Wetting on Lines and Lattices of Cylinders

This paper discusses wetting and capillary condensation transitions on a line and a rectangular array of cylinders using an interface potential formalism. For a line of cylinders, there is a capillary condensation transition followed by complete wetting if the cylinders are sufficiently close together. Both transitions disappear as the cylinder separation is increased. The dependence of the wetting phase diagram of a rectangular array of cylinders is discussed as a function of the chemical potential, substrate--fluid interaction strength and surface tension.Comment: 17 pages in total: 11 pages of Latex document and 6 pages of figures, Latex Version 2.09, OUTP-93-40

Does Seasonality Change over the Business Cycle? An Investigation using Monthly Industrial Production Series

This paper examines the proposition that the business cycle affects seasonality in industrial production, with output being switched to the traditionally low production summer months when recent (annual) growth has been strong. This is investigated through the use of a restricted threshold autoregressive model for the monthly growth rate in a total of 74 industries from 16 OECD countries. Approximately one third of the series exhibit significant nonlinearity, with this nonlinearity predominantly associated with changes in the seasonal pattern. Estimates show that the summer slowdown in many European countries is substantially reduced when recent growth has been high.

Leading-edge vortex research: Some nonplanar concepts and current challenges

Some background information is provided for the Vortex Flow Aerodynamics Conference and that current slender wing airplanes do not use variable leading edge geometry to improve transonic drag polar is shown. Highlights of some of the initial studies combining wing camber, or flaps, with vortex flow are presented. Current vortex flap studies were reviewed to show that there is a large subsonic data base and that transonic and supersonic generic studies have begun. There is a need for validated flow field solvers to calculate vortex/shock interactions at transonic and supersonic speeds. Many important research opportunities exist for fundamental vortex flow investigations and for designing advanced fighter concepts

Performance of a 1.15-pressure-ratio axial-flow fan stage with a blade tip solidity of 0.5

The overall and blade-element performance of a low-solidity, low-pressure-ratio, low-tip-speed fan stage is presented over the stable operating range at rotative speeds from 90 to 120 percent of design speed. At design speed a stage peak efficiency of 0.836 was obtained at a weight flow of 30.27 kilograms per second and a pressure ratio of 1.111. The pressure ratio was less than design pressure ratio, and the design energy input into the rotor was not achieved. A mismatch of the rotor and stator blade elements resulted due to the lower than design pressure ratio of the rotor

Development of an innovative method for the evaluation of fungal contamination of surfaces

The objective of this technical report is to compare the ability to capture fungal spores through samples performed with three different methods: Rodac contact plates, cotton pad and a pad prepared with a dusting cloth (DC pads) selected from those available on the market. The tests were conducted using a suspension of Aspergillus niger conidia equal to 0.5 MacFarland diluted 1/30, 1/40, 1/50, 1/100. With each of these dilutions 3 sterile tiles of stainless steel were contaminated, each divided into 16 small squares, in the center of which 0.1 ml of the dilution chosen was placed and left to dry (for a total of 12 sheets). In addition, we have used other 6 tiles to repeat the experience with dilutions 1/40 and 1/50. A total of 288 squared surfaces were contaminated: 96 of these were sampled with Rodac contact plates, 96 with cotton pads and 96 with DC and then inseminated in Petri plates. Sabouraud dextrose agar was used as culture medium for the first 12 plates, while, for the other 6 plates Sabouraud dextrose agar added with lecithin and polysorbate 80 was used. All plates were incubated at 37 degrees for 18 hours. To estimate the differences among the sampling methods and the dilutions tested, multiple linear regression was used. The analysis showed that the number of colonies harvested at dilution 1/40 is 13% higher (P = 0.09) than the number harvested at dilution 1/50 and the number of colonies harvested at dilution 1/30 is 6% higher than dilution 1/50 (P = 0.52). With regard to the comparison between the number of colonies harvested with Rodac contact plates, with cotton pads and DC pads, regression analysis shows that cotton pads harvest a number of fungal cfu 5 times higher than those detected with Rodac plates, while DC pads harvest a number of fungal ufc 6 times higher than those detected with Rodac plates (P < 0.00005). These results, although preliminary, indicate that DC pads are a sensitive and simple approach for the environmental control of fungal contamination