190 research outputs found
Laser-Plasma driven synthesis of carbon-based nanomaterials
In this paper we introduce a laser-plasma driven method for the production of carbon based nanomaterials and in particular bi- and few-layers of Graphene. This is obtained by using laser-plasma exfoliation of amorphous Graphite in a liquid solution, employing a laser with energy in the order of 0.5 J/mm2. Raman and XPS analysis of a carbon colloidal performed at different irradiation stages indicate the formation of Graphene multilayers with an increasing number of layers: the amount of layers varies from a monolayer obtained in the first few seconds of the laser irradiation, up to two layers obtained after 10 s, and finally to Graphite and amorphous carbon obtained after 40 s of irradiation. The obtained colloidals are pure, without any presence of impurities or Graphene oxides, and can easily be deposited onto large surfaces (in the order of cm2) for being characterized or for being used in diverse applications
Design and optimization of a compact laser-driven proton beamline
Laser-accelerated protons, generated by irradiating a solid target with a short, energetic laser pulse at high intensity (I > 1018W·cm-2), represent a complementary if not outperforming source compared to conventional accelerators, due to their intrinsic features, such as high beam charge and short bunch duration. However, the broadband energy spectrum of these proton sources is a bottleneck that precludes their use in applications requiring a more reduced energy spread. Consequently, in recent times strong effort has been put to overcome these limits and to develop laser-driven proton beamlines with low energy spread. In this paper, we report on beam dynamics simulations aiming at optimizing a laser-driven beamline - i.e. a laser-based proton source coupled to conventional magnetic beam manipulation devices - producing protons with a reduced energy spread, usable for applications. The energy range of investigation goes from 2 to 20 MeV, i.e. the typical proton energies that can be routinely obtained using commercial TW-power class laser systems. Our beamline design is capable of reducing the energy spread below 20%, still keeping the overall transmission efficiency around 1% and producing a proton spot-size in the range of 10 mm2. We briefly discuss the results in the context of applications in the domain of Cultural Heritage
Design and optimization of a laser-PIXE beamline for material science applications
Multi-MeV proton beams can be generated by irradiating thin solid foils with ultra-intense (>10^18 W/cm^2) short laser pulses. Several of their characteristics, such as high bunch charge and short pulse duration, make them a complementary alternative to conventional radio frequency-based accelerators. A potential material science application is the chemical analysis of cultural heritage (CH) artifacts. The complete chemistry of the bulk material (ceramics, metals) can be retrieved through sophisticated nuclear techniques such as particle-induced X-ray emission (PIXE). Recently, the use of laser-generated proton beams was introduced as diagnostics in material science (laser-PIXE or laser-driven PIXE): Coupling laser-generated proton sources to conventional beam steering devices successfully enhances the capture and transport of the laser-accelerated beam. This leads to a reduction of the high divergence and broad energy spread at the source. The design of our hybrid beamline is composed of an energy selector, followed by permanent quadrupole magnets aiming for better control and manipulation of the final proton beam parameters. This allows tailoring both, mean proton energy and spot sizes, yet keeping the system compact. We performed a theoretical study optimizing a beamline for laser-PIXE applications. Our design enables monochromatizing the beam and shaping its final spot size. We obtain spot sizes ranging between a fraction of mm up to cm scale at a fraction of nC proton charge per shot. These results pave the way for a versatile and tunable laserPIXE at a multi-Hz repetition rate using modern commercially available laser systems
Laser-Generated Proton Beams for High-Precision Ultra-Fast Crystal Synthesis
We present a method for the synthesis of micro-crystals and micro-structured surfaces using laseraccelerated
protons. In this method, a solid surface material having a low melting temperature is
irradiated with very-short laser-generated protons, provoking in the ablation process thermodynamic
conditions that are between the boiling and the critical point. The intense and very quick proton energy
deposition (in the ns range) induces an explosive boiling and produces microcrystals that nucleate in a
plasma plume composed by ions and atoms detached from the laser-irradiated surface. The synthesized
particles in the plasma plume are then deposited onto a cold neighboring, non-irradiated, solid
secondary surface. We experimentally verify the synthesizing methods by depositing low-meltingmaterial
microcrystals - such as gold - onto nearby silver surfaces and modeling the proton/matter
interaction via a Monte Carlo code, confrming that we are in the above described thermodynamic
conditions. Morphological and crystallinity measurements indicate the formation of gold octahedral
crystals with dimensions around 1.2 μm, uniformly distributed onto a silver surface with dimensions
in the tens of mm2. This laser-accelerated particle based synthesis method paves the way for the
development of new material synthesis using ultrashort laser-accelerated particle beams
Modeling target bulk heating resulting from ultra-intense short pulse laser irradiation of solid density targets
Isochoric heating of solid-density matter up to a few tens of eV is of interest for investigating astrophysical or inertial fusion scenarios. Such ultra-fast heating can be achieved via the energy deposition of short-pulse laser generated electrons. Here, we report on experimental measurements of this process by means of time-and space-resolved optical interferometry. Our results are found in reasonable agreement with a simple numerical model of fast electron-induced heating. (C) 2013 AIP Publishing LLC.</p
Intrinsic normalized emittance growth in laser-driven electron accelerators
Laser-based electron sources are attracting strong interest from the conventional accelerator community due to their unique characteristics in terms of high initial energy, low emittance, and significant beam current. Extremely strong electric fields (up to hundreds of GV/m) generated in the plasma allow accelerating gradients much higher than in conventional accelerators and set the basis for achieving very high final energies in a compact space. Generating laser-driven high-energy electron beam lines therefore represents an attractive challenge for novel particle accelerators. In this paper we show that laser-driven electrons generated by the nowadays consolidated TW laser systems, when leaving the interaction region, are subject to a very strong, normalized emittance worsening which makes them quickly unusable for any beam transport. Furthermore, due to their intrinsic beam characteristics, controlling and capturing the full beam current can only be achieved improving the source parameters
Laser-driven electron beamlines generated by coupling laser-plasma sources with conventional transport systems
n/
- …