30,420 research outputs found
Ice shapes and the resulting drag increase for a NACA 0012 airfoil
Experimental measurements of the ice shapes and resulting drag increases were measured in the NASA-Lewis Icing Research Tunnel. The measurements were made over a large range of conditions (e.g., airspeed and temperature, drop size and liquid water content of the cloud, and the angle of attack of the airfoil). The measured drag increase did not agree with the existing correlation. Additional results were given which are helpful in understanding the ice structure and the way it forms, and in improving the ice accretion modeling theories. There are data on the ice surface roughness, on the effect of the ice shape on the local droplet catch, and on the relative importance of various parts of the ice shape on the drag increase. Experimental repeatability is also discussed
Remote systems development
Potential space missions of the nineties and the next century require that we look at the broad category of remote systems as an important means to achieve cost-effective operations, exploration and colonization objectives. This paper addresses such missions, which can use remote systems technology as the basis for identifying required capabilities which must be provided. The relationship of the space-based tasks to similar tasks required for terrestrial applications is discussed. The development status of the required technology is assessed and major issues which must be addressed to meet future requirements are identified. This includes the proper mix of humans and machines, from pure teleoperation to full autonomy; the degree of worksite compatibility for a robotic system; and the required design parameters, such as degrees-of-freedom. Methods for resolution are discussed including analysis, graphical simulation and the use of laboratory test beds. Grumman experience in the application of these techniques to a variety of design issues are presented utilizing the Telerobotics Development Laboratory which includes a 17-DOF robot system, a variety of sensing elements, Deneb/IRIS graphics workstations and control stations. The use of task/worksite mockups, remote system development test beds and graphical analysis are discussed with examples of typical results such as estimates of task times, task feasibility and resulting recommendations for design changes. The relationship of this experience and lessons-learned to future development of remote systems is also discussed
Apollo experience report: Command and service module controls and displays subsystem
A review of the command and service module controls and displays subsystem is presented. The subsystem is described, and operational requirements, component history, problems and solutions, and conclusions and recommendations for the subsystem are included
Heat transfer distributions around nominal ice accretion shapes formed on a cylinder in the NASA Lewis icing research tunnel
Local heat transfer coefficients were obtained on irregular cylindrical shapes which typify the accretion of ice on circular cylinders in cross flow. The ice shapes were grown on a 5.1 cm (2.0 in.) diameter cylinder in the NASA Lewis Icing Research Tunnel. The shapes were 2, 5, and 15 min accumulations of glaze ice and 15 min accumulation of rime ice. Heat transfer coefficients were also measured around the cylinder with no ice accretion. These icing shapes were averaged axially to obtain a nominal shape of constant cross section for the heat transfer tests. Heat transfer coefficients around the perimeter of each shape were measured with electrically heated copper strips embedded in the surface of the model which was cast from polyurethane foam. Each strip contained a thermocouple to measure the local surface temperature. The models were run in a 15.2 x 68.6 cm (6 x 27 in.) wind tunnel at several velocities. Background turbulence in the wind tunnel was less than 0.5 percent. The models were also run with a turbulence producing grid which gave about 3.5 percent turbulence at the model location with the model removed. The effect of roughness was also simulated with sand grains glued to the surface. Results are presented as Nusselt number versus angle from the stagnation line for the smooth and rough models for both high and low levels of free stream turblence. Roughness of the surface in the region prior to flow separation plays a major role in determining the heat transfer distribution
Aircraft icing research at NASA
Research activity is described for: ice protection systems, icing instrumentation, experimental methods, analytical modeling for the above, and in flight research. The renewed interest in aircraft icing has come about because of the new need for All-Weather Helicopters and General Aviation aircraft. Because of increased fuel costs, tomorrow's Commercial Transport aircraft will also require new types of ice protection systems and better estimates of the aeropenalties caused by ice on unprotected surfaces. The physics of aircraft icing is very similar to the icing that occurs on ground structures and structures at sea; all involve droplets that freeze on the surfaces because of the cold air. Therefore all icing research groups will benefit greatly by sharing their research information
NASA Lewis Research Center's Program on Icing Research
The helicopter and general aviation, light transport, and commercial transport aircraft share common icing requirements: highly effective, lightweight, low power consuming deicing systems, and detailed knowledge of the aeropenalties due to ice on aircraft surfaces. To meet current and future needs, NASA has a broadbased icing research program which covers both research and engineering applications, and is well coordinated with the FAA, DOD, universities, industry, and some foreign governments. Research activity in ice protection systems, icing instrumentation, experimental methods, analytical modeling, and in-flight research are described
Quantum field effects in coupled atomic and molecular Bose-Einstein condensates
This paper examines the parameter regimes in which coupled atomic and
molecular Bose-Einstein condensates do not obey the Gross-Pitaevskii equation.
Stochastic field equations for coupled atomic and molecular condensates are
derived using the functional positive-P representation. These equations
describe the full quantum state of the coupled condensates and include the
commonly used Gross-Pitaevskii equation as the noiseless limit. The model
includes all interactions between the particles, background gas losses,
two-body losses and the numerical simulations are performed in three
dimensions. It is found that it is possible to differentiate the quantum and
semiclassical behaviour when the particle density is sufficiently low and the
coupling is sufficiently strong.Comment: 4 postscript figure
First principles structures and circular dichroism spectra for the close-packed and the 7/2 motif of collagen
The recently proposed close-packed motif for collagen is investigated using
first principles semi-empirical wave function theory and Kohn-Sham density
functional theory. Under these refinements the close-packed motif is shown to
be stable. For the case of the 7/2 motif a similar stability exists. The
electronic circular dichroism of the close-packed model has a significant
negative bias and a large signal. An interesting feature of the close-packed
structure is the existence of a central channel. Simulations show that, if
hydrogen atoms are placed in the cavity, a chain of molecular hydrogens is
formed suggesting a possible biological function for molecular hydrogen.Comment: 12 pages, 3 figures; 3(PPG)_6 xyz file attached; v2: minor
modification
Thermodynamic properties of Pb determined from pressure-dependent critical-field measurements
We have carried out extensive low-temperature (1.5 to 10 K) measurements of
the critical field, , for the element Pb up to a pressure of GPa.
From this data the electronic entropy, specific heat, thermal expansion
coefficient and compressibility is calculated as a function of temperature,
pressure and magnetic field. The zero-field data is consistent with direct
thermodynamic measurements and the -dependence of and specific heat
coefficient, allows the determination of the -dependence of
the pairing interaction.Comment: 5 pages, 6 figures, in press Phys. Rev.
- …