Water migration in unsaturated partially hydrophobic soils

This article presents new insights into effects of hydrophobic particles on water migration in fine graded soils. The experimental setup for this study uses a column of soil instrumented with sensors that allows direct measurements of soil water content at different heights of the column during capillary rise, infiltration under imposed pressure and drainage. To precisely determine the proportion of hydrophobic particles the fine grained soil was mixed with microparticles of Teflon (PTFE). The water retention curve was measured for mixtures with three different percentages of hydrophobic particles: 0%, 2%, and 5% by weight. In addltion, the water repulsion curve of the PTFE particles was measured using a water intrusion test. This test showed high water repellency that modifies the unsaturated characteristics of the mixtures. Results of this study show a huge effect of hydrophobic particles on capillary rise, but water repellency decreases when pressure is imposed and becomes relevant again during the drainage process. This study provides a new survey that could be useful for understanding the benefits and limitations of soil treatments with hydrophobic chemical products.Magíster en Ingeniería CivilMaestrí

Engineered-inhaled particles: influence of carbohydrates excipients nature on powder properties and behavior

peer reviewedPulmonary drug administration has long been used for local or systemic treatment due to several advantages. Dry powder inhalers (DPI) emerge as the most promising due to efficiency, ecologic, and drug stability concerns. Coarse lactose-carrier is still the gold standard when inhalation powders are developed. Despite some efforts to produce new types of powders, the lung drug deposition is still poorly controlled which will ultimately impact therapeutic effectiveness. The goal of this study is to develop an inhaled powder leading to a deep and uniform deposition of 2 different active pharmaceutical ingredients (API). We developed “engineered-inhalation powders” using the spray-drying technique. Multiple carbohydrates excipients were binary mixed and combined with two active pharmaceutical ingredients for asthma therapy (budesonide and formoterol). Particle morphology was characterized by the number and the depth of dimples, measured from SEM images. We define a new characteristic deflation ratio ξ as the product between the number of dimples and their depth. Six different powders having opposite morphologies have been selected and we have demonstrated a linear correlation between the fine particle fraction (FPF) and the deflation ratio of produced powders.AEROPERF - Win2Wa

XVII International Congress of Control Electronics and Telecommunications: "Advanced Science, Technology and Innovation to move towards a new socio-technical system: Sustainable Social Transformation"

