4 research outputs found
Effect of Thermo-Hydro-Mechanical Treatment on Mechanical Properties of Wood Cellulose: A Molecular Dynamics Simulation
Based on molecular dynamics, a water and cellulose model was constructed to provide more theoretical support for the behavior characteristics of cellulose properties in thermo-hydro-mechanical treatment. In this paper, dynamic simulations were carried out under the NPT ensemble at 4, 5.5, 8, and 12 MPa, respectively. Moreover, we analyze the effects on the mechanical properties of wood cellulose in terms of the hydrogen bond numbers, small molecule diffusion coefficients, end-to-end distances, and mechanical parameters of the water–cellulose model. The results indicate that the densification of the water–cellulose model gradually increases with increasing pressure. The effect of pressures on mechanical properties is mainly due to the formation of massive hydrogen bonds within the cellulose chain and between water and cellulose. This is reflected in the fact that water molecules are more difficult to diffuse in the cellulose, which therefore weakens the negative effect of large amounts of water on the cellulose. The increase in end-to-end distance represents the stiffness of the cellulose chains being strengthened. The mechanical parameters indicate an increase in wood stiffness to resist deformation better, while reducing tensile properties at the same time. The dynamic simulation results in this paper can well correspond to macroscopic experiments
Effect of Thermo-Hydro-Mechanical Treatment on Mechanical Properties of Wood Cellulose: A Molecular Dynamics Simulation
Based on molecular dynamics, a water and cellulose model was constructed to provide more theoretical support for the behavior characteristics of cellulose properties in thermo-hydro-mechanical treatment. In this paper, dynamic simulations were carried out under the NPT ensemble at 4, 5.5, 8, and 12 MPa, respectively. Moreover, we analyze the effects on the mechanical properties of wood cellulose in terms of the hydrogen bond numbers, small molecule diffusion coefficients, end-to-end distances, and mechanical parameters of the water–cellulose model. The results indicate that the densification of the water–cellulose model gradually increases with increasing pressure. The effect of pressures on mechanical properties is mainly due to the formation of massive hydrogen bonds within the cellulose chain and between water and cellulose. This is reflected in the fact that water molecules are more difficult to diffuse in the cellulose, which therefore weakens the negative effect of large amounts of water on the cellulose. The increase in end-to-end distance represents the stiffness of the cellulose chains being strengthened. The mechanical parameters indicate an increase in wood stiffness to resist deformation better, while reducing tensile properties at the same time. The dynamic simulation results in this paper can well correspond to macroscopic experiments
Weak electricity stimulates biological nitrate removal of wastewater: Hypothesis and first evidences
International audienceNitrate pollution in water is a worldwide health and environmental concern. Biological nitrate removal of wastewater is widely used countering eutrophication of water bodies; however it could be troublesome and expensive when influent carbon source is insufficient. Here we present a novel process, the microbial fuel cell (MFC)-resistance-type electrical stimulation denitrification process (RtESD) using microbial weak electricity originated from the wastewater, to enhance nitrate removal. Results show that the optimal nitrate dependent denitrification rate (0.027 mg N/L·h) and nitrate removal efficiency (98.1%) can be achieved; partial autotrophic denitrification was enhanced in RtESD under stimulation of 0.2 V of microbial weak electricity (MWE). Aromatic proteins also increased in the presence of 0.2 V MWE stimulation according to three-dimensional excitation-emission matrix (3D-EEM) fluorescence spectroscopy profiles, indicating that electron transfer could be improved in the case of MWE stimulation. Furthermore, the microbial community structure and diversity analysis results demonstrated that MWE stimulation inhibited the heterotrophic denitrifying bacteria and activated the autotrophic denitrifying bacteria in RtESD. Two hypotheses, enhancement of electron transfer and improvement of microorganism activity, were proposed regarding to the MWE stimulated pathways. This study provided a promising method utilizing MWE derived from wastewater to improve the denitrification rate and removal efficiency of nitrate-containing wastewater treatment processes
Immunity Enhancement in Immunocompromised Gastrointestinal Cancer Patients with Allogeneic Umbilical Cord Blood Mononuclear Cell Transfusion
Objectives. In order to enhance the immunity of cancer patients to prevent relapse or to prolong survival time, umbilical cord blood mononuclear cells (UCMCs) were transplanted to cancer patients. Patients and Methods. UCMCs were transfused to 63 immunocompromised gastrointestinal cancer patients with nonmyeloablative (NMA) conditioning regimen. Results. The clinical study showed that the number of both T and B cells increased much more rapidly after transfusion of UCMCs than that of the control group without transplantation (p0.05). Conclusions. UCMCs have powerful repairing effects on damaged cells and tissues and may reconstruct the impaired immunity. Transfusion of UCMCs could reconstruct the immunity of cancer patients with immunosuppression