574 research outputs found

    Fundamental properties of solar-like oscillating stars from frequencies of minimum Δν\Delta \nu : II. Model computations for different chemical compositions and mass

    Full text link
    The large separations between the oscillation frequencies of solar-like stars are measures of stellar mean density. The separations have been thought to be mostly constant in the observed range of frequencies. However, detailed investigation shows that they are not constant, and their variations are not random but have very strong diagnostic potential for our understanding of stellar structure and evolution. In this regard, frequencies of the minimum large separation are very useful tools. From these frequencies, in addition to the large separation and frequency of maximum amplitude, Y\i ld\i z et al. recently have developed new methods to find almost all the fundamental stellar properties. In the present study, we aim to find metallicity and helium abundances from the frequencies, and generalize the relations given by Y\i ld\i z et al. for a wider stellar mass range and arbitrary metallicity (ZZ) and helium abundance (YY). We show that the effect of metallicity is { significant} for most of the fundamental parameters. For stellar mass, for example, the expression must be multiplied by (Z/Z_{\sun})^{0.12}. For arbitrary helium abundance, M \propto (Y/Y_{\sun})^{0.25} . Methods for determination of ZZ and YY from pure asteroseismic quantities are based on amplitudes (differences between maximum and minimum values of \Dnu) in the oscillatory component in the spacing of oscillation frequencies. Additionally, we demonstrate that the difference between the first maximum and the second minimum is very sensitive to ZZ. It also depends on νmin1/νmax\nu_{\rm min1}/\nu_{\rm max} and small separation between the frequencies. Such a dependence leads us to develop a method to find ZZ (and YY) from oscillation frequencies. The maximum difference between the estimated and model ZZ values is about 14 per cent. It is 10 per cent for YY.Comment: 8 pages, 13 figures; published in MNRAS (2015

    Comparison of Gaia and asteroseismic distances

    Full text link
    Asteroseismology provides fundamental properties (mass, radius and effective temperature) of solar-like oscillating stars using so-called scaling relations. These properties allow the computation of the asteroseismic distance of stars. We compare the asteroseismic distances with the recently released Gaia distances for 74 stars studied in Y{\i}ld{\i}z et al. There is a very good agreement between these two distances; for 64 of these stars, the difference is less than 10 per cent. However, a systematic difference is seen if we use the effective temperature obtained by spectroscopic methods; the Gaia distances are about 5 per cent greater than the asteroseismic distances.Comment: 4 pages, 4 figures, accepted by MNRA

    On the structure and evolution of planets and their host stars - effects of various heating mechanisms on the size of giant gas planets

    Full text link
    It is already stated in the previous studies that the radius of the giant planets is affected by stellar irradiation. The confirmed relation between radius and incident flux depends on planetary mass intervals. In this study, we show that there is a single relation between radius and irradiated energy per gram per second (ll_-), for all mass intervals. There is an extra increase in radius of planets if ll_- is higher than 1100 times energy received by the Earth (ll_\oplus). This is likely due to dissociation of molecules. The tidal interaction as a heating mechanism is also considered and found that its maximum effect on the inflation of planets is about 15 per cent. We also compute age and heavy element abundances from the properties of host stars, given in the TEPCat catalogue (Southworth 2011). The metallicity given in the literature is as [Fe/H]. However, the most abundant element is oxygen, and there is a reverse relation between the observed abundances [Fe/H] and [O/Fe]. Therefore, we first compute [O/H] from [Fe/H] by using observed abundances, and then find heavy element abundance from [O/H]. We also develop a new method for age determination. Using the ages we find, we analyse variation of both radius and mass of the planets with respect to time, and estimate the initial mass of the planets from the relation we derive for the first time. According to our results, the highly irradiated gas giants lose 5 per cent of their mass in every 1 Gyr.Comment: 15 pages, 13 figures, 3 tables. Accepted by MNRA

