930 research outputs found
Charge Transfer Properties Through Graphene Layers in Gas Detectors
Graphene is a single layer of carbon atoms arranged in a honeycomb lattice
with remarkable mechanical, electrical and optical properties. For the first
time graphene layers suspended on copper meshes were installed into a gas
detector equipped with a gaseous electron multiplier. Measurements of low
energy electron and ion transfer through graphene were conducted. In this paper
we describe the sample preparation for suspended graphene layers, the testing
procedures and we discuss the preliminary results followed by a prospect of
further applications.Comment: 2014 IEEE Nuclear Science Symposium and Medical Imaging Conference
with the 21st Symposium on Room-Temperature Semiconductor X-Ray and Gamma-Ray
Detectors, 4 pages, 8 figure
Fabrication of CZTSe/CIGS Nanowire Arrays by One-Step Electrodeposition for Solar-Cell Application
The paper reports some preliminary results concerning the manufacturing process of CuZnSnSe (CZTSe) and CuInGaSe (CIGS) nanowire arrays obtained by one-step electrodeposition for p-n junction fabrication. CZTSe nanowires were obtained through electrodeposition in a polycarbonate membrane by applying a rectangular pulsed current, while their morphology was optimized by appropriately setting the potential and the electrolyte composition. The electrochemical parameters, including pH and composition of the solution, were optimized to obtain a mechanically stable array of nanowires. The samples were characterized by scanning electron microscopy, Raman spectroscopy, and energy-dispersion spectroscopy. The nanostructures obtained showed a cylindrical shape with an average diameter of about 230 nm and a length of about 3 m, and were interconnected due to the morphology of the polycarbonate membrane. To create the p-n junctions, first a thin film of CZTSe was electrodeposited to avoid direct contact between the ZnS and Mo. Subsequently, an annealing process was carried out at 500 °C in a S atmosphere for 40 min. The ZnS was obtained by chemical bath deposition at 95 °C for 90 min. Finally, to complete the cell, ZnO and ZnO:Al layers were deposited by magnetron-sputtering
High-performance lead-acid batteries enabled by Pb and PbO2 nanostructured electrodes: Effect of operating temperature
Lead-acid batteries are now widely used for energy storage, as result of an established and reliable technology. In the last decade, several studies have been carried out to improve the performance of this type of batteries, with the main objective to replace the conventional plates with innovative electrodes with improved stability, increased capacity and a larger active surface. Such studies ultimately aim to improve the kinetics of electrochemical conversion reactions at the electrode-solution interface and to guarantee a good electrical continuity during the repeated charge/discharge cycles. To achieve these objectives, our contribution focuses on the employment of nanostructured electrodes. In particular, we have obtained nanostructured electrodes in Pb and PbO2 through electrosynthesis in a template consisting of a nanoporous polycarbonate membrane. These electrodes are characterized by a wider active surface area, which allows for a better use of the active material, and for a consequent increased specific energy compared to traditional batteries. In this research, the performance of lead-acid batteries with nanostructured electrodes was studied at 10 C at temperatures of 25, −20 and 40 °C in order to evaluate the efficiency and the effect of temperature on electrode morphology. The batteries were assembled using both nanostructured electrodes and an AGM-type separator used in commercial batteries
Charge Transfer Properties Through Graphene for Applications in Gaseous Detectors
Graphene is a single layer of carbon atoms arranged in a honeycomb lattice
with remarkable mechanical and electrical properties. Regarded as the thinnest
and narrowest conductive mesh, it has drastically different transmission
behaviours when bombarded with electrons and ions in vacuum. This property, if
confirmed in gas, may be a definitive solution for the ion back-flow problem in
gaseous detectors. In order to ascertain this aspect, graphene layers of
dimensions of about 2x2cm, grown on a copper substrate, are transferred
onto a flat metal surface with holes, so that the graphene layer is freely
suspended. The graphene and the support are installed into a gaseous detector
equipped with a triple Gaseous Electron Multiplier (GEM), and the transparency
properties to electrons and ions are studied in gas as a function of the
electric fields. The techniques to produce the graphene samples are described,
and we report on preliminary tests of graphene-coated GEMs.Comment: 4pages, 3figures, 13th Pisa Meeting on Advanced Detector
Information processing at the foxa node of the sea urchin endomesoderm specification network
The foxa regulatory gene is of central importance for endoderm specification across Bilateria, and this gene lies at an essential node of the well-characterized sea urchin endomesoderm gene regulatory network (GRN). Here we experimentally dissect the cis-regulatory system that controls the complex pattern of foxa expression in these embryos. Four separate cis-regulatory modules (CRMs) cooperate to control foxa expression in different spatial domains of the endomesoderm, and at different times. A detailed mutational analysis revealed the inputs to each of these cis-regulatory modules. The complex and dynamic expression of foxa is regulated by a combination of repressors, a permissive switch, and multiple activators. A mathematical kinetic model was applied to study the dynamic response of foxa cis-regulatory modules to transient inputs. This study shed light on the mesoderm–endoderm fate decision and provides a functional explanation, in terms of the genomic regulatory code, for the spatial and temporal expression of a key developmental control gene
Presenting signs and patient co-variables in Gaucher disease : outcome of the Gaucher Earlier Diagnosis Consensus (GED-C) Delphi initiative
