Red mud-blast furnace slag-based alkali-activated materials

The aluminum Bayer production process is widespread all over the world. One of the waste products of the Bayer process is a basic aluminosilicate bauxite residue called red mud. The aluminosilicate nature of red mud makes it suitable as a precursor for alkali-activated materials. In this work, red mud was mixed with different percentages of blast furnace slag and then activated by sodium silicate solution at different SiO2/Na2O ratios. Obtained samples were characterized by chemical–physical analyses and compressive strength determination. Very high values of compressive strength, up to 50 MPa, even for high percentage of red mud in the raw mixture (70 wt.% of RM in powder mixture), were obtained. In particular, the higher compressive strength was measured for cubic samples containing 50 wt.% of RM, which showed a value above 70 MPa. The obtained mixtures were characterized by no or scarce environmental impact and could be used in the construction industry as an alternative to cementitious and ceramic materials

Fibre-reinforced geopolymer concretes for sensible heat thermal energy storage: Simulations and environmental impact

Power plants based on solar energy are spreading to accomplish the incoming green energy transition. Besides, affordable high-temperature sensible heat thermal energy storage (SHTES) is required. In this work, the temperature distribution and thermal performance of novel solid media for SHTES are investigated by finite element method (FEM) modelling. A geopolymer, with/without fibre reinforcement, is simulated during a transient charging/discharging cycle. A life cycle assessment (LCA) analysis is also carried out to investigate the environmental impact and sustainability of the proposed materials, analysing the embodied energy, the transport, and the production process. A Multi-Criteria Decision Making (MCDM) with the Analytical Hierarchy Process (AHP) approach, taking into account thermal/environmental performance, is used to select the most suitable material. The results show that the localized reinforcement with fibres increases thermal storage performance, depending on the type of fibre, creating curvatures in the temperature profile and accelerating the charge/discharge. High-strength, high-conductivity carbon fibres performed well, and the simulation approach can be applied to any fibre arrangement/material. On the con-trary, the benefit of the fibres is not straightforward according to the three different scenarios developed for the LCA and MCDM analyses, due to the high impact of the fibre production processes. More investigations are needed to balance and optimize the coupling of the fibre material and the solid medium to obtain high thermal performance and low impacts

Alkali-Activated Red Mud and Construction and Demolition Waste-Based Components: Characterization and Environmental Assessment

The aluminum Bayer production process is the most diffused process in the world, but it creates a high amount of basic waste material known as red mud (RM). The use of RM as a precursor of alkali-activated materials is one of the best opportunities for both the ecosystem and the economy. In the present work, mortar samples were obtained by alkali activation of RM with various percentages of blast-furnace slag (BFS) and inert construction and demolition sands. This process creates samples that have a low environmental impact and that can be used as an alternative in the construction industry to cement materials or ceramic ones. The development of these new materials could also represent a way to reduce the CO2 emissions linked to cement and ceramic brick production. In the present study, cubic 40 mm samples reported very interesting values in compressive strength, with a maximum of about 70 MPa for low environmental impact mortars. With such a material, it is possible to create solid bricks for structural use and concrete tiles for road paving or use it for other purposes. Mortar specimens were prepared and characterized, and an LCA analysis with a “cradle-to-gate” approach was carried out for a comparison of the environmental impact of the studied mortars with other materials currently marketed

A General Process-Based Model for Describing the Metabolic Shift in Microbial Cell Cultures

The metabolic shift between respiration and fermentation at high glucose concentration is a widespread phenomenon in microbial world, and it is relevant for the biotechnological exploitation of microbial cell factories, affecting the achievement of high-cell-densities in bioreactors. Starting from a model already developed for the yeast Saccharomyces cerevisiae, based on the System Dynamics approach, a general process-based model for two prokaryotic species of biotechnological interest, such as Escherichia coli and Bacillus subtilis, is proposed. The model is based on the main assumption that glycolytic intermediates act as central catabolic hub regulating the shift between respiratory and fermentative pathways. Furthermore, the description of a mixed fermentation with secondary by-products, characteristic of bacterial metabolism, is explicitly considered. The model also represents the inhibitory effect on growth and metabolism of self-produced toxic compounds relevant in assessing the late phases of high-cell density culture. Model simulations reproduced data from experiments reported in the literature with different strains of non-recombinant and recombinant E. coli and B. subtilis cultured in both batch and fed-batch reactors. The proposed model, based on simple biological assumptions, is able to describe the main dynamics of two microbial species of relevant biotechnological interest. It demonstrates that a reductionist System Dynamics approach to formulate simplified macro-kinetic models can provide a robust representation of cell growth and accumulation in the medium of fermentation by-products

