Nitridogermanate Nitrides Sr7[GeN4]N2 and Ca7[GeN4]N2

The alkaline earth nitridogermanate nitrides AE7[GeN4]N2 (AE = Ca, Sr) have been synthesized using a Na flux technique in sealed Ta tubes. According to single-crystal X-ray diffraction the isotypic compounds crystallize in space group Pbcn (No. 60) with Z = 4, (Sr7[GeN4]N2: a = 1152.6(2), b = 658.66(13), c = 1383.6(3) pm, V = 1050.5(4) × 106 pm3, R1 = 0.049; Ca7[GeN4]N2: a = 1082.6(2), b = 619.40(12), c = 1312.1(3) pm, V = 879.8(3) × 106 pm3, R1 = 0.016). Owing to the high N/Ge ratio, the compounds contain discrete N3− ions coordinated by six AE2+ besides discrete [GeN4]8− tetrahedrons. One of the AE2+ ion is coordinated by only four N3− ions, which is rather an unusual low coordination number for Sr2+. Together with the isolated [GeN4]8− tetrahedrons, these Sr2+ ions form chains of alternating cation centered edge sharing tetrahedrons. The electronic structure and chemical bonding in Sr7[GeN4]N2 has been analyzed employing linear muffin-tin orbital (LMTO) band structure calculations

Color Point Tuning for (Sr,Ca,Ba) Si2O2N2:Eu2+ for White Light LEDs

Color point tuning is an important challenge for improving white light LEDs. In this paper, the possibilities of color tuning with the efficient LED phosphor Sr1−x−y−zCaxBaySi2O2N2:Euz2+ (0 ≤ x, y ≤ 1; 0.005 ≤ z ≤ 0.16) are investigated. The emission color can be tuned in two ways: by changing Eu2+ concentration and by substitution of the host lattice cation Sr2+ by either Ca2+ or Ba2+. The variation in the Eu2+ concentration shows a red shift of the emission upon increasing the Eu concentration above 2%. The red shift is explained by energy migration and energy transfer to Eu2+ ions emitting at longer wavelengths. Along with this (desired) red shift there is an (undesired) lowering of the quantum efficiency and the thermal quenching temperature due to concentration quenching. Partial substitution of Sr2+ by either Ca2+ or Ba2+ also results in a red-shifted Eu2+ emission. For Ca2+ this is expected and the red shift is explained by an increased crystal field splitting for Eu2+ on the (smaller) Ca2+ cation site. For Ba2+, the red shift is surprising. Often, a blue shift of the fd emission is observed in case of substitution of Sr2+ by the larger Ba2+ cation. The Eu2+ emission in the pure BaSi2O2N2 host lattice is indeed blue-shifted. Temperature dependent luminescence measurements show that the quenching temperature drops upon substitution of Sr by Ca, whereas for Ba substitution, the quenching temperature remains high. Color tuning by partial substitution of Sr2+ by Ba2+ is therefore the most promising way to shift the color point of LEDs while retaining the high quantum yield and high luminescence quenching temperature

Synthesis, Structure, and Dynamics of Tris(η5-cyclopentadienyl)lanthanides and Bis(η5-cyclopentadienyl)[bis(trimethylsilyl)amido]cerium(III)

The crystal structures of tris(η5-cyclopentadienyl)lanthanides (Ln = Ce, Dy, Ho) have been determined using different X-ray diffraction methods. Cp3Ce and Cp3Ho (Cp = cyclopentadienyl) crystal data needed special solution and refinement methods, due to the occurrence of intrinsic twinning in these species. Our results do not agree with the previously published cell constants of Cp3Ho. The space group and unit cell parameters of Cp3Dy have been derived from powder diffraction experiments. High-resolution 13C solid-state NMR data of Cp3La are presented, giving evidence of the dynamics and bonding situation of the Cp ligands. Cp3Ce turned out to be a reactive reagent for the synthesis of bis(η5-cyclopentadienyl)[bis(trimethylsilyl)amido]cerium(III)

From metastable to stable modifications-in situ Laue diffraction investigation of diffusion processes during the phase transitions of (GeTe)(n)Sb2Te3 (6 < n < 15) crystals.

Temperature dependent phase transitions of compounds (GeTe)nSb2Te3 (n = 6, 12, 15) have been investigated by in situ microfocus Laue diffraction. Diffusion processes involving cation defect ordering at B300 8C lead to different nanostructures which are correlated to changes of the thermoelectric characteristics

Alveolar microstrain and the dark side of the lung

Mechanical ventilation associated lung injury (VALI) negatively impacts the outcomes of critically ill patients. Research during the past two decades has led to a better understanding of key physiologic mechanisms of injury, yet uncertainty over the topographical distribution of these mechanisms continues to fuel controversies over "best ventilation practice" in injured lungs. In this issue Pavone and colleagues have explored the temporal and spatial evolution of VALI in an elegant use of intravital microscopy. Their findings reinforce the notion that regions which receive most of the inspired gas, in Pavone's case the non-dependent lung of a rat supported in the lateral decubitus posture, are particularly susceptible to injury. However, the inability to measure tissue strain remote from the pleura keeps important questions about small scale intra-acinar stress and strain distributions unanswered

Unprecedented Zeolite-Like Framework Topology Constructed from Cages with 3-Rings in a Barium Oxonitridophosphate

