Output Impedance Improvement Using Coupled Inductors

When using a single DC/DC converter with multiple outputs and having a buck topology, which has one filter inductor per output, the designer can choose to couple these outputs together. This paper demonstrates additional benefits of coupling output inductors together. Apart from saving mass and volume, and due to an improved small signal behaviour it also reduces the output impedance of the regulated output. The paper will analyse a seven output push-pull converter used as a space power converter module and verify the theoretical results with experimental measurements

Air-exposure behavior: a restricted or a common conduct among intertidal hermit crabs?

A new behavior related to shell care was recently reported for the intertidal hermit crab Clibanarius erythropus (Latreille, 1818) in the Gulf of Cádiz (southwestern Europe). It also has been observed in other species of the diogenid genera Clibanarius Dana, 1952, and Calcinus Dana, 1951, however, it has not been described as an active behavior. In the present study, intertidal hermit crabs from different species and localities were sampled to assess if air-exposure is a shell cleaning behavior restricted to some species of intertidal hermit crabs or if it is a more generalized behavior among species inhabiting intertidal habitats. The results revealed that air-exposure is an active behavior in species of Clibanarius and Calcinus, since we observed it also in Clibanarius albidigitus Nobili, 1901, and Calcinus obscurus Stimpson, 1859, from the Pacific coast of Costa Rica, although not in other intertidal species studied by us. We found interspecific differences in tolerance to physical stress of emerged hermit crabs. This air-exposure tolerance can be interpreted as a physiological adaptation to desiccation stress and is also related to the shell type they inhabit. Also, we provide additional features and details of the air-exposure behavior, combining observations of the first description in 2015 with our new field observations.UCR::Vicerrectoría de Investigación::Unidades de Investigación::Ciencias Básicas::Centro de Investigación en Ciencias del Mar y Limnología (CIMAR)UCR::Vicerrectoría de Docencia::Ciencias Básicas::Facultad de Ciencias::Escuela de Biologí

Failure Rate Measurement on Silicon Diodes Reverse Polarized at High Temperature

This paper calculates the failure rate on reversed polarized silicon diodes with the aim to justify, experimentally, the rules of the European Space Agency (ESA) which are referred to the component life’s extension, the reliability increase and the end of life performance enhancement, by using oversized devices (derating rules). In order to verify the derating rules, 80 silicon diodes are used, which are reverse polarized in a high temperature environment. The diodes are divided in 4 groups of 20 diodes, applying a different voltage to each group, in order to relate the failure rate to the applied derating rule. The experiment described in this paper is developed using a temperature accelerated test to check the leakage current in reverse polarization (HTRB - High Temperature Reverse Bias), with the purpose of obtaining results applying an acceleration factor in order to reduce the test duration. By using a thermal model of the whole system and the equations that describe the reverse polarized diode behaviour, it is possible to stress the 80 diodes up to very high temperature avoiding the runaway effect. Finally, the failure rate is calculated and a revision of the derating rules are proposed by using the experimental result obtained

Failure Rate Measurement on Silicon Diodes Reverse Polarized at High Temperature

This paper calculates the failure rate on reversed polarized silicon diodes with the aim to justify, experimentally, the rules of the European Space Agency (ESA) which are referred to the component life’s extension, the reliability increase and the end of life performance enhancement, by using oversized devices (derating rules). In order to verify the derating rules, 80 silicon diodes are used, which are reverse polarized in a high temperature environment. The diodes are divided in 4 groups of 20 diodes, applying a different voltage to each group, in order to relate the failure rate to the applied derating rule. The experiment described in this paper is developed using a temperature accelerated test to check the leakage current in reverse polarization (HTRB - High Temperature Reverse Bias), with the purpose of obtaining results applying an acceleration factor in order to reduce the test duration. By using a thermal model of the whole system and the equations that describe the reverse polarized diode behaviour, it is possible to stress the 80 diodes up to very high temperature avoiding the runaway effect. Finally, the failure rate is calculated and a revision of the derating rules are proposed by using the experimental result obtained

Output Impedance Improvement Using Coupled Inductors

When using a single DC/DC converter with multiple outputs and having a buck topology, which has one filter inductor per output, the designer can choose to couple these outputs together. This paper demonstrates additional benefits of coupling output inductors together. Apart from saving mass and volume, and due to an improved small signal behaviour it also reduces the output impedance of the regulated output. The paper will analyse a seven output push-pull converter used as a space power converter module and verify the theoretical results with experimental measurements

Output Impedance Improvement Using Coupled Inductors

When using a single DC/DC converter with multiple outputs and having a buck topology, which has one filter inductor per output, the designer can choose to couple these outputs together. This paper demonstrates additional benefits of coupling output inductors together. Apart from saving mass and volume, and due to an improved small signal behaviour it also reduces the output impedance of the regulated output. The paper will analyse a seven output push-pull converter used as a space power converter module and verify the theoretical results with experimental measurements

Corticosterone metabolites in blue tit and pied flycatcher droppings: Effects of brood size, ectoparasites and temperature

The hypothalamic-pituitary-adrenal (HPA) axis of birds induces the secretion of corticosterone (CORT) as a response to different ecological variables. In this study we tested experimentally if manipulations of brood size or ectoparasitism led to subsequent differences in the concentration of excreted CORT metabolites of adult and nestling blue tits (Cyanistes caeruleus). No significant effect of the manipulation of brood size was detected in adults or nestlings. No significant effect of ectoparasitism was detected in males or nestlings, although females from uninfested nests showed lower concentrations of excreted CORT metabolites. In addition, we analysed if weather conditions had an influence on the concentration of excreted CORT metabolites of blue tits and pied flycatchers (Ficedula hypoleuca) breeding in the same forest. We detected no effect of weather conditions on adults, but nestlings of both species showed a negative correlation between their excreted CORT metabolites and the average mean temperatures they were subjected to during their growth. This effect was not found in blue tits in a colder year, suggesting that the sensitivity of the HPA axis to ambient temperature may be subjected to interannual variation. Moreover, we found a positive effect of the maximum temperature on the day of sampling on the concentration of CORT metabolites of blue tit nestlings in one of the years. These results suggest that weather conditions may act as environmental stressors to which the HPA axis of blue tit and pied flycatcher nestlings may be sensitive

Corticosterone metabolites in blue tit and pied flycatcher droppings: Effects of brood size, ectoparasites and temperature

The hypothalamic-pituitary-adrenal (HPA) axis of birds induces the secretion of corticosterone (CORT) as a response to different ecological variables. In this study we tested experimentally if manipulations of brood size or ectoparasitism led to subsequent differences in the concentration of excreted CORT metabolites of adult and nestling blue tits (Cyanistes caeruleus). No significant effect of the manipulation of brood size was detected in adults or nestlings. No significant effect of ectoparasitism was detected in males or nestlings, although females from uninfested nests showed lower concentrations of excreted CORT metabolites. In addition, we analysed if weather conditions had an influence on the concentration of excreted CORT metabolites of blue tits and pied flycatchers (Ficedula hypoleuca) breeding in the same forest. We detected no effect of weather conditions on adults, but nestlings of both species showed a negative correlation between their excreted CORT metabolites and the average mean temperatures they were subjected to during their growth. This effect was not found in blue tits in a colder year, suggesting that the sensitivity of the HPA axis to ambient temperature may be subjected to interannual variation. Moreover, we found a positive effect of the maximum temperature on the day of sampling on the concentration of CORT metabolites of blue tit nestlings in one of the years. These results suggest that weather conditions may act as environmental stressors to which the HPA axis of blue tit and pied flycatcher nestlings may be sensitive.