A SURVEY OF RICE PRODUCTION AND PROCESSING IN SOUTH EAST NIGERIA

An assessment of rice production and processing in South-Eastern Nigeria was carried out by investigative survey approach.  The survey was basically to ascertain the extent of mechanization applicable in the area to enable the agricultural policy makers device the modalities for improving rice production and processing in the area.  According to the results obtained from the study, the planting period of rice in the area was mostly between May and August.  Virtually 77% of the farmers raise the rice seedlings in the nursery bed before transplanting to the permanent seed bed while 23% sow the seeds directly to the seed bed where they germinate and grow to maturity.  Results revealed that 75% of the farmers in the South-Eastern Nigeria use manual labour in the seed bed preparation while 25% use tractors. It was observable from the results that 15-15-15 NPK and urea fertilizers were predominantly used by the farmers in the area for rice production and the application method was mostly by manual broad casting over the planted area. Results also recorded that rice harvesting mostly took place from October – December; and about 69% of the farmers harvest their rice manually while 31% use mechanical means. More so, average of 49.6% of the farmers thresh their harvested rice manually while 50.4% of them use mechanized means. It was also observed that 93% of the farmers use both steam heating and total drenching method in parboiling the paddy rice while 3.4% and 3.6% use steam heating and total drenching respectively in parboiling the paddy rice. The milling method applicable in the area was mainly by mechanical means with 73.6% of the farmers who use the method while 10.4% of the farmers use manual method.  The farmers generally use sacks in bagging and/or storing both the paddy and milled rice. Finally results showed that mechanization of rice production and processing has not received much attention as most of the farmers still use manual labour and traditional approach in the production and processing of rice. http://dx.doi.org/10.4314/njt.v36i1.2

Physico-chemical conditions and distribution of phytoplankton in the Brass River, Nigeria

The physiology, physico-chemical conditions and distribution of phytoplankton in the Brass River, Nigeria has been assessed. The data on physico-chemical conditions revealed a near constant water surface conditions for all the stations sampled. The relative abundance of phytoplankton population of the Brass River system revealed the presence of the following marine phytoplankton families Bacillariophyceae (Bidulphia auria, M. mobiliencesis, B. sinsensis, Skeletonema costatum), Chlorophyceae (Halosphaera ividis), and Dinophyceae (Ceeratium sectum). Journal of Applied Sciences and Environmental Management Vol. 10(1) 2006: 43-4

Estimating the malaria risk of African mosquito movement by air travel

BACKGROUND: The expansion of global travel has resulted in the importation of African Anopheles mosquitoes, giving rise to cases of local malaria transmission. Here, cases of 'airport malaria' are used to quantify, using a combination of global climate and air traffic volume, where and when are the greatest risks of a Plasmodium falciparum-carrying mosquito being importated by air. This prioritises areas at risk of further airport malaria and possible importation or reemergence of the disease. METHODS: Monthly data on climate at the World's major airports were combined with air traffic information and African malaria seasonality maps to identify, month-by-month, those existing and future air routes at greatest risk of African malaria-carrying mosquito importation and temporary establishment. RESULTS: The location and timing of recorded airport malaria cases proved predictable using a combination of climate and air traffic data. Extending the analysis beyond the current air network architecture enabled identification of the airports and months with greatest climatic similarity to P. falciparum endemic regions of Africa within their principal transmission seasons, and therefore at risk should new aviation routes become operational. CONCLUSION: With the growth of long haul air travel from Africa, the identification of the seasonality and routes of mosquito importation is important in guiding effective aircraft disinsection and vector control. The recent and continued addition of air routes from Africa to more climatically similar regions than Europe will increase movement risks. The approach outlined here is capable of identifying when and where these risks are greatest

Global diversity and antimicrobial resistance of typhoid fever pathogens: Insights from a meta-analysis of 13,000 Salmonella Typhi genomes

Background: The Global Typhoid Genomics Consortium was established to bring together the typhoid research community to aggregate and analyse Salmonella enterica serovar Typhi (Typhi) genomic data to inform public health action. This analysis, which marks 22 years since the publication of the first Typhi genome, represents the largest Typhi genome sequence collection to date (n=13,000). Methods: This is a meta-analysis of global genotype and antimicrobial resistance (AMR) determinants extracted from previously sequenced genome data and analysed using consistent methods implemented in open analysis platforms GenoTyphi and Pathogenwatch. Results: Compared with previous global snapshots, the data highlight that genotype 4.3.1 (H58) has not spread beyond Asia and Eastern/Southern Africa; in other regions, distinct genotypes dominate and have independently evolved AMR. Data gaps remain in many parts of the world, and we show the potential of travel-associated sequences to provide informal ‘sentinel’ surveillance for such locations. The data indicate that ciprofloxacin non-susceptibility (>1 resistance determinant) is widespread across geographies and genotypes, with high-level ciprofloxacin resistance (=3 determinants) reaching 20% prevalence in South Asia. Extensively drug-resistant (XDR) typhoid has becomedominant in Pakistan (70% in 2020) but has not yet become established elsewhere. Ceftriaxone resistance has emerged in eight non-XDR genotypes, including a ciprofloxacin-resistant lineage (4.3.1.2.1) in India. Azithromycin resistance mutations were detected at low prevalence in South Asia, including in two common ciprofloxacin-resistant genotypes. Conclusions: The consortium’s aim is to encourage continued data sharing and collaboration to monitor the emergence and global spread of AMR Typhi, and to inform decision-making around the introduction of typhoid conjugate vaccines (TCVs) and other prevention and control strategies