A novel oxonitridophosphate, Ba19P36O6+xN66-xCl8+x(x≈4.54), has been synthesized by heating a multicomponent reactant mixture consisting of phosphoryl triamide OP(NH2)3, thiophosphoryl triamide SP(NH2)3, BaS, and NH4Cl enclosed in an evacuated and sealed silica glass ampule up to 750°C. Despite the presence of side phases, the crystal structure was elucidated ab initio from high-resolution synchrotron powder diffraction data (λ=39.998 pm) applying the charge flipping algorithm supported by independent symmetry information derived from electron diffraction (ED) and scanning transmission electron microscopy (STEM). The compound crystallizes in the cubic space group Fm3c (no. 226) with a = 2685.41(3) pm and Z = 8. As confirmed by Rietveld refinement, the structure comprises all-side vertex sharing P(O,N)4 tetrahedra forming slightly distorted 3846812 cages representing a novel composite building unit (CBU). Interlinked through their 4-rings and additional 3-rings, the cages build up a 3D network with a framework density FD = 14.87 T/1000 Å3 and a 3D 8-ring channel system. Ba2+ and Clˉ as extra-framework ions are located within the cages and channels of the framework. The structuralmodel is corroborated by 31P double-quantum(DQ) /single-quantum (SQ) and triple-quantum (TQ) /single-quantum (SQ) 2D correlation MAS NMR spectroscopy. According to 31P{1H} C-REDOR NMR measurements, the H content is less than one H atom per unit cell

Ba2AlSi5N9

Ba2AlSi5N9 was synthesized starting from Si3N4, AlN, and Ba in a radio-frequency furnace at temperatures of about 1725°C. The new nitridoalumosilicate crystallizes in the triclinic space group P1 (no. 1), a=9.860(1) Å, b=10.320(1) Å, c=10.346(1) Å, α=90.37(2)°, β=118.43(2)°; γ=103.69(2)°, Z=4, R1=0.0314. All synthesized crystals were characteristically twinned by reticular pseudomerohedry with twin law (1 0 0, −0.5 −1 0, −1 0 −1). The crystal structure of Ba2AlSi5N9 was determined from single-crystal X-ray diffraction data of a twinned crystal and confirmed by Rietveld refinement both on X-ray and on neutron powder diffraction data. Statistical distribution Si/Al is corroborated by lattice energy calculations (MAPLE). 29Si and 27Al solid-state NMR are in accordance with the crystallographic results. Ba2AlSi5N9 represents a new type of network structure made up of TN4 tetrahedra (T = Si, Al). Highly condensed layers of dreier rings with nitrogen connecting three neighboring tetrahedral centers occur which are further crosslinked by dreier rings and vierer rings. The dreier rings consist of corner-sharing tetrahedra, whereas some of the vierer rings exhibit two pairs of edge-sharing tetrahedra. In the resulting voids of the network there are eight different Ba2+ sites with coordination numbers between 6 and 10. Thermogravimetric investigations confirmed a thermal stability of Ba2AlSi5N9 up to about 1515°C (He atmosphere). Luminescence measurements on Ba2AlSi5N9:Eu2+ (2 mol % Eu2+) with an excitation wavelength of 450 nm revealed a broadband emission peaking at 584 nm (FWHM=100 nm) originating from dipole-allowed 4f6(7F)5d1 → 4f7(8S7/2) transitions

Improved thermoelectric properties in ceramic composites based on Ca3Co4O9 and Na2Ca2Nb4O13

The oxide materials Ca3Co4O9 and Na2Ca2Nb4O13 were combined in a new ceramic composite with promising synergistic thermoelectric properties. Both compounds show a plate-like crystal shape and similar aspect ratios but the matrix material Ca3Co4O9 with lateral sizes of less than 500 nm is about two orders of magnitude smaller. Uniaxial pressing of the mixed compound powders was used to produce porous ceramics after conventional sintering. Reactions between both compounds and their compositions were thoroughly investigated. In comparison to pure Ca3Co4O9, mixing with low amounts of Na2Ca2Nb4O13 proved to be beneficial for the overall thermoelectric properties. A maximum figure-of-merit of zT = 0.32 at 1073 K and therefore an improvement of about 19% was achieved by the ceramic composites

Temperature dependent resonant X-ray diffraction of single-crystalline Ge2Sb2Te5

The element distribution in the crystal structure of the stable phase of the well-known phase-change material Ge2Sb2Te5 was determined at temperatures up to 471 degrees C using single crystals synthesized by chemical transport reactions. Because of the similar electron count of Sb and Te, the scattering contrast was enhanced by resonant diffraction using synchrotron radiation (beamline ID11, ESRF). A simultaneous refinement on data measured at the K-absorption edges of Sb and Te as well as at additional wavelengths off the absorption edges yielded reliable occupancy factors of each element on each position (a = 4.2257(2) angstrom, c = 17.2809(18) angstrom, P (3) over bar m1, R-1 (overall) = 0.037). The dispersion correction terms Delta f' were refined and match experimental ones obtained from fluorescence spectra by the Kramers-Kronig transform. The structure contains distorted rocksalt-type blocks of nine alternating cation and anion layers, respectively, which are separated by van der Waals gaps between Te atom layers. Ge atoms prefer the cation positions near the center of the rocksalt-type block (occupancy factors Ge0.60(4)Sb0.36(2)), Sb atoms the one near the van der Waals gap (Ge0.33(7)Sb0.66(4)). Anti-site disorder is not significant. During heating up to 471 degrees C and subsequent cooling, a reversible structural distortion was observed. The refinements show that with increasing temperature the first pair of anion and cation layers next to the van der Waals gap becomes slightly detached from the block and increasingly resembles a GeTe-type layer. Thus, the difference between interatomic distances in the 3 + 3 cation coordination sphere of the mixed Ge-Sb position next to the gap becomes more pronounced. The element distribution, in contrast, neither changes during the heating experiment nor upon long-time annealing. Thus, the behavior of 9P-Ge2Sb2Te5 single crystals is predominantly under thermodynamic control