Energy efficient engine preliminary design and integration studies

The characteristics and systems benefits of an energy efficient engine (E3) suitable for use on advanced subsonic transport aircraft were determined. Relative to a current CF6-50C engine, the following benefits were estimated: 14.4% reduction in installed cruise specific fuel consumption, and a reduction in direct operating cost of more than 5%. The advanced technology E3 system would also permit: compliance with FAR 36 (1977) noise limits, and compliance with 1981 EPA emission standards

Constraints on viewing geometries from radio observations of γ\gamma-ray-loud pulsars using a novel method

We present radio intensity and polarisation profiles of 28 $\gamma$-ray-detected pulsars with the aim of putting constraints on their viewing geometries using data from the Parkes telescope. Constraints are formed both from the goodness-of-fit of the position angles to the Rotating Vector Model and from the beam opening angle considering aberration and retardation effects. Uncertainties on the relevant parameters are systematically taken into account in order to produce a more robust constraint, using a new approach. Surprisingly, we find that the distribution of the magnetic inclination angle ($\alpha$) in this subset of pulsars peaks at low values, contrary to the predictions of $\gamma$-ray models. We find a lack of correlation between these and a set of $\alpha$ values which were derived using $\gamma$-ray light curves, suggesting a problem in the interpretation of the data in one or both of these domains. Finally, we also show that the $\alpha$ distribution of pulsars with multiple radio components is no different to that of single-component pulsars.Comment: 23 pages, 31 figures Submitted to MNRA

Decorating Random Quadrangulations

On various regular lattices (simple cubic, body centred cubic..) decorating an edge with an Ising spin coupled by bonds of strength L to the original vertex spins and competing with a direct anti-ferromagnetic bond of strength alpha L can give rise to three transition temperatures for suitable alpha. The system passes through ferromagnetic, paramagnetic, anti-ferromagnetic and paramagnetic phases respectively as the temperature is increased. For the square lattice on the other hand multiple decoration is required to see this effect. We note here that a single decoration suffices for the Ising model on planar random quadrangulations (coupled to 2D quantum gravity). Other random bipartite lattices such as the Penrose tiling are more akin to the regular square lattice and require multiple decoration to have any affect.Comment: 6 pages + 5 figure

Potts Models with (17) Invisible States on Thin Graphs

The order of a phase transition is usually determined by the nature of the symmetry breaking at the phase transition point and the dimension of the model under consideration. For instance, q-state Potts models in two dimensions display a second order, continuous transition for q = 2,3,4 and first order for higher q. Tamura et al recently introduced Potts models with "invisible" states which contribute to the entropy but not the internal energy and noted that adding such invisible states could transmute continuous transitions into first order transitions. This was observed both in a Bragg-Williams type mean-field calculation and 2D Monte-Carlo simulations. It was suggested that the invisible state mechanism for transmuting the order of a transition might play a role where transition orders inconsistent with the usual scheme had been observed. In this paper we note that an alternative mean-field approach employing 3-regular random ("thin") graphs also displays this change in the order of the transition as the number of invisible states is varied, although the number of states required to effect the transmutation, 17 invisible states when there are 2 visible states, is much higher than in the Bragg-Williams case. The calculation proceeds by using the equivalence of the Potts model with 2 visible and r invisible states to the Blume-Emery-Griffiths (BEG) model, so a by-product is the solution of the BEG model on thin random graphs.Comment: (2) Minor typos corrected, references update

Spontaneous Raman scattering for simultaneous measurements of in-cylinder species

A technique for multi-species mole fraction measurement in internal combustion engines is described. The technique is based on the spontaneous Raman scattering. It can simultaneously provide the mole fractions of several species of N-2, O-2, H2O, CO2 and fuel. Using the system, simultaneous measurement of air/fuel ratio and burnt residual gas are carried out during the mixture process in a Controlled Auto Ignition (CAI) combustion engine. The accuracy and consistency of the measured results were confirmed by the measured air fuel ratio using an exhaust gas analyzer and independently calculated mole fraction values. Measurement of species mole fractions during combustion process has also been demonstrated. It shows that the SRS can provide valuable data on this process in a CAI combustion engine

Active clearance control system for a turbomachine

An axial compressor is provided with a cooling air manifold surrounding a portion of the shroud, and means for bleeding air from the compressor to the manifold for selectively flowing it in a modulating manner axially along the outer side of the stator/shroud to cool and shrink it during steady state operating conditions so as to obtain minimum shroud/rotor clearance conditions. Provision is also made to selectively divert the flow of cooling air from the manifold during transient periods of operation so as to alter the thermal growth or shrink rate of the stator/shroud and result in adequate clearance with the compressor rotor

The Gonihedric Ising Model and Glassiness

The Gonihedric 3D Ising model is a lattice spin model in which planar Peierls boundaries between + and - spins can be created at zero energy cost. Instead of weighting the area of Peierls boundaries as the case for the usual 3D Ising model with nearest neighbour interactions, the edges, or "bends" in an interface are weighted, a concept which is related to the intrinsic curvature of the boundaries in the continuum. In these notes we follow a roughly chronological order by first reviewing the background to the formulation of the model, before moving on to the elucidation of the equilibrium phase diagram by various means and then to investigation of the non-equilibrium, glassy behaviour of the model.Comment: To appear as Chapter 7 in Rugged Free-Energy Landscapes - An Introduction, Springer Lecture Notes in Physics, 736, ed. W. Janke, (2008