Pulmonary Embolism Revealing Idiopathic Membranous Glomerulonephritis

We describe a case of a 55-year-old man who presented with pulmonary embolism and who was found to have nephrotic syndrome due to idiopathic membranous nephropathy. There are no other signs of nephrotic syndrome such as edema

Chemical auxiliaries free dyeing of cationized cotton with 1:2 metal complex dye

Application of 1:2 metal complex dyes on pre-cationized cotton has been studied. This unconventional process avoids the use of electrolyte required as exhausting agent in conventional dyeing of cotton fabric. Indeed, when we use a large amount of salt, the discharged wastewater from dye house creates unavoidable environmental threats. The dyeing has been carried out at the liquor ratio of 1:40 in a sealed stainless steel dyebath housed on the Ahiba Nuance speed varying temperature, contact time and sulphate concentration. Optimal conditions are determined using the experimental designs method. The results show the possibility of chemical auxiliaries free dyeing of cotton fabrics with 1:2 metal complex dye at 75°C for 15 min by treating them with cationizer prior to dyeing. Adsorption kinetic and isotherm are also studied and the parallel exponential model is shown to fit experimental data with higher average regression coefficients

Reversible dilated cardiomyopathy caused by hypothyroidism

The association between lack of thyroid hormones and cardiac dysfunction has been well described. We report two new cases of patients with dilated cardiomyopathy (DCM), revealing a periphery hypothyroidism and for whom cardiac function significantly improved after L thyroxin substitutive treatment. Our cases highlight the necessity to perform thyroid function testing to investigate the etiology of non ischemic DCM

Elaboration and Characterization of Recycled PP/Clay Nanocomposites

In this paper, the elaboration and characterization of recycled polypropylene/Tunisian clay nanocomposites has been investigated. When recycled, polypropylene polymer is degraded and has poorer mechanical and rheological properties. To overcome this problem, we proposed to incorporate Tunisian clay nanoparticles in recycled polypropylene (rPP) matrix. The incorporation of Tunisian clay was performed in molten state using maleic anhydride grafted polypropylene (PP-g-MA) as compatibilizer. The dispersion of clay in rPP polymer was evaluated by scanning electron microscopy and Fourier transformed infrared spectroscopy. Thus, Tunisian clay was more dispersed in nanocomposites with the increase of Tunisian clay loading. In dead, the incorporation of silicate layers gave rise to a considerable increase of the static viscosity demonstrating the reinforcing effect of Tunisian clay nanofillers on rPP matrix. However, the increasing trend of morphological and rheological properties is lower when the clay content exceeds 5%

Reinforcement of recycled PP polymers by nanoparticles incorporation

Recycling process seems to be the most efficient way to reduce ecological impacts of used polymers. Nevertheless, the properties of the recycled PP polymer are proved to be insufficient during its reuse, particularly with regard to its thermo-mechanical and rheological behaviors. The incorporation of nanoparticles as fillers into polymer matrix seems to be one of the most successful solutions to upgrade recycled PP polymer. This paper presents an overview on the application of different nanofillers such as clay, calcium carbonate (CaCO3), Silica (SiO2), Zinc Oxide (ZnO), carbon black (CB), carbon nanotubes (CNT), antioxidizers and others into recycled PP matrix. Literature works on the effects of nanofillers on obtained nanocomposites are extensively studied. The first section deals with PP recycling and its impact on thermal, mechanical and rheological properties of the polymer. Then, the second part summarizes recent studies on the effects of nanoparticles incorporation on thermo-mechanical and rheological properties of recycled PP. Finally, recyclability of PP-based nanocomposites is discussed