Contenido: Approach to the diagnostic of cesarean birth using bio-inspired models. ; Design of a tool in a virtual reality environment to manipulate anatomical models. ; The effect of COVID-19 restrictions on the electricity price forecasting models. ; Depression prevention through artificial intelligence. ; State of the art in Prototypes as complements to the learning of the Colombian Sign Language (LSC). ; A computational proposal for gene expression deterministic analysis in associated disorders to depression and anxiety. ; Evaluation of postural stability from the predictability of the measurement of the center of pressure. ; Psychophysiological Analysis of Sound Stimuli.; Delphi method for the identification of relevant variables in the development of low-power photovoltaic solar projects. ; Socioeconomic impact of a refrigerator powered by a photovoltaic system in La Guajira. ; Energy Efficiency: characteristics that allow the reduction of greenhouse gases in. ; Possibilities for the implementation of a bioreactor from organic waste. ; Energy Potential with Small Hydroelectric Power Plants in Non- interconnected Zones of Colombia. ; Energy Potential in Photovoltaic Solar Solutions in Non-Interconnected Areas of Colombia. ; Photovoltaic system, towards the energy transition from home. ; Blockchain model to increase the transparency of public sector processes. ; Intelligent agricultural irrigation prescription system based on sensor networks and crop modeling. ; Design and implementation of a digital modulation classification system using intelligent algorithms. ; A mobile application proposal to minimize intermediation during agricultural process distribution of products in supply chain. ; Accompanying strategy for the social appropriation of new technologies in vulnerable agricultural communities: case in communities producing Gulupas fruits (Passiflora edulis Sims). ; Predictive model of transparency as an indicator of Public Policies. ; Smart system for recognition of ripening level in blackberry fruits. ; Project-based learning as an alternative methodology for technological education in electronics. ; Design and construction of an automated system for N. ; Four bar mechanisms (FBM) and their Software-Based applications: a reviewFT aquaponic culture of Red Carp and Crespa Lettuce. ; Intelligent search implementation for the construction of states of the art: a python application. ; Indoor and Outdoor propagation models on 5G environments: state of the art. ;The electronic detection of offenders (DOO) in the District Secretary of mobility of Bogotá: a step forward in the configuration of the concept of digital citizenship in Colombia. ; Monitoring through ICT of Mobility: technological collaborative feature to incorporate IoT in a Smart City. ; Characterization model of asphalt mixtures using digital image processing. ; Review: identification of diseases and/or pests in fruit trees through image processing techniques and artificial intelligence. ; VRS applicated to Nasa Yuwe language. ; Application of Pix2Pix for edge reconstruction in images. ; Brushless DC Motor Control System for Active Myoelectric Prosthesis. ; Implementation of a Water Conductivity Measuring System. ; 2 DOF robot programmed with MatLab® (guide and Peter Corke) and Arduino uno for writing alphabetical characters. ; Simulator of the behavior of the center of mass in a quadruped robot. ; Biomimetic prototype for flapping movement of batsContent: Contenido: Approach to the diagnostic of cesarean birth using bio-inspired models. ; Design of a tool in a virtual reality environment to manipulate anatomical models. ; The effect of COVID-19 restrictions on the electricity price forecasting models. ; Depression prevention through artificial intelligence. ; State of the art in Prototypes as complements to the learning of the Colombian Sign Language (LSC). ; A computational proposal for gene expression deterministic analysis in associated disorders to depression and anxiety. ; Evaluation of postural stability from the predictability of the measurement of the center of pressure. ; Psychophysiological Analysis of Sound Stimuli.; Delphi method for the identification of relevant variables in the development of low-power photovoltaic solar projects. ; Socioeconomic impact of a refrigerator powered by a photovoltaic system in La Guajira. ; Energy Efficiency: characteristics that allow the reduction of greenhouse gases in. ; Possibilities for the implementation of a bioreactor from organic waste. ; Energy Potential with Small Hydroelectric Power Plants in Non- interconnected Zones of Colombia. ; Energy Potential in Photovoltaic Solar Solutions in Non-Interconnected Areas of Colombia. ; Photovoltaic system, towards the energy transition from home. ; Blockchain model to increase the transparency of public sector processes. ; Intelligent agricultural irrigation prescription system based on sensor networks and crop modeling. ; Design and implementation of a digital modulation classification system using intelligent algorithms. ; A mobile application proposal to minimize intermediation during agricultural process distribution of products in supply chain. ; Accompanying strategy for the social appropriation of new technologies in vulnerable agricultural communities: case in communities producing Gulupas fruits (Passiflora edulis Sims). ; Predictive model of transparency as an indicator of Public Policies. ; Smart system for recognition of ripening level in blackberry fruits. ; Project-based learning as an alternative methodology for technological education in electronics. ; Design and construction of an automated system for N. ; Four bar mechanisms (FBM) and their Software-Based applications: a reviewFT aquaponic culture of Red Carp and Crespa Lettuce. ; Intelligent search implementation for the construction of states of the art: a python application. ; Indoor and Outdoor propagation models on 5G environments: state of the art. ;The electronic detection of offenders (DOO) in the District Secretary of mobility of Bogotá: a step forward in the configuration of the concept of digital citizenship in Colombia. ; Monitoring through ICT of Mobility: technological collaborative feature to incorporate IoT in a Smart City. ; Characterization model of asphalt mixtures using digital image processing. ; Review: identification of diseases and/or pests in fruit trees through image processing techniques and artificial intelligence. ; VRS applicated to Nasa Yuwe language. ; Application of Pix2Pix for edge reconstruction in images. ; Brushless DC Motor Control System for Active Myoelectric Prosthesis. ; Implementation of a Water Conductivity Measuring System. ; 2 DOF robot programmed with MatLab® (guide and Peter Corke) and Arduino uno for writing alphabetical characters. ; Simulator of the behavior of the center of mass in a quadruped robot. ; Biomimetic prototype for flapping movement of bat