7 research outputs found
New insights into polymer mediated formation of anatase mesocrystals
The reaction between (NH4)2TiF6 and H3BO3 in the presence of varying quantities of PEG-6000 was used to form NH4TiOF3 mesocrystals (MCs). The amount of PEG-6000, employed as a template, is crucial to the formation of defect free, non-agglomerated NH4TiOF3 MCs; high concentrations lead to MC agglomeration, lower ones result in centralized defects. This polymer-mediated formation process may be understood using an analogy with known polymerization reactions. The oxofluorotitanate MCs readily undergo a thermal topotactic transformation to give anatase MCs with photocatalytic activity. The TiO2 MCs are porous, with highly orientated lamellar crystallites that form part of the larger mesocrystal structure
Fabrication of epitaxial W-doped VO<sub>2</sub> nanostructured films for terahertz modulation using the solvothermal process
Nanowhiskers of K2Ti6O13 as a promoter of photocatalysis in anatase mesocrystals
Here we describe the development of a new mesocrytalline anatase-based photocatalyst with an activity nearly double that of the commercial Evonik Aeroxide® TiO2 P25 catalyst. An extensive characterization of this new catalytic material with XRD, TEM, SAED, EELS, SEM, RAMAN and XPS shows that its activity is promoted by its hybrid structure comprising mesocrystalline anatase and K2Ti6O13 whiskers formed within the TiO2 mesocrystals. This new and unexpected component is formed in situ within the TiO2 mesocrystalline framework at a surprisingly low temperature of 500 °C as a result of potassium diffusion from polymer-matrix phase. The growth of whiskers occurs at the 001 TiO2 planes of mesocrystals and their sizes attain 60 nm in a section and a few μm in length
Corrigendum: The effect of azoximer bromide (Polyoxidonium®) in patients hospitalized with coronavirus disease (COVID-19): an open-label, multicentre, interventional clinical study
The authors wish to make the following corrections to their article:
Efimov SV, Matsiyeuskaya NV, Boytsova OV, et al. Corrigendum: The effect of azoximer bromide (Polyoxidonium®) in patients hospitalized with coronavirus disease (COVID-19): an open-label, multicentre, interventional clinical study. Drugs in Context 2021; 10: 2021-11-1. DOI: 10.7573/dic.2020-11-
Powder Synthesized from Aqueous Solution of Calcium Nitrate and Mixed-Anionic Solution of Orthophosphate and Silicate Anions for Bioceramics Production
Synthesis from mixed-anionic aqueous solutions is a novel approach to obtain active powders for bioceramics production in the CaO-SiO2-P2O5-Na2O system. In this work, powders were prepared using precipitation from aqueous solutions of the following precursors: Ca(NO3)2 and Na2HPO4 (CaP); Ca(NO3)2 and Na2SiO3 (CaSi); and Ca(NO3)2, Na2HPO4 and Na2SiO3 (CaPSi). Phase composition of the CaP powder included brushite CaHPO4‧2H2O and the CaSi powder included calcium silicate hydrate. Phase composition of the CaPSi powder consisted of the amorphous phase (presumably containing hydrated quasi-amorphous calcium phosphate and calcium silicate phase). All synthesized powders contained NaNO3 as a by-product. The total weight loss after heating up to 1000 °C for the CaP sample—28.3%, for the CaSi sample—38.8% and for the CaPSi sample was 29%. Phase composition of the ceramic samples after the heat treatment at 1000 °C based on the CaP powder contained β-NaCaPO4 and β-Ca2P2O7, the ceramic samples based on the CaSi powder contained α-CaSiO3 and Na2Ca2Si2O7, while the ceramics obtained from the CaPSi powder contained sodium rhenanite β-NaCaPO4, wollastonite α-CaSiO3 and Na3Ca6(PO4)5. The densest ceramic sample was obtained in CaO-SiO2-P2O5-Na2O system at 900 °C from the CaP powder (ρ = 2.53 g/cm3), while the other samples had densities of 0.93 g/cm3 (CaSi) and 1.22 (CaPSi) at the same temperature. The ceramics prepared in this system contain biocompatible and bioresorbable phases, and can be recommended for use in medicine for bone-defect treatment
Powder Synthesized from Aqueous Solution of Calcium Nitrate and Mixed-Anionic Solution of Orthophosphate and Silicate Anions for Bioceramics Production
Synthesis from mixed-anionic aqueous solutions is a novel approach to obtain active powders for bioceramics production in the CaO-SiO2-P2O5-Na2O system. In this work, powders were prepared using precipitation from aqueous solutions of the following precursors: Ca(NO3)2 and Na2HPO4 (CaP); Ca(NO3)2 and Na2SiO3 (CaSi); and Ca(NO3)2, Na2HPO4 and Na2SiO3 (CaPSi). Phase composition of the CaP powder included brushite CaHPO4‧2H2O and the CaSi powder included calcium silicate hydrate. Phase composition of the CaPSi powder consisted of the amorphous phase (presumably containing hydrated quasi-amorphous calcium phosphate and calcium silicate phase). All synthesized powders contained NaNO3 as a by-product. The total weight loss after heating up to 1000 °C for the CaP sample—28.3%, for the CaSi sample—38.8% and for the CaPSi sample was 29%. Phase composition of the ceramic samples after the heat treatment at 1000 °C based on the CaP powder contained β-NaCaPO4 and β-Ca2P2O7, the ceramic samples based on the CaSi powder contained α-CaSiO3 and Na2Ca2Si2O7, while the ceramics obtained from the CaPSi powder contained sodium rhenanite β-NaCaPO4, wollastonite α-CaSiO3 and Na3Ca6(PO4)5. The densest ceramic sample was obtained in CaO-SiO2-P2O5-Na2O system at 900 °C from the CaP powder (ρ = 2.53 g/cm3), while the other samples had densities of 0.93 g/cm3 (CaSi) and 1.22 (CaPSi) at the same temperature. The ceramics prepared in this system contain biocompatible and bioresorbable phases, and can be recommended for use in medicine for bone-defect treatment
New insights into polymer mediated formation of anatase mesocrystals
The reaction between (NH4)2TiF6 and H3BO3 in the presence of varying quantities of PEG-6000 was used to form NH4TiOF3 mesocrystals (MCs). The amount of PEG-6000, employed as a template, is crucial to the formation of defect free, non-agglomerated NH4TiOF3 MCs; high concentrations lead to MC agglomeration, lower ones result in centralized defects. This polymer-mediated formation process may be understood using an analogy with known polymerization reactions. The oxofluorotitanate MCs readily undergo a thermal topotactic transformation to give anatase MCs with photocatalytic activity. The TiO2 MCs are porous, with highly orientated lamellar crystallites that form part of the larger mesocrystal structure