5,429 research outputs found
Stress analysis and fatigue life prediction of a wobble-plate
A five-stage compressor for compressing natural gas is being designed and evaluated. The compressor operates at 1500 rpm with natural gas pressure of 50 psi. This study examines deformation behavior, stress and strain distribution of the wobble plate component of the compressor. Fatigue loading on the wobble plate is computed from the reaction of compressed gas in each of the five cylinders. The highest pressure in the 5th cylinder is 3000 psi. The calculated stress evolution per revolution of the wobble plate is utilized to predict the fatigue lives of the wobble plate. The fatigue life prediction is performed using Brown-Miller algorithm with Morrow mean stress correction method. Results show that the stress is concentrated in the vicinity of the contact region between the guide plate and the polymer guide ball. The highest stress in the wobble plate and the polymer guide ball is 160.4 MPa and 127.8 MPa respectively. The corresponding predicted fatigue life of the wobble plate is 8x108 cycles. A higher stress gradient in the guide ball (max von Mises stress is 3.3 GPa) is predicted when a harder steel ball is employed. This is due to high stiffness of the mating plate/ball surfaces
Conflict with Others at a Bleeding Frontier: The Case of Tagoi in the Northeastern Nuba Mountains â Sudan
This article looks at the escalating conflict between the Tagoi and Hawazma and their allies over natural resources and political authority in the north-eastern Nuba Mountains, from the Tagoiâs perspective. It explains why and how the Tagoi Area has become a free zone for settlement by the Hawazma and their allies, who have succeeded in developing an independent native administration in the area and have begun to contest the Tagoiâs rights to political authority and land. It illustrates how security concerns associated with the Second Civil War between the government of Sudan (GoS) and the Sudan Peopleâs Liberation Movement/Army (SPLM/A) first and the Sudan/South Sudan international border after the secession of South Sudan in 2011 have contributed to the escalation of this conflict. It also shows how this conflict has recently become entangled with the armed conflict between the GoS and the SPLM/A-North, thus attaining a new dimension
A study on perfluorohexyloctane (F6H8) and perfluorobutylpentane (F4H5) through nuclear magnetic resonance
Experiences of physics teachers when implementing problem-based learning : a case study at Entsikeni cluster in the Harry Gwala District Kwazulu-Natal, South Africa
Problem-based learning (PBL) is an active teaching strategy that could be implemented in the South African educational system to assist in developing problem-solving skills, critical thinking skills, collaborative skills, self-directed learning and intrinsic motivation in students. Even though it is not easy to drift from a teacher-centred strategy to a student-centred strategy, but this drift is supposed to be a paradigm drift for the nation. âPhysics is difficultâ has been the anthem of students in South African high schools. This has led to lower pass rates in physics and as a result low physics career person in society. Physics students in high schools need to be exposed to the PBL strategy since the PBL strategy focuses on real-life problems to develop problem-solving skills, critical thinking skills and self-directed learning in students which are the skills needed for concept formation in Physical Science. Basically, the education of Physical Science students focused on the ability to acquire skills to solve real-life problems. This study focuses on exploring the experiences of high school physics teachers at Entsikeni cluster, South African, when implementing problem-based learning (PBL) in their physics classrooms. The study uses the mixed-method approach where three different research instruments were used to collect quantitative and qualitative data sequentially. Questionnaires, RTOP and interview protocol were employed. The findings of the study indicate that teachers project positive attitudes toward the PBL strategy but may probably not continue to use it because it requires more time than that which is allocated in the Curriculum Assessment and Policy Statement (CAPS) Physical Science document and as a result may not be able to finish their ATP on time. Teachers are teaching physics with no specialization in physics, which probably could lead to poor, pass rates in Physical Science. Teachers were inexperienced in teaching physics in the FET and could probably affect studentsâ academic performance. It is recommended they apply the PBL strategy to correct the negative effect of their inexperience on studentsâ performance. It is evident that if inexperienced trained teachers apply an instructional strategy based on research, they tend to develop students' performance as compared to applying the traditional instructional strategy.Science and Technology EducationM. Sc. (Physics Education
OctNetFusion: Learning Depth Fusion from Data
In this paper, we present a learning based approach to depth fusion, i.e.,
dense 3D reconstruction from multiple depth images. The most common approach to
depth fusion is based on averaging truncated signed distance functions, which
was originally proposed by Curless and Levoy in 1996. While this method is
simple and provides great results, it is not able to reconstruct (partially)
occluded surfaces and requires a large number frames to filter out sensor noise
and outliers. Motivated by the availability of large 3D model repositories and
recent advances in deep learning, we present a novel 3D CNN architecture that
learns to predict an implicit surface representation from the input depth maps.
Our learning based method significantly outperforms the traditional volumetric
fusion approach in terms of noise reduction and outlier suppression. By
learning the structure of real world 3D objects and scenes, our approach is
further able to reconstruct occluded regions and to fill in gaps in the
reconstruction. We demonstrate that our learning based approach outperforms
both vanilla TSDF fusion as well as TV-L1 fusion on the task of volumetric
fusion. Further, we demonstrate state-of-the-art 3D shape completion results.Comment: 3DV 2017, https://github.com/griegler/octnetfusio
Latent curing of epoxy-thiol thermosets
Epoxy-thiol curing is a click reaction which allows quantitative yield of the end products. The base-catalyzed reaction is rapid at low temperatures so it is most often desirable to harness reactivity by using latent catalysts. In this work, we used triazabicyclodecene tetraphenylborate (TBD·HBPh4) as a photobase generator (PB). We activated the PB either thermally or by UV light and monitored reaction kinetics by DSC and FTIR methods. Depending on the catalytic system used, the rate of the thiol-epoxy reaction was ordered as follows: Neat base > UV activated PB > thermally activated PB > uncatalyzed system. A series of isothermal and non-isothermal DSC experiments were run on non-irradiated and irradiated samples in order to study the effect of PB content and UV irradiation duration on PB activation efficiency and latency/storage stability. The data from DSC were analyzed using model-free linear isoconversional methods to estimate kinetic parameters such as activation energies. In addition, the kinetics data for both activation methods were shown to be accurately represented by multi-term Kamal models. The storage stability of the systems were studied at room temperature and was shown to fit well to the predictions of the kinetic model.Postprint (author's final draft
- âŠ