Global age-sex-specific mortality, life expectancy, and population estimates in 204 countries and territories and 811 subnational locations, 1950–2021, and the impact of the COVID-19 pandemic: a comprehensive demographic analysis for the Global Burden of Disease Study 2021

Background Estimates of demographic metrics are crucial to assess levels and trends of population health outcomes. The profound impact of the COVID-19 pandemic on populations worldwide has underscored the need for timely estimates to understand this unprecedented event within the context of long-term population health trends. The Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2021 provides new demographic estimates for 204 countries and territories and 811 additional subnational locations from 1950 to 2021, with a particular emphasis on changes in mortality and life expectancy that occurred during the 2020–21 COVID-19 pandemic period. Methods 22 223 data sources from vital registration, sample registration, surveys, censuses, and other sources were used to estimate mortality, with a subset of these sources used exclusively to estimate excess mortality due to the COVID-19 pandemic. 2026 data sources were used for population estimation. Additional sources were used to estimate migration; the effects of the HIV epidemic; and demographic discontinuities due to conflicts, famines, natural disasters, and pandemics, which are used as inputs for estimating mortality and population. Spatiotemporal Gaussian process regression (ST-GPR) was used to generate under-5 mortality rates, which synthesised 30 763 location-years of vital registration and sample registration data, 1365 surveys and censuses, and 80 other sources. ST-GPR was also used to estimate adult mortality (between ages 15 and 59 years) based on information from 31 642 location-years of vital registration and sample registration data, 355 surveys and censuses, and 24 other sources. Estimates of child and adult mortality rates were then used to generate life tables with a relational model life table system. For countries with large HIV epidemics, life tables were adjusted using independent estimates of HIV-specific mortality generated via an epidemiological analysis of HIV prevalence surveys, antenatal clinic serosurveillance, and other data sources. Excess mortality due to the COVID-19 pandemic in 2020 and 2021 was determined by subtracting observed all-cause mortality (adjusted for late registration and mortality anomalies) from the mortality expected in the absence of the pandemic. Expected mortality was calculated based on historical trends using an ensemble of models. In location-years where all-cause mortality data were unavailable, we estimated excess mortality rates using a regression model with covariates pertaining to the pandemic. Population size was computed using a Bayesian hierarchical cohort component model. Life expectancy was calculated using age-specific mortality rates and standard demographic methods. Uncertainty intervals (UIs) were calculated for every metric using the 25th and 975th ordered values from a 1000-draw posterior distribution. Findings Global all-cause mortality followed two distinct patterns over the study period: age-standardised mortality rates declined between 1950 and 2019 (a 62·8% [95% UI 60·5–65·1] decline), and increased during the COVID-19 pandemic period (2020–21; 5·1% [0·9–9·6] increase). In contrast with the overall reverse in mortality trends during the pandemic period, child mortality continued to decline, with 4·66 million (3·98–5·50) global deaths in children younger than 5 years in 2021 compared with 5·21 million (4·50–6·01) in 2019. An estimated 131 million (126–137) people died globally from all causes in 2020 and 2021 combined, of which 15·9 million (14·7–17·2) were due to the COVID-19 pandemic (measured by excess mortality, which includes deaths directly due to SARS-CoV-2 infection and those indirectly due to other social, economic, or behavioural changes associated with the pandemic). Excess mortality rates exceeded 150 deaths per 100 000 population during at least one year of the pandemic in 80 countries and territories, whereas 20 nations had a negative excess mortality rate in 2020 or 2021, indicating that all-cause mortality in these countries was lower during the pandemic than expected based on historical trends. Between 1950 and 2021, global life expectancy at birth increased by 22·7 years (20·8–24·8), from 49·0 years (46·7–51·3) to 71·7 years (70·9–72·5). Global life expectancy at birth declined by 1·6 years (1·0–2·2) between 2019 and 2021, reversing historical trends. An increase in life expectancy was only observed in 32 (15·7%) of 204 countries and territories between 2019 and 2021. The global population reached 7·89 billion (7·67–8·13) people in 2021, by which time 56 of 204 countries and territories had peaked and subsequently populations have declined. The largest proportion of population growth between 2020 and 2021 was in sub-Saharan Africa (39·5% [28·4–52·7]) and south Asia (26·3% [9·0–44·7]). From 2000 to 2021, the ratio of the population aged 65 years and older to the population aged younger than 15 years increased in 188 (92·2%) of 204 nations. Interpretation Global adult mortality rates markedly increased during the COVID-19 pandemic in 2020 and 2021, reversing past decreasing trends, while child mortality rates continued to decline, albeit more slowly than in earlier years. Although COVID-19 had a substantial impact on many demographic indicators during the first 2 years of the pandemic, overall global health progress over the 72 years evaluated has been profound, with considerable improvements in mortality and life expectancy. Additionally, we observed a deceleration of global population growth since 2017, despite steady or increasing growth in lower-income countries, combined with a continued global shift of population age structures towards older ages. These demographic changes will likely present future challenges to health systems, economies, and societies. The comprehensive demographic estimates reported here will enable researchers, policy makers, health practitioners, and other key stakeholders to better understand and address the profound changes that have occurred in the global health landscape following the first 2 years of the COVID-19 pandemic, and longer-term trends beyond the pandemic