© 2018 The Authors. Internal Medicine Journal by Wiley Publishing Asia Pty Ltd on behalf of Royal Australasian College of Physicians.Background: Gaucher disease (GD) presents with a range of signs and symptoms. Physicians can fail to recognise the early stages of GD owing to a lack of disease awareness, which can lead to significant diagnostic delays and sometimes irreversible but avoidable morbidities. Aim: The Gaucher Earlier Diagnosis Consensus (GED-C) initiative aimed to identify signs and co-variables considered most indicative of early type 1 and type 3 GD, to help non-specialists identify ‘at-risk’ patients who may benefit from diagnostic testing. Methods: An anonymous, three-round Delphi consensus process was deployed among a global panel of 22 specialists in GD (median experience 17.5 years, collectively managing almost 3000 patients). The rounds entailed data gathering, then importance ranking and establishment of consensus, using 5-point Likert scales and scoring thresholds defined a priori. Results: For type 1 disease, seven major signs (splenomegaly, thrombocytopenia, bone-related manifestations, anaemia, hyperferritinaemia, hepatomegaly and gammopathy) and two major co-variables (family history of GD and Ashkenazi-Jewish ancestry) were identified. For type 3 disease, nine major signs (splenomegaly, oculomotor disturbances, thrombocytopenia, epilepsy, anaemia, hepatomegaly, bone pain, motor disturbances and kyphosis) and one major co-variable (family history of GD) were identified. Lack of disease awareness, overlooking mild early signs and failure to consider GD as a diagnostic differential were considered major barriers to early diagnosis. Conclusion: The signs and co-variables identified in the GED-C initiative as potentially indicative of early GD will help to guide non-specialists and raise their index of suspicion in identifying patients potentially suitable for diagnostic testing for GD.Peer reviewedFinal Published versio
All talk and no action: a transcranial magnetic stimulation study of motor cortex activation during action word production
A number of researchers have proposed that the premotor and motor areas are critical for the representation of words that refer to actions, but not objects. Recent evidence against this hypothesis indicates that the left premotor cortex is more sensitive to grammatical differences than to conceptual differences between words. However, it may still be the case that other anterior motor regions are engaged in processing a word's sensorimotor features. In the present study, we used single- and paired-pulse transcranial magnetic stimulation to test the hypothesis that left primary motor cortex is activated during the retrieval of words (nouns and verbs) associated with specific actions. We found that activation in the motor cortex increased for action words compared with non-action words, but was not sensitive to the grammatical category of the word being produced. These results complement previous findings and support the notion that producing a word activates some brain regions relevant to the sensorimotor properties associated with that word regardless of its grammatical category
Behavior of a forest of NiFe nanowires in KOH and NaCl solution for water electrolysis
The present work investigates the behavior of nanostructured electrodes consisting of an array of nanowires of NiFe alloy in KOH + 0.5 M NaCl solution. The aim is to explore the possibility of using these electrodes for hydrogen production by seawater electrolysis. Seawater splitting requires a highly selective electrode on the anode side, where the evolution of molecular chlorine or the formation of other active chlorine compounds can compete with the oxygen evolution reaction. Nanostructured electrodes, obtained by template electrosynthesis, were tested at room temperature in KOH + 0.5 M NaCl solution, and the results were compared with those obtained in pure KOH. The results showed that the presence of NaCl does not affect the electrocatalytic behavior of the nanostructured NiFe alloy. Furthermore, the chemical–physical characterizations carried out after the long-term galvanostatic tests, have shown that the nanostructured electrodes are also stable in terms of morphology and composition. In addition, the solution used to perform the long-term galvanostatic tests was analyzed to investigate the possible formation of chlorine compounds. The absence of these compounds, together with the measured potential value measured for the oxygen evolution reaction, which was always lower than the thermodynamic redox potential for the hypochlorite formation reaction, leads us to conclude that these electrodes are potentially suitable for seawater electrolysis
Ternary alloys of Ni-Fe-P for alkaline electrolyzer
Renewable energy resources (solar, wind, ect) could replace fossil fuels but have the disadvantage of being intermittent. From this perspective, the role of hydrogen is crucial. It could fill the role of fuel, storage medium and energy carrier. Prominent among the various methods of hydrogen production is the water-splitting process. This process represents a clean, zero-emission way to produce hydrogen if the electricity comes from renewable sources. However, green hydrogen production by water electrolysis is not economically sustainable. Many researchers are focusing their work on developing low-cost electrode/electrocatalysts with high catalytic activity toward the water-splitting reaction. The main attention is focused on non-noble metal catalysts. In particular, transition metals-based electrocatalysts are considered one of the best options thanks to their stability in alkaline media and electrocatalytic activity. Currently, the most investigated transition metal catalysts includes sulfide, phosphide, and nitride. In addition to the type of material, electrode morphology is another important aspect. Nanostructured shapes have a very high surface area improving the electrocatalytic performance of the electrodes. In this work, a ternary alloy of Ni-Fe-P with nanowires morphology was investigated.
The synergistic effect between the three elements ensures a very high electrocatalytic activity.
Electrodes were obtained by template electrosynthesis which is a simple, cheap and scalable method.
Electrodes morphology was studied by scanning electrode microscopy (SEM). Energy dipersive spectroscopy (EDS) confirmed the presence of three elements. Electrodes were tested both as cathodes and anodes by Cyclic Voltammetry (CV), Quasi Steady State Polarization (QSSP) and Galvanostatic Test. All the tests were performed in 30% w/w KOH aqueous solution and at room temperature. The obtained results were compared with those obtained in our previous work relative to the behavior of binary alloy of Ni-Fe NWs. Preliminary results show a better performance of the ternary alloy than binary ones
- …