Management of Occupational Manganism: Consensus of an Experts' Panel

Studies and Research Projects / Report R-417, Montréal, IRSST http://www.irsst.qc.ca/en/_publicationirsst_100134.html (Lucchini R was a member of the Expert Panel

Direct Metal Laser-sintered Stainless Steel: Comparison Of Microstructure And Hardness Between Different Planes

Microstructural analysis and micro-hardness measurements were performed on different planes of 316L stainless steel fabricated by direct metal laser sintering (DMLS) technique. A fine cellular network was observed within the steel microstructure, where morphology of most cells changed from columnar on XZ-plane (vertical section) to equiaxed on XY-plane (horizontal section). Correspondingly, morphology of most grains was found to alter from columnar for the XZ-plane to equiaxed in the case of the XY-plane. Moreover, X-ray diffraction (XRD) analysis revealed a fully austenitic structure for both the planes. The average micro-hardness value for the XZ-plane and XY-plane was insignificantly (≈ 3%) different, which was attributed to the random grain orientation observed on both the planes. However, the average micro-hardness of the DMLS-fabricated 316L stainless steel in this contribution was approximately 25% higher than that of the as-cast one

Recent studies of dispersion matched steering for the ILC bunch compressor and main linac

The Dispersion Matched Steering (DMS) method is studied in detail in the context of a curved main linac. In the absence of cavity tilts (rotations in the YZ plane), DMS provides a unique and stable solution with negligible emittance growth. If cavity tilts are about 300 {micro}rad, the algorithm is not very robust. The emittance growth through the entire linac for positrons is about 5 nm, if the system is strictly static and statistical averaging can be used to improve beam position measurements. This growth is mostly eliminated if the dispersion and its derivative at injection can be adjusted. If anticipated ground motion, beam and klystron jitter, beam position measurement resolution are introduced (i.e. dynamical case), the emittance preservation goal is currently not achieved by DMS alone. Mitigation strategies are outlined

Experimental Measurement Of Residual Stress And Distortion In Additively Manufactured Stainless Steel Components With Various Dimensions

Disk-shaped 316L stainless steel parts with various diameters and heights were additively manufactured using a direct metal laser sintering (DMLS) technique. Neutron diffraction was used to profile the residual stresses in the samples before and after removal of the build plate and support structures. Moreover, distortion level of the parts before and after the removal was quantified using a coordinate measuring machine (CMM). Large tensile in-plane stresses (up to ≈ 400 MPa) were measured near the as-built disk top surfaces, where the stress magnitude decreased from the disk center to the edges. The stress gradient was steeper for the disks with smaller diameters and heights. Following the removal of the build plate and support structures, the magnitude of the in-plane residual stresses decreased dramatically (up to 330 MPa) whereas the axial stress magnitude did not change significantly. The stress relaxation caused the disks to distort, where the distortion metric was higher for the disks with smaller diameters and heights. The distribution of the residual stresses revealed a marked breakdown of self-similarity in their distribution even comparing disk-shaped samples that were fabricated under identical printing parameters; the stress field profiles were not linearly scaled as a function of height and diameter

Moving beyond European and Latin American Typologies:The Peculiarities of AKP’s Populism in Turkey

Despite the growing literature on Turkish populism, there is yet no consensus on how best to categorise the Justice and Development Party (Adalet ve Kalkınma Partisi or AKP). This article argues that this lack of consensus is due to a selective focus on the attributes of AKP’s populism. Indeed, when the party’s features are examined holistically, it does not neatly conform to the dominant typologies of populism, which were conceived mostly for European and Latin American examples. For historical reasons, AKP’s populist discourse defines “the people” versus “the elite” in civilisational terms and combines this with strategies of neo-liberalism, strong party organisation and grassroots mobilisation. This blend of populism distinguishes the AKP case from the exclusionary/inclusionary and classical/neo-liberal/radical typologies previously identified by the literature. However, the Bharatiya Janata Party in India and the Thai Rak Thai Party in Thailand have similar attributes to the AKP, drawing attention to the need to move beyond the existing ideological and strategic approaches to populism and towards a more comprehensive socio-cultural approach. The article contributes to the literature on populism by highlighting possible avenues for further research based on such a comprehensive understanding of populism based also on cases from Asia

Hybrid Permanent Magnet Gradient Dipoles for the Recycler Ring at Fermilab

Abstract -Hybrid permanent magnets provide the magnetic fields for an anti-proton storage ring which is under construction at Fermilab. Using a combined function lattice, gradient magnets provide the bending, focusing and sextupole correction for the regular cells. Shorter magnets without sextupole are used in dispersion suppressor cells. These magnets use a 4.7 m ( 3 m) long iron shell for flux return, bricks of 25.4 mm thick strontium ferrite supply the flux and transversely tapered iron poles separated by aluminum spacers set the shape of the magnetic field. Central fields of 0.14 T with gradients of ≈6%/inch (≈13%/inch) are required. Field errors are expected to be less than 10 −4 of the bend field over an aperture of ±40 mm (horizontal) × ±20 mm (vertical). Design, procurement, fabrication, pole potential adjustment, field shape trimming and measured fields will be reported

Muon (g-2) Technical Design Report

The Muon (g-2) Experiment, E989 at Fermilab, will measure the muon anomalous magnetic moment a factor-of-four more precisely than was done in E821 at the Brookhaven National Laboratory AGS. The E821 result appears to be greater than the Standard-Model prediction by more than three standard deviations. When combined with expected improvement in the Standard-Model hadronic contributions, E989 should be able to determine definitively whether or not the E821 result is evidence for physics beyond the Standard Model. After a review of the physics motivation and the basic technique, which will use the muon storage ring built at BNL and now relocated to Fermilab, the design of the new experiment is presented. This document was created in partial fulfillment of the requirements necessary to obtain DOE CD-2/3 approval