Preliminary study of the effect of the turbulent flow field around complex surfaces on their acoustic characteristics

Fundamental theories for noise generated by flow over surfaces exist for only a few simple configurations. The role of turbulence in noise generation by complex surfaces should be essentially the same as for simple configurations. Examination of simple-surface theories indicates that the spatial distributions of the mean velocity and turbulence properties are sufficient to define the noise emission. Measurements of these flow properties were made for a number of simple and complex surfaces. The configurations were selected because of their acoustic characteristics are quite different. The spatial distribution of the turbulent flow properties around the complex surfaces and approximate theory are used to locate and describe the noise sources, and to qualitatively explain the varied acoustic characteristics

Turbulence spectra in the noise source regions of the flow around complex surfaces

The complex turbulent flow around three complex surfaces was measured in detail with a hot wire. The measured data include extensive spatial surveys of the mean velocity and turbulence intensity and measurements of the turbulence spectra and scale length at many locations. The publication of the turbulence data is completed by reporting a summary of the turbulence spectra that were measured within the noise source locations of the flow. The results suggest some useful simplifications in modeling the very complex turbulent flow around complex surfaces for aeroacoustic predictive models. The turbulence spectra also show that noise data from scale models of moderate size can be accurately scaled up to full size

Tripartite entanglement from interlinked χ(2)\chi^{(2)} parametric interactions

We examine the tripartite entanglement properties of an optical system using interlinked $\chi^{(2)}$ interactions, recently studied experimentally in terms of its phase-matching properties by Bondani et al [M. Bondani, A. Allevi, E. Gevinti, A. Agliati, and A. Andreoni, arXiv:quant-ph/0604002.]. We show that the system does produce output modes which are genuinely tripartite entangled and that detection of this entanglement depends crucially on the correlation functions which are measured, with a three-mode Einstein-Podolsky-Rosen inequality being the most sensitive.Comment: 15 pages, 5 figure

Development of a second generation prototype reflectometer for reflectance measurement in space Final technical report

Prototype reflectometer development for reflection measurements in spac

Travelling waves in wound healing

We illustrate the role of travelling waves in wound healing by considering three different cases. Firstly, we review a model for surface wound healing in the cornea and focus on the speed of healing as a function of the application of growth factors. Secondly, we present a model for scar tissue formation in deep wounds and focus on the role of key chemicals in determining the quality of healing. Thirdly, we propose a model for excessive healing disorders and investigate how abnormal healing may be controlled

Efficient Synthesis of Narrowly Dispersed Brush Copolymers and Study of Their Assemblies: The Importance of Side Chain Arrangement

Efficient, one-pot preparation of synthetically challenging, high molecular weight (MW), narrowly dispersed brush block copolymers and random copolymers in high conversions was achieved by ring-opening metathesis (co)polymerization (ROMP) of various macromonomers (MMs) using the highly active, fast-initiating ruthenium olefin metathesis catalyst (H_2IMes)(pyr)_2(Cl)_2RuCHPh. A series of random and block copolymers were prepared from a pair of MMs containing polylactide (PLA) and poly(n-butyl acrylate) (PnBA) side chains at similar MWs. Their self-assembly in the melt state was studied by small-angle X-ray scattering (SAXS) and atomic force microscopy (AFM). In brush random copolymers containing approximately equal volume fractions of PLA and PnBA, the side chains segregate into lamellae with domain spacing of 14 nm as measured by SAXS, which was in good agreement with the lamellar thickness measured by AFM. The domain spacings and order−disorder transition temperatures of brush random copolymers were insensitive to the backbone length. In contrast, brush block copolymers containing approximately equal volume fractions of these MMs self-assembled into highly ordered lamellae with domain spacing over 100 nm. Their assemblies suggested that the brush block copolymer backbone adopted an extended conformation in the ordered state

Indian nurses in Italy: a qualitative study of their professional and social integration

AIMS AND OBJECTIVES: To investigate the lived subjective experiences of immigrant Indian nurses in Italy and specifically their professional and social integration. BACKGROUND: To study the worldwide, nursing flux is a health priority in the globalised world. The growth in migration trends among nurses, not only from Philippines or India, has proliferated in recent years. The research on nurses' mobility for Southern European countries is underexplored, and in Italy, the out-migration flows of Indian nurses were never analysed. DESIGN: Qualitative methodological approach. METHODS: Semi-structured interviews (n = 20) were completed with Indian clinical nurses working in Italy for more than one year mainly in private organisations. A purposive sampling technique was used for recruitment. The data were then content-analysed using an inductive method. RESULTS: The findings were categorised into four themes: (1) aspects of professional integration and working experience, (2) intra- and interprofessional relationships and perceptions of the IPASVI Regulatory Nursing Board, (3) initial nursing education and continuous professional development and (4) perceptions of social integration. CONCLUSION: The results show that for Indian nurses in Italy emigration is important to gain opportunities to expand economic and social privileges as well as escape from historical assumptions of stigma associated with nursing work, especially for women. However, these conclusions have to be seen in wider socio-cultural complexities that are at the basis of transnational fluxes (Prescott & Nichter ). RELEVANCE TO CLINICAL PRACTICE: The research offers an insight into the complicated reasons for Indian nurses out-migration to Italy. Without comprehending the interwoven textures of the political and social relations that are continually constructed and re-constructed among different nations, it is difficult to understand nurses out-migration and consequently have a better and safer collaborative teamwork in the host countries

The pros and cons of using SDL for creation of distributed services

In a competitive market for the creation of complex distributed services, time to market, development cost, maintenance and flexibility are key issues. Optimizing the development process is very much a matter of optimizing the technologies used during service creation. This paper reports on the experience gained in the Service Creation projects SCREEN and TOSCA on use of the language SDL for efficient service creation

Airloads research study. Volume 2: Airload coefficients derived from wind tunnel data

The development of B-1 aircraft rigid wind tunnel data for use in subsequent tasks of the Airloads Research Study is described. Data from the Rockwell International external structural loads data bank were used to generate coefficients of rigid airload shear, bending moment, and torsion at specific component reference stations or both symmetric and asymmetric loadings. Component stations include the movable wing, horizontal and vertical stabilizers, and forward and aft fuselages. The coefficient data cover a Mach number range from 0.7 to 2.2 for a wing sweep position of 67.5 degree

Airloads research study. Volume 1: Flight test loads acquisition

The acquisition of B-1 aircraft flight loads data for use in subsequent tasks of the Airloads Research Study is described. The basic intent is to utilize data acquired during B-1 aircraft tests, analyze these data beyond the scope of Air Force requirements, and prepare research reports that will add to the technology base for future large flexible aircraft. Flight test data obtained during the airloads survey program included condition-describing parameters, surface pressures, strain gage outputs, and loads derived from pressure and strain gauges. Descriptions of the instrumentation, data processing, and flight load survey program are included. Data from windup-turn and steady yaw maneuvers cover a Mach number range from 0.7 to 2.0 for a wing sweep position of 67.5 deg