Mid-Infrared Bloch Surface Waves for biosensing applications

We report on the design, fabrication, and spectroscopic characterization of a 1D Photonic Cristal (1DPC) sustaining Bloch Surface Waves (BSWs) in the mid-infrared. The reported all-dielectric 1DPC structure shows potential for label-free biosensing applications to medical diagnostics

Label-free and fluorescence biosensing platform using one dimensional photonic crystal chips

The increasing demand for early detection of diseases drives the efforts to develop more and more sensitive techniques to detect biomarkers in extremely low concentrations. Electromagnetic modes at the surface of one dimensional photonic crystals, usually called Bloch surface waves, were demonstrated to enhance the resolution and constitute an attractive alternative to surface plasmon polariton optical biosensors. We report on the development of Bloch surface wave biochips operating in both label-free and fluorescence modes and demonstrate their use in ovalbumin recognition assays

Study of fluid dynamics at the boundary wall of a microchannel by Bloch surface waves

Understanding how a fluid flows at the boundaries when it is confined at the microscale/nanoscale is crucial for a broad range of engineering and biology applications. We propose an experimental technique based on Bloch surface waves sustained by a one-dimensional photonic crystal to evaluate the speed of the contact line, i.e., the triple junction separating three phases, in the low Reynold’s number regime, and with a nanometric resolution. Here, we report on the experimental characterization of the translatory motion of the contact line that separates two water solutions with a relatively high refractive index mismatch (7.35×10−3) and its slipping over a solid surface. The advantages are the relative simplicity and economy of the experimental configuration

Geopolymer-based hybrid foams: Lightweight materials from a sustainable production process

The construction industry causes significant environmental impacts in terms of global warming and embodied energy consumption. Concrete is one of the most widely used product in the planet. The development of new materials as alternative to cement could lay the foundations for introducing on the market innovative systems with higher performances and lower environmental impacts. The present research investigates, through a life cycle approach, the environmental impacts of the production process of aerated systems based on innovative Geopolymer-based Hybrid Foams (GHF), choosing as system boundary the method “cradle to gate”. The environmental impacts of GHF derived from fly ash (GHF-FA) were compared to GHF based on metakaolin (GHF-MK) and commercial Aerated Autoclaved Concrete (AAC) system. The main result shows that GHF-FA has the lowest environmental impact (in terms of CO2 production), thus it appears as an environmentally friendly material

Development of Geopolymer-Based Materials with Ceramic Waste for Artistic and Restoration Applications

This contribution presents the preparation and characterization of new geopolymer-based mortars obtained from recycling waste deriving from the production process and the “end-of-life” of porcelain stoneware products. Structural, morphological, and mechanical studies carried out on different kinds of mortars prepared by using several types of by-products (i.e., pressed burnt and extruded ceramic waste, raw pressed and gypsum resulting from exhausted moulds) point out that these systems can be easily cast, also in complex shapes, and show a more consistent microstructure with respect to the geopolymer paste, with a reduced amount of microcracks. Moreover, the excellent adhesion of these materials to common substrates such as pottery and earthenware, even for an elevated concentration of filler, suggests their use in the field of technical-artistic value-added applications, such as restoration, conservation, and/or rehabilitation of historic monuments, or simply as materials for building revetments. For all these reasons, the proposed materials could represent valuable candidates to try to overcome some problems experienced in the cultural heritage sector concerning the selection of environmentally friendly materials that simultaneously meet art and design technical requirements

Sustainable Materials Based on Geopolymer–Polyvinyl Acetate Composites for Art and Design Applications

The recent introduction of the Next Generation EU packages on the circular economy and the Italian Ecological Transition Plan has further boosted the research of effective routes to design materials with low energy and low environmental impact, in all areas of research, including art and design and cultural heritage. In this work, we describe for the first time the preparation and characterization of a new sustainable adhesive material to be used in the art and design sector, consisting of a geopolymer-based composite with polyvinyl acetate (PVAc), both considered more environmentally acceptable than the analogous inorganic or polymeric materials currently used in this sector. The key idea has been the development of organic–inorganic composites by reacting low molecular weight polymers with the geopolymer precursor to obtain a material with reduced brittleness and enhanced adhesion with common substrates. Structural, morphological, and mechanical studies pointed out the consistent microstructure of the composite materials if compared to the neat geopolymer, showing lower density (up to 15%), improved flexural strength (up to 30%), similar water absorption and a relevant toughening effect (up to 40%). Moreover, the easy pourability in complex shapes and the excellent adhesion of these materials to common substrates suggest their use as materials for restoration, rehabilitation of monuments, and decorative and architectural intervention. The organic–inorganic nature of these new materials also makes them easily recognizable from the support on which they are used, favoring, in line with the dictates of good restoration practices, their possible complete removal. For all these reasons, these new materials could represent promising candidates to overcome the limits related to the creative industry for what concerns the selection of environmentally friendly materials to meet design requirements with low environmental impacts