Optimization of the spark plasma sintering conditions for the consolidation of hydroxyapatite powders and characterization of the obtained products

A comparative investigation regarding the consolidation behavior displayed by three commercially available hydroxyapatite powders during Spark Plasma Sintering (SPS) is performed in this work. Starting powders are different in terms of purity, particle size, morphology and thermochemical stability. A completely dense product without secondary species is produced by SPS at 900 °C, when starting from highly pure powders with relatively small sized particles and grains. The resulting consolidated material, consisting of sub-micrometer sized hydroxyapatite grains, exhibits optical transparency and good mechanical properties. On the other hand, temperature levels up to 1,200 °C are needed to sinter powders with larger particles. This holds also true when relatively finer powders are used, also containing CaHPO4, are used. In both the latter cases products with coarser microstructures and/or significant amount of β-TCP, as a result of hydroxyapatite decomposition, are obtained. Optical, chemical resistance and mechanical properties of the resulting dense materials are correspondingly deteriorated

High-Entropy Diborides—Silicon Carbide Composites by Reactive and Non-Reactive Spark Plasma Sintering: A Comparative Study

The reactive spark plasma sintering (R-SPS) method was compared in this work with the two-step SHS–SPS route, based on the combination of the self-propagating high-temperature synthesis (SHS) with the SPS process, for the fabrication of dense (Hf0.2Mo0.2Ti0.2Ta0.2Nb0.2)B2–SiC and (Hf0.2Mo0.2Ti0.2Ta0.2Zr0.2)B2–SiC ceramics. A multiphase and inhomogeneous product, containing various borides, was obtained at 2000 °C/20 min by R-SPS from transition metals, B4C, and Si. In contrast, if the same precursors were first reacted by SHS and then processed by SPS under the optimized condition of 1800 °C/20 min, the desired ceramics were successfully attained. The resulting sintered samples possessed relative densities above 97% and displayed uniform microstructures with residual oxide content <2.4 wt.%. The presence of SiC made the sintering temperature milder, i.e., 150 °C below that needed by the corresponding additive-free system. The fracture toughness was also markedly improved, particularly when considering the Nb-containing system processed at 1800 °C/20 min, whereas the fracture toughness progressively decreased (from 7.35 to 5.36 MPa m1/2) as the SPS conditions became more severe. SiC addition was found to inhibit the volatilization of metal oxides like MoO3 formed during oxidation experiments, thus avoiding mass loss in the ceramics. The benefits above also likely took advantage of the fact that the two composite constituents were synthesized in parallel, according to the SHS–SPS approach, rather than being produced separately and combined subsequently, so that strong interfaces between them were formed

Optical properties of bulk high-entropy diborides for solar energy applications

So far, the studies regarding the innovative High-Entropy Borides (HEBs), which belong to the more general class of Ultra-high temperature ceramics (UHTCs), have been entirely confined to their fabrication or characterization from the microstructural, mechanical and oxidation resistance viewpoints. In this work, the optical properties of two members of HEBs, i.e. (Hf0.2Zr0.2Ta0.2Mo0.2Ti0.2)B2 and (Hf0.2Nb0.2Ta0.2Mo0.2Ti0.2)B2, are evaluated for the first time to assess their possible utilization in the thermal solar energy field. The bulk samples (96.5 % and 97.4 % dense, respectively) are obtained as single-phase products by Spark Plasma Sintering (1950 °C/20 min/20 MPa) starting from powders previously synthesized by Self-propagating High-temperature Synthesis (SHS). The optical characterization, whose results are discussed by comparing HEBs to the individual borides, shows that they are characterized by intrinsic spectral selectivity and low thermal emittance, resulting therefore interesting for high-temperature solar absorbers applications

Efficacy of ozonated water as a PS in photodynamic therapy: A tool for dental caries management? An in vitro study

Background: The most prevalent noncommunicable disease in the world is dental caries; and when it is not adequately treated, it is usually associated with tooth loss or severe dental lesions. In fact, expensive care or tooth extraction may be necessary due to the negative effects dental caries have on general health. This is due to its frequent pain and secondary bacterial infections. The aim of this study was to investigate the activity of ozonated water as such and in combination with appropriate light radiation so as to perform a photodynamic treatment (PDT) against the cariogenic bacterium Streptococcus mutans. Design and methods: This work has been performed in vitro by using an S. mutans strain mainly structured in a biofilm status, reproducing the natural condition of the tooth infection. The ozone was tested at three different concentrations by using a commercial device able to generate different O3 formulations in water. The PDT treatment requires an appropriate light wavelength, evaluated in this work through the UV-Vis adsorption spectrum of the ozonated water. Results: The obtained results suggested an effective and synergic property of O3 and light at 460–470nm against this microorganism. The most antibiofilm activity was observed using a concentration of ozone of 0.06mg/L alone as well as with PDT treatment. Conclusions: The results are encouraging for additional research and in vitro/in vivo fresh experimental investigations to perform an exhaustive antimicrobial treatment protocol against the S. mutans tooth infection

Crystal Structure of 3-Hydroxybenzoate 6-Hydroxylase Uncovers Lipid-assisted Flavoprotein Strategy for Regioselective Aromatic Hydroxylation.

