Dual augmentation for aerobic bioremediation of MTBE and TCE pollution in heavy metal-contaminated soil

In this work we isolated from soil and characterized several bacterial strains capable of either resisting high concentrations of heavy metals (Cd2+ or Hg2+ or Pb2+) or degrading the common soil and groundwater pollutants MTBE (methyl-tertbutyl ether) or TCE (trichloroethylene). We then used soil microcosms exposed to MTBE (50 mg/l) or TCE (50 mg/l) in the presence of one heavy metal (Cd 10 ppm or Hg 5 ppm or Pb 50 or 100 ppm) and two bacterial isolates at a time, a degrader plus a metalresistant strain. Some of these two-membered consortia showed degradation efficiencies well higher (49–182% higher) than those expected under the conditions employed, demonstrating the occurrence of a synergetic relationship between the strains used. Our results show the efficacy of the dual augmentation strategy for MTBE and TCE bioremediation in the presence of heavy metals

Chromatographic techniques for the determination of free phenol in foundry resins

Phenol is a toxic compound present in a wide variety of foundry resins. Its quantification is important for the characterization of the resins as well as for the evaluation of free contaminants present in foundry wastes. Two chromatographic methods, liquid chromatography with ultraviolet detection (LC-UV) and gas chromatography with flame ionization detection (GC-FID), for the analysis of free phenol in several foundry resins, after a simple extraction procedure (30 min), were developed. Both chromatographic methods were suitable for the determination of phenol in the studied furanic and phenolic resins, showing good selectivity, accuracy (recovery 99–100%; relative deviations <5%), and precision (coefficients of variation <6%). The used ASTM reference method was only found to be useful in the analysis of phenolic resins, while the LC and GC methods were applicable for all the studied resins. The developed methods reduce the time of analysis from 3.5 hours to about 30 min and can readily be used in routine quality control laboratories

Benzene biodegradability tests on a residual granitic soil

Benzene is a component of most fuels and an important industrial solvent. It is widely spread in soils, sediments and groundwater near diesel/gasoline service stations, refineries and in other industrial areas. For benzene, as other BTEXs, the most used in-situ remediation technology is Soil Vapour Extraction followed by bioremediation. In the present work, a bacterial consortium was developed for the systematic study of the benzene bioremediation of soils contaminated. The effectiveness of biodegradation was studied in a residual granitic soil. The developed microorganism consortium was collected from a protection area of crude storage tanks in a refinery. Our results showed that the developed consortium was efficient in degrading benzene (about 18 days for soil remediation contaminated with 140 mg of benzene per kg of residual granitic soil in lab-scale studies)

Mineral Composition of Subcritical Water Extracts of Saccorhiza Polyschides, a Brown Seaweed Used as Fertilizer in the North of Portugal

The present work aimed at studying Saccorhiza polyschides extracts obtained by subcritical water extraction as a potential source of essential macro and trace elements, aiming for its potential application as a biofertilizer. The mineral composition, as well as sulfate, chlorine and iodine, total organic matter, and total nitrogen content, were determined on the extracts obtained from seaweeds harvested during low tide at the northern Portuguese coast. The selected parameters are important for a biofertilizer. Among the macronutrients, the most abundant was K (15.7 ± 0.2 g/L), followed by Na (5.46 ± 0.11 g/L), S (1.52 ± 0.06 g/L), Ca (1.09 ± 0.11 g/L), and Mg (1.02 ± 0.08 g/L). Several important micronutrients (Zn, B, Cl, P, Mo, V, Se, and I) have also been found in the extracts. The total organic matter was 34.1 ± 0.3 g/L. The extracts present low levels of toxic compounds such as Ni, Cd, and Pb. Considering the composition of the obtained extracts, these can find application in the development of fertilization products. The composition of subcritical water extracts of S. polyschides suggests that they may have important characteristics as a biofertilizer and can be an option in biofortification experiments with essential nutrients. The method can be easily scaled up which makes it attractive for agricultural applications.info:eu-repo/semantics/publishedVersio

Determination of free furfuryl alcohol in foundry resins by chromatographic techniques

Two chromatographic methods, gas chromatography with flow ionization detection (GC–FID) and liquid chromatography with ultraviolet detection (LC–UV), were used to determine furfuryl alcohol in several kinds of foundry resins, after application of an optimised extraction procedure. The GC method developed gave feasibility that did not depend on resin kind. Analysis by LC was suitable just for furanic resins. The presence of interference in the phenolic resins did not allow an appropriate quantification by LC. Both methods gave accurate and precise results. Recoveries were >94%; relative standard deviations were ≤7 and ≤0.3%, respectively for GC and LC methods. Good relative deviations between the two methods were found (≤3%)

Determination of free formaldehyde in foundry resins as its 2,4-dinitrophenylhydrazone by liquid chromatography

