEANT4 code, present a good agreement and efficiencies of the order of a few percent
Interplay between non-coding rna transcription, stringent/relaxed phenotype and antibiotic production in streptomyces ambofaciens
While in recent years the key role of non-coding RNAs (ncRNAs) in the regulation of gene expression has become increasingly evident, their interaction with the global regulatory circuits is still obscure. Here we analyzed the structure and organization of the transcriptome of Streptomyces ambofaciens, the producer of spiramycin. We identified ncRNAs including 45 small-RNAs (sRNAs) and 119 antisense-RNAs (asRNAs I) that appear transcribed from dedicated promoters. Some sRNAs and asRNAs are unprecedented in Streptomyces and were predicted to target mRNAs encoding proteins involved in transcription, translation, ribosomal structure and biogenesis, and regulation of morphological and biochemical differentiation. We then compared ncRNA expression in three strains: (i) the wild-type strain; (ii) an isogenic pirA-defective mutant with central carbon metabolism imbalance, “relaxed” phenotype, and repression of antibiotic production; and (iii) a pirA-derivative strain harboring a “stringent” RNA polymerase that suppresses pirA-associated phenotypes. Data indicated that the expression of most ncRNAs was correlated to the stringent/relaxed phenotype suggesting novel effector mechanisms of the stringent response
Radiocarbon dating of lumps from aerial lime mortars and plasters:Methodological issues and results from S. Nicolò of Capodimonte church (Camogli, Genoa – Italy)
The addition of S100B to guidelines for management of mild head injury is potentially cost saving
- …