212 research outputs found
Compact Measurement Station for Low Energy Proton Beams
A compact, remote controlled, cost efficient diagnostic station has been
developed to measure the charge, the profile and the emittance for low energy
proton beams. It has been installed and tested in the proton beam line of the
Project Prometheus at SANAEM of the Turkish Atomic Energy Authority.Comment: 7 pages 2 column
Recent activity of the Be/X-ray binary system SAX J2103.5+4545
Aims. We present a multiwavelength study of the Be/X-ray binary system SAX
J2103.5+4545 with the goal of better characterizing the transient behaviour of
this source.
Methods. SAX J2103.5+4545 was observed by Swift-XRT four times in 2007 from
April 25 to May 5, and during quiescence in 2012 August 31. In addition, this
source has been monitored from the ground-based astronomical observatories of
El Teide (Tenerife, Spain), Roque de los Muchachos (La Palma, Spain) and Sierra
Nevada (Granada, Spain) since 2011 August, and from the TUBITAK National
Observatory (Antalya, Turkey) since 2009 June. We have performed spectral and
photometric temporal analyses in order to investigate the different states
exhibited by SAX J2103.5+4545.
Results. In X-rays, an absorbed power law model provided the best fit for all
the XRT spectra. An iron-line feature at ~6.42 keV was present in all the
observations except for that taken during quiescence in 2012. The photon
indexes are consistent with previous studies of SAX J2103.5+4545 in high/low
luminosity states. Pulsations were found in all the XRT data from 2007
(2.839(2) mHz; MJD 54222.02), but not during quiescence. Both optical outbursts
in 2010 and 2012 lasted for about 8/9 months (as the one in 2007 probably did
and the current one in 2014 might do) and were most probably caused by mass
ejection events from the Be star that eventually fed the circumstellar disc.
All of these outbursts started about 3 months before the triggering of the
X-ray activity, and about the same period before the maximum of the H_alpha
line equivalent width (in emission) was reached at only ~ -5 \AA. In this work
we found that the global correlation between the BV variability and the X-ray
intensity was also observed at longer wavelengths in the IR domain.Comment: 11 pages, 7 figures, and online material (2 tables). Submitted to A&A
in 2014 Januar
Comparison of Nutrition Status and Knowledge Level of Sports Trainers and Individuals Attended with Nine-Round Fitness Sports
The aim of this study was to determine and evaluate the nutritional knowledge levels and nutritional status of the sports trainers and individuals doing nine-round fitness sports, and compare the relationship between two groups. One hundred individuals doing sports and 10 trainers were included in the study. A questionnaire about general demographic information, anthropometric measurements, nutritional habits and sporting status were applied to the participants. In addition, 1-day retrospective food consumption record was taken to evaluate the intake levels of macro and micronutrients, and The Basic Nutrition Knowledge Level for Adults (YETBID) Scale was applied to measure the nutritional knowledge of the participants. The mean energy (kcal), protein (g), fat (g) and carbohydrate (g) intakes were found to be 1930±832,6, 117,8±61,3, 88±34,5, 159±111,1 for trainers and 1465±533, 81,8±33,9, 66,6±26,4, 128±76,9 for individuals doing sports, respectively. A significant difference was found between two groups in terms of energy intakes (p=0,042) whereas, no significant difference was found between the levels of macro nutrient intakes between trainers and individuals doing sports (p>0.05). According to the YETBID scores, it was found that the total score of individuals doing sports was significantly higher than trainers’ (p=0.037). It was concluded that the level of nutritional knowledge of sports trainers and individuals doing sports did not affect the nutritional status. Furthermore, dietitians should be present at sport centers and nutrition trainings should be arranged in order to prevent improper nutrition practices
Feasibility study of installation of solar panels on a high power HF antenna land
In HF broadcasting, the transmitters are typically very powerful. In the case of Turkish Radio and Television (TRT), total transmission average power may reach up to 5 MW. Therefore, it is natural to utilize solar panels as a means of alternative/backup energy for the continuous transmission of RF signal satisfying the requirement of broadcasting. In the TRT HF broadcasting array field, two areas are designated as the candidate areas for solar panel installation. In these areas, electric fields are simulated, measured, and compared. Simulations are done using the Numerical Electromagnetic Code (4nec2). The suitability of the regions for the solar panel installation are evaluated based on the ICNIRP human exposure limits. In addition, 4nec2 simulations are used to see the effect of metal frames of solar panels on the radiation patterns of the short-wave antenna arrays in the two solar panel candidate areas of TRT HF broadcasting station. Simulation results show that metal frames do not seem to have a significant effect on the radiation patterns of the short-wave antenna arrays. © 2016 Wiley Periodicals, Inc
An Equivalent Circuit Model for Nested Split-Ring Resonators
In this paper, an equivalent circuit model for nested split-ring resonators (NSRRs) is proposed. NSRRs are an emerging class of split ring resonators, preferred in a range of areas from sensing in biomedical or civil engineering applications to antenna design, due to their more compact size and enhanced sensitivity/resolution characteristics over the conventional SRRs. In the proposed model, the NSRR structure is treated as a combination of basic elements, i.e., strips and gaps, and the electromagnetic characteristics of the whole geometry are expressed in terms of capacitances and inductances of each of these elements. The outputs of the model are compared with those obtained via full-wave simulations using the package programs as well as measurements. The variation of NSRR resonance frequency (fres) with all important design parameters is also compared with full-wave simulations. In all comparisons, the results demonstrate agreement, showing that the proposed model can correctly explain the electromagnetics of the NSRR structure and that it provides an intuitive way for a better and easier analysis and a preliminary design of normally complex structures. © 2017 IEEE
An electromagnetic sensing system incorporating multiple probes and single antenna for wireless structural health monitoring
In this study, a wireless and passive displacement/strain sensing system is proposed for structural health monitoring (SHM). The wireless and passive interrogation of the sensing unit [a variant of a nested split-ring resonator (NSRR)] is achieved through the near-field interaction and electromagnetic coupling between the single antenna in the system and the multiple sensors called the NSRR probes. It is demonstrated that the system can acquire data from more than one NSRR probe simultaneously in a real-life scenario, where the probes are confined within concrete inside a beam, while the antenna monitors them from outside. © 2017 Euraap
A wireless passive sensing system for displacement/strain measurement in reinforced concrete members
In this study, we show a wireless passive sensing system embedded in a reinforced concrete member successfully being employed for the measurement of relative displacement and strain in a simply supported beam experiment. The system utilizes electromagnetic coupling between the transceiver antenna located outside the beam, and the sensing probes placed on the reinforcing bar (rebar) surface inside the beam. The probes were designed in the form of a nested split-ring resonator, a metamaterial-based structure chosen for its compact size and high sensitivity/resolution, which is at µm/microstrains level. Experiments were performed in both the elastic and plastic deformation cases of steel rebars, and the sensing system was demonstrated to acquire telemetric data in both cases. The wireless measurement results from multiple probes are compared with the data obtained from the strain gages, and an excellent agreement is observed. A discrete time measurement where the system records data at different force levels is also shown. Practical issues regarding the placement of the sensors and accurate recording of data are discussed. The proposed sensing technology is demonstrated to be a good candidate for wireless structural health monitoring (SHM) of reinforced concrete members by its high sensitivity and wide dynamic range. © 2016 by the authors; licensee MDPI, Basel, Switzerland
- …