3-Hydroxybenzoate 6-hydroxylase (3HB6H) from Rhodococcus jostii RHA1 is a dimeric flavoprotein that catalyzes the NADH- and oxygen-dependent para-hydroxylation of 3-hydroxybenzoate to 2,5-dihydroxybenzoate. In this study, we report the crystal structure of 3HB6H as expressed in Escherichia coli. The overall fold of 3HB6H is similar to that of p-hydroxybenzoate hydroxylase and other flavoprotein aromatic hydroxylases. Unexpectedly, a lipid ligand is bound to each 3HB6H monomer. Mass spectral analysis identified the ligand as a mixture of phosphatidylglycerol and phosphatidylethanolamine. The fatty acid chains occupy hydrophobic channels that deeply penetrate into the interior of the substrate-binding domain of each subunit, whereas the hydrophilic part is exposed on the protein surface, connecting the dimerization domains via a few interactions. Most remarkably, the terminal part of a phospholipid acyl chain is directly involved in the substrate-binding site. Co-crystallized chloride ion and the crystal structure of the H213S variant with bound 3-hydroxybenzoate provide hints about oxygen activation and substrate hydroxylation. Essential roles are played by His-213 in catalysis and Tyr-105 in substrate binding. This phospholipid-assisted strategy to control regioselective aromatic hydroxylation is of relevance for optimization of flavin-dependent biocatalysts

What unrelated hematopoietic stem cell transplantation in thalassemia taught us about transplant immunogenetics

Although the past few decades have shown an improvement in the survival and complication-free survival rates in patients with beta-thalassemia major and gene therapy is already at an advanced stage of experimentation, hematopoietic stem cell transplantation (HSCT) continues to be the only effective and realistic approach to the cure of this chronic nonmalignant disease. Historically, human leukocyte antigen (HLA)-matched siblings have been the preferred source of donor cells owing to superior outcomes compared with HSCT from other sources. Nowadays, the availability of an international network of voluntary stem cell donor registries and cord blood banks has significantly increased the odds of finding a suitable HLA matched donor. Stringent immunogenetic criteria for donor selection have made it possible to achieve overall survival (OS) and thalassemia-free survival (TFS) rates comparable to those of sibling transplants. However, acute and chronic graft-versus-host disease (GVHD) remains the most important complication in unrelated HSCT in thalassemia, leading to significant rates of morbidity and mortality for a chronic non-malignant disease. A careful immunogenetic assessment of donors and recipients makes it possible to individualize appropriate strategies for its prevention and management. This review provides an overview of recent insights about immunogenetic factors involved in GVHD, which seem to have a potential role in the outcome of transplantation for thalassemia

Fingerprint Presentation Attacks: Tackling the Ongoing Arms Race in Biometric Authentication

The widespread use of Automated Fingerprint Identification Systems (AFIS) in consumer electronics opens for the development of advanced presentation attacks, i.e. procedures designed to bypass an AFIS using a forged fingerprint. As a consequence, AFIS are often equipped with a fingerprint presentation attack detection (FPAD) module, to recognize live fingerprints from fake replicas, in order to both minimize the risk of unauthorized access and avoid pointless computations. The ongoing arms race between attackers and detector designers demands a comprehensive understanding of both the defender’s and attacker’s perspectives to develop robust and efficient FPAD systems. This paper proposes a dual-perspective approach to FPAD, which encompasses the presentation of a new technique for carrying out presentation attacks starting from perturbed samples with adversarial techniques and the presentation of a new detection technique based on an adversarial data augmentation strategy. In this case, attack and defence are based on the same assumptions demonstrating that this dual research approach can be exploited to enhance the overall security of fingerprint recognition systems against spoofing attacks

LivDet2023 - Fingerprint Liveness Detection Competition: Advancing Generalization

The International Fingerprint Liveness Detection Competition (LivDet) is a biennial event that invites academic and industry participants to prove their advancements in Fingerprint Presentation Attack Detection (PAD). This edition, LivDet2023, proposed two challenges, "Liveness Detection in Action" and "Fingerprint Representation", to evaluate the efficacy of PAD embedded in verification systems and the effectiveness and compactness of feature sets. A third, "hidden" challenge is the inclusion of two subsets in the training set whose sensor information is unknown, testing participants' ability to generalize their models. Only bona fide fingerprint samples were provided to participants, and the competition reports and assesses the performance of their algorithms suffering from this limitation in data availability

Dense nanocrystalline W alloys: Enhancement of hardness and thermal stability by Al addition

Nanocrystalline W100-xAlx (x up to 20 at.%) powders obtained by mechanical alloying have been consolidated by spark plasma sintering (SPS). Alloying W with Al significantly improves the sinterability, allowing the fabrication of dense samples. The consolidation process keeps the nanocrystalline microstructure substantially unaffected, which contributes to the hardness of the final W-Al alloys. The room-temperature nano-and micro-hardness of dense W80Al20 alloy sintered at 1100 degrees C are as high as 18 and 14 GPa, respectively. These values are significantly higher than those previously reported for pure coarse-or submicron-grained W and may be ultimately ascribed to the grain boundary segregation of Al

Progress with the LOFAR Imaging Pipeline

One of the science drivers of the new Low Frequency Array (LOFAR) is large-area surveys of the low-frequency radio sky. Realizing this goal requires automated processing of the interferometric data, such that fully calibrated images are produced by the system during survey operations. The LOFAR Imaging Pipeline is the tool intended for this purpose, and is now undergoing significant commissioning work. The pipeline is now functional as an automated processing chain. Here we present several recent LOFAR images that have been produced during the still ongoing commissioning period. These early LOFAR images are representative of some of the science goals of the commissioning team members.Comment: 11 pages, 6 figures. Accepted for publication in proceedings of "ISKAF2010 Science Meeting", PoS(ISKAF2010)05