The effects of different casting techniques on the hardness, energy absorbance and impact strength of sand-cast Pb-Sb-Cu alloys

The effect of casting technique on the impact strength, energy absorbance and hardness of sand cast Pb-Sb-Cu alloys was studied following casting of the alloys using three techniques. Cooling of the alloys after casting was carried out in water, air and furnace in order to vary the micro-structure of the alloys produced. Copper addition to the base alloy was by dispersion of the Cu powder within the Pb-Sb matrix using the three casting techniques. The results showed that Technique A, which involved simultaneous addition of Cu powder and pouring of the molten Pb-Sb into the mould conferred higher impact strength and better energy absorbance on the Pb-Sb-Cu alloys produced, compared to alloys from Techniques B (involving addition of Cu powder intermittently as pouring of Pb-Sb into the mould was going on) and C (involving pouring a stirred mixture of heated Pb-Sb alloy and powdered Cu into the mould). Hardness of the Pb-Sb-Cu alloys was independent of the casting techniques used, but highly dependent on the cooling rate imposed by the cooling medium. Irrespective of the casting technique used, cooling the Pb-Sb-Cu alloys in water conferred higher hardness on the alloys, while higher impact strength and energy absorbance were conferred on the alloys following furnace cooling. Increased Cu addition (up to a maximum of 8.26%) to the Pb-Sb alloy increased correspondingly the impact strength, energy absorbance and hardness of Pb-Sb-Cu alloys so produced.Keywords: Casting technique, sand casting, Pb-Sb-Cu alloy, copper powderInternational Journal of Natural and Applied Sciences, 5(3): 195-202, 200

Review of Palm Kernel Oil Processing And Storage Techniques In South East Nigeria

An assessment of palm kernel processing and storage in South-Eastern Nigeria was carried out by investigative survey approach. The survey basically ascertained the extent of mechanization applicable in the area to enable the palm kernel processors and agricultural policy makers, device the modalities for improving palm kernel processing in the area. According to the results obtained from the study, in Abia state, 85% of the respondents use mechanical method while 15% use manual method in cracking their kernels. In Imo state, 83% of the processors use mechanical method while 17% use manual method. In Enugu and Ebonyi state, 70% and 50% of the processors respectively use mechanical method. It is only in Anambra state that greater number of the processors (50%) use manual method while 45% use mechanical means. It is observable from the results that palm kernel oil extraction has not received much attention in mechanization. The ANOVA of the palm kernel oil extraction technique in South- East Nigeria showed significant difference in both the study area and oil extraction techniques at 5% level of probability. Results further revealed that in Abia State, 70% of the processors use complete fractional process in refining the palm kernel oil; 25% and 5% respectively use incomplete fractional process and zero refining process. In Anambra, 60% of the processors use complete fractional process and 40% use incomplete fractional process. Zero refining method is not applicable in Anambra state. In Enugu sate, 53% use complete fractional process while 25% and 22% respectively use zero refining and incomplete fractional process in refining the palm kernel oil. Imo state, mostly use complete fractional process (85%) in refining palm kernel oil. About 10% use zero refining method while 5% of the processors use incomplete fractional process. Plastic containers and metal drums are dominantly used in most areas in south-east Nigeria for the storage of palm kernel oil

Phytochemical and proximate assays of cyperus esculentus Linn, (Tigger nut)

No Abstract