    Asteroseismic Investigation of 20 Planet and Planet-Candidate Host Stars

    Full text link
    Planets and planet candidates are subjected to great investigation in recent years. In this study, we analyse 20 planet and planet-candidate host stars at different evolutionary phases. We construct stellar interior models of the host stars with the MESA evolution code and obtain their fundamental parameters under influence of observational asteroseismic and non-asteroseismic constraints. Model mass range of the host stars is 0.74-1.55 M{\rm M}_\odot. The mean value of the so-called large separation between oscillation frequencies and its variation about the minima show the diagnostic potential of asteroseismic properties. Comparison of variations of model and observed large separations versus the oscillation frequencies leads to inference of fundamental parameters of the host stars. Using these parameters, we revise orbital and fundamental parameters of 34 planets and four planet candidates. According to our findings, radius range of the planets is 0.35-16.50 R\mathrm{R}_{\oplus}. The maximum difference between the transit and revised radii occurs for Kepler-444b-f is about 25 per cent.Comment: 9 pages, 7 figures, 6 table

    Morphometric and morphological evaluation of mastoid emissary canal using cone-beam computed tomography

    Get PDF
    Objectives: This study aimed to determine mastoid emissary canal’s (MEC) and mastoid foramen (MF) prevalence and morphometric characteristics on cone-beam computed tomography (CBCT) images to underline its clinical significance and discuss its surgical consequences. Methods: In the retrospective analysis, two oral and maxillofacial radiologists analyzed the CBCT images of 135 patients (270 sides). The biggest MF and MEC were measured in the images evaluated in MultiPlanar Reconstruction (MPR) views. The MF and MEC mean diameters were calculated. The mastoid foramina number was recorded. The prevalence of MF was studied according to gender and side of the patient. Results: The overall prevalence of MEC and MF was 119 (88.1%). The prevalence of MEC and MF is 55.5% in females and 44.5% in males. MEC and MF were identified as bilateral in 80 patients (67.20%) and unilateral in 39 patients (32.80%). The mean diameter of MF was 2.4 ± 0.9 mm. The mean height of MF was 2.3 ± 0.9. The mean diameter of the MEC was 2.1 ± 0.8, and the mean height of the MEC was 2.1 ± 0.8. There is a statistical difference between the genders (p = 0.043) in foramen diameter. Males had a significantly larger mean diameter of MF in comparison to females. Conclusion: MEC and MF must be evaluated thoroughly if the surgery is contemplated. Radiologists and surgeons should be aware of mastoid emissary canal morphology, variations, clinical relevance, and surgical consequences while operating in the suboccipital and mastoid areas to avoid unexpected and catastrophic complications. CBCT may be a reliable imaging diagnostic technique

    Effect of Ankaferd Blood Stopper on Early Bone Tissue Healing in Extraction Sockets: An Experimental In vivo Study

    Get PDF
    Purpose: To investigate the effect of Ankaferd blood stopper (ABS) on early bone healing of extraction sockets in rats.Method: Twenty-eight male Wistar rats were divided into four groups. The maxillary right first molar tooth of the rats was extracted under general anesthesia. Two groups (C-1, n = 6 and C-2, n = 6) received saline solutions in the extraction sockets immediately and one day after the extraction, respectively, while two groups (A-1, n = 8 and A-2, n = 8) received ABS. The rats in A-1 and C-1 groups were sacrificed after 7 days of post-extraction while the rats in A-2 and C-2 groups were sacrificed after 28 days. Bone samples were taken from the maxillas, and tissues were prepared for histopathological analysis. Osteoid tissue (OT), mineralized bone tissue (MT), remaining area (RA), and inflammatory cell infiltration (ICI) were determined. The histomorphometric results were analyzed statistically using analysis of variance (ANOVA).Results Osteoid formation was highest in C-1 group (39.71 ± 9.68, p < 0.05). Differences in OT among other groups were not significant (p > 0.05). MT was higher in C-2 group (47.73 ± 12.15) than in other groups (p < 0.05). RA was highest in C-1 group (59.95 ± 12.75). ICI was significantly lower in control (C1 and C-2) groups than in ABS (A-1 and A-2) groups (p < 0.05).Conclusion: ABS administered topically to extraction sockets immediately after extraction has no effect on bone healing; in fact, ABS increases inflammation in vivo

    Fundamental properties of Kepler and CoRoT targets -- IV. Masses and radii from frequencies of minimum Δν\Delta {\nu} and their implications