Formaldehyde is a toxic component that is present in foundry resins. Its quantification is important to the characterisation of the resin (kind and degradation) as well as for the evaluation of free contaminants present in wastes generated by the foundry industry. The complexity of the matrices considered suggests the need for separative techniques. The method developed for the identification and quantification of formaldehyde in foundry resins is based on the determination of free carbonyl compounds by derivatization with 2,4-dinitrophenylhydrazine (DNPH), being adapted to the considered matrices using liquid chromatography (LC) with UV detection. Formaldehyde determinations in several foundry resins gave precise results. Mean recovery and R.S.D. were, respectively, >95 and 5%. Analyses by the hydroxylamine reference method gave comparable results. Results showed that hydroxylamine reference method is applicable just for a specific kind of resin, while the developed method has good performance for all studied resins

Determination of ochratoxin A in bread: evaluation of microwave-assisted extraction using an orthogonal composite design coupled with response surface methodology

An analytical method using microwave-assisted extraction (MAE) and liquid chromatography (LC) with fluorescence detection (FD) for the determination of ochratoxin A (OTA) in bread samples is described. A 24 orthogonal composite design coupled with response surface methodology was used to study the influence of MAE parameters (extraction time, temperature, solvent volume, and stirring speed) in order to maximize OTA recovery. The optimized MAE conditions were the following: 25 mL of acetonitrile, 10 min of extraction, at 80 °C, and maximum stirring speed. Validation of the overall methodology was performed by spiking assays at five levels (0.1–3.00 ng/g). The quantification limit was 0.005 ng/g. The established method was then applied to 64 bread samples (wheat, maize, and wheat/maize bread) collected in Oporto region (Northern Portugal). OTAwas detected in 84 % of the samples with a maximum value of 2.87 ng/g below the European maximum limit established for OTA in cereal products of 3 ng/g

Bioactive lipids of seaweeds from the Portuguese north coast: health benefits versus potential contamination

The total lipid content and lipidic profile of seaweeds harvested in the North Coast and purchased in Portugal were determined in this paper. The amount of total lipids in the different species of seaweeds varied between 0.7 ± 0.1% (Chondrus crispus) and 3.8 ± 0.6% (Ulva spp.). Regarding the fatty acid content, polyunsaturated fatty acids (PUFA) ranged between 0–35%, with Ulva spp. presenting the highest amount; monounsaturated fatty acids (MUFA) varied between 19 and 67%; and saturated fatty acids (SFA) were predominant in C. crispus (45–78%) and Gracilaria spp. (36–79%). Concerning the nutritional indices, the atherogenicity index (AI) was between 0.4–3.2, the thrombogenicity index (TI) ranged from 0.04 to 1.95, except for Gracilaria spp., which had a TI of 7.6, and the hypocholesterolemic/hypercholesterolemic ratio (HH) values ranged between 0.88–4.21, except for Gracilaria spp., which exhibited values between 0.22–9.26. The n6/n3 ratio was below 1 for most of the species evaluated, except for Ascophyllum nodosum, which presented a higher value, although below 2. Considering the PUFA/SFA ratio, seaweeds presented values between 0.11–1.02. The polycyclic aromatic hydrocarbons (PAHs) and aliphatic hydrocarbons (AHCs) contamination of seaweeds under study was also quantified, the values found being much lower than the maximum levels recommended for foodstuff.info:eu-repo/semantics/publishedVersio

Targeting specific nutrient deficiencies in proteinrestricted diets: some practical facts in PKU dietary management

Among aminoacidopathies, phenylketonuria (PKU) is the most prevalent one. Early diagnosis in the neonatal period with a prompt nutritional therapy (low natural-protein and phenylalanine diet, supplemented with phenylalanine-free amino acid mixtures and special low-protein foods) remains the mainstay of the treatment. Data considering nutrient contents of cooked dishes is lacking. In this study, fourteen dishes specifically prepared for PKU individuals were analysed, regarding the lipid profile and iron and zinc contents. These dishes are poor sources of essential nutrients like Fe, Zn or n-3 fatty acids, reinforcing the need for adequate supplementation to cover individual patients’ needs. This study can contribute to a more accurate adjustment of PKU diets and supplementation in order to prevent eventual nutritional deficiencies. This study contributes to a better understanding of nutrient intake from PKU patients’ meals, showing the need for dietary supplementation

Seaweeds from the Portuguese coast as a source of proteinaceous material: Total and free amino acid composition profile

The total protein content and the (total and free) amino acid composition of nine edible species of red, brown and green seaweeds collected in the Portuguese North-Central coast were quantified to assess their potential contribution to the recommended dietary intake. Whenever possible, the protein and amino acid composition was compared with that of commercial European seaweeds. The protein content was the highest (P < 0.05) in red species (19.1-28.2 g/100 g dw), followed by the green seaweed Ulva spp. (20.5-23.3 g/100 g dw), with the lowest content found in brown seaweeds (6.90-19.5 g/100 g dw). Brown seaweeds presented the lowest mean contents of essential amino acids (EAAs) (41.0% protein) but significantly (P < 0.05) higher concentrations of non-essential amino acids (36.1% protein) and free amino acids (6.47-24.0% protein). Tryptophan, methionine and leucine were the limiting EAAs in all species. In contrast, lysine was found in high concentrations, especially in red (2.71-3.85% protein) and green (2.84-4.24% protein) seaweeds.info:eu-repo/semantics/publishedVersio