    Full text link
    Recently, by analysing the oscillation frequencies of 90 stars, Yildiz, \c{C}elik Orhan & Kayhan have shown that the reference frequencies (νmin0\nu_{\rm min0}, νmin1\nu_{\rm min1} and νmin2\nu_{\rm min2}) derived from glitches due to He {\scriptsize II} ionization zone have very strong diagnostic potential for the determination of their effective temperatures. In this study, we continue to analyse the same stars and compute their mass, radius and age from different scaling relations including relations based on νmin0\nu_{\rm min0}, νmin1\nu_{\rm min1} and νmin2\nu_{\rm min2}. For most of the stars, the masses computed using νmin0\nu_{\rm min0} and νmin1\nu_{\rm min1} are very close to each other. For 38 stars, the difference between these masses is less than 0.024 M{\rm M}_\odot. The radii of these stars from νmin0\nu_{\rm min0} and νmin1\nu_{\rm min1} are even closer, with differences of less than 0.007 R{\rm R}_\odot. These stars may be the most well known solar-like oscillating stars and deserve to be studied in detail. The asteroseismic expressions we derive for mass and radius show slight dependence on metallicity. We therefore develop a new method for computing initial metallicity from this surface metallicity by taking into account the effect of microscopic diffusion. The time dependence of initial metallicity shows some very interesting features that may be important for our understanding of chemical enrichment of Galactic Disc. According to our findings, every epoch of the disc has its own lowest and highest values for metallicity. It seems that rotational velocity is inversely proportional to 1/2 power of age as given by the Skumanich relation.Comment: 19 pages, 12 figure

    A solitary primary subcutaneous hydatid cyst in the abdominal wall of a 70-year-old woman: a case report

    Get PDF
    <p>Abstract</p> <p>Introduction</p> <p>A solitary primary hydatid cyst in the subcutaneous abdominal wall is an exceptional entity, even in countries where the <it>Echinococcus </it>infestation is endemic.</p> <p>Case presentation</p> <p>We report a case of a 70-year-old Caucasian woman who presented to our hospital with a subcutaneous mass in the para-umbilical area with a non-specific clinical presentation. The diagnosis of subcutaneous hydatid cyst was suspected on the basis of radiological findings. A complete surgical resection of the mass was performed and the patient had an uneventful post-operative recovery. The histopathology confirmed the suspected diagnosis.</p> <p>Conclusion</p> <p>Hydatid cyst should be considered in the differential diagnosis of every subcutaneous cystic mass, especially in regions where the disease is endemic. The best treatment is the total excision of the cyst with an intact wall.</p

    Ba3Ga3N5 - A Novel Host Lattice for Eu2+ - Doped Luminescent Materials with Unexpected Nitridogallate Substructure

    Get PDF
    The alkaline earth nitridogallate Ba3Ga3N5 was synthesized from the elements in a sodium flux at 760°C utilizing weld shut tantalum ampules. The crystal structure was solved and refined on the basis of single-crystal X-ray diffraction data. Ba3Ga3N5 (space group C2/c (No. 15), a = 16.801(3), b = 8.3301(2), c = 11.623(2) Å, β = 109.92 (3)°, Z = 8) contains a hitherto unknown structural motif in nitridogallates, namely, infinite strands made up of GaN4 tetrahedra, each sharing two edges and at least one corner with neighboring GaN4 units. There are three Ba2+ sites with coordination numbers six or eight, respectively, and one Ba2+ position exhibiting a low coordination number 4 corresponding to a distorted tetrahedron. Eu2+ - doped samples show red luminescence when excited by UV irradiation at room temperature. Luminescence investigations revealed a maximum emission intensity at 638 nm (FWHM =2123 cm−1). Ba3Ga3N5 is the first nitridogallate for which parity allowed broadband emission due to Eu2+ - doping has been found. The electronic structure of both Ba3Ga3N5 as well as isoelectronic but not isostructural Sr3Ga3N5 was investigated by DFT methods. The calculations revealed a band gap of 1.53 eV for Sr3Ga3N5 and 1.46 eV for Ba3Ga3N5
    corecore