Micrometer-Thin Crystalline-Silicon Solar Cells Integrating Numerically Optimized 2-D Photonic Crystals

A 2-D photonic crystal was integrated experimentally into a thin-film crystalline-silicon solar cell of 1-{\mu}m thickness, after numerical optimization maximizing light absorption in the active material. The photonic crystal boosted the short-circuit current of the cell, but it also damaged its open-circuit voltage and fill factor, which led to an overall decrease in performances. Comparisons between modeled and actual optical behaviors of the cell, and between ideal and actual morphologies, show the global robustness of the nanostructure to experimental deviations, but its particular sensitivity to the conformality of the top coatings and the spread in pattern dimensions, which should not be neglected in the optical model. As for the electrical behavior, the measured internal quantum efficiency shows the strong parasitic absorptions from the transparent conductive oxide and from the back-reflector, as well as the negative impact of the nanopattern on surface passivation. Our exemplifying case, thus, illustrates and experimentally confirms two recommendations for future integration of surface nanostructures for light trapping purposes: 1) the necessity to optimize absorption not for the total stack but for the single active material, and 2) the necessity to avoid damage to the active material by pattern etching.Comment: Authors' postprint version - Editor's pdf published online on Nov.

Absorbing photonic crystals for thin film photovoltaics

The absorption of thin hydrogenated amorphous silicon layers can be efficiently enhanced through a controlled periodic patterning. Light is trapped through coupling with photonic Bloch modes of the periodic structures, which act as an absorbing planar photonic crystal. We theoretically demonstrate this absorption enhancement through one or two dimensional patterning, and show the experimental feasibility through large area holographic patterning. Numerical simulations show over 50% absorption enhancement over the part of the solar spectrum comprised between 380 and 750nm. It is experimentally confirmed by optical measurements performed on planar photonic crystals fabricated by laser holography and reactive ion etching.Comment: 6 pages. SPIE Photonics Europe pape

Optical manipulation of the wave function of quasiparticles in a solid

Polaritons in semiconductor microcavities are hybrid quasiparticles consisting of a superposition of photons and excitons. Due to the photon component, polaritons are characterized by a quantum coherence length in the several micron range. Owing to their exciton content, they display sizeable interactions, both mutual and with other electronic degrees of freedom. These unique features have produced striking matter wave phenomena, such as Bose-Einstein condensation, or parametric processes able to generate quantum entangled polariton states. Recently, several paradigms for spatial confinement of polaritons in semiconductor devices have been established. This opens the way to quantum devices in which polaritons can be used as a vector of quantum information. An essential element of each quantum device is the quantum state control. Here we demonstrate control of the wave function of confined polaritons, by means of tailored resonant optical excitation. By tuning the energy and momentum of the laser, we achieve precise control of the momentum pattern of the polariton wave function. A theoretical model supports unambiguously our observations

Fabrication and Characterisation of Photonic Crystal Amorphous Silicon Photovoltaic Cells

International audienc

Coherence properties of polaritons in semiconductor microcavities

In this work we present the coherent control of polariton parametric scattering with weak phase locked probe pulses. It is demonstrated that the signal emission arising from the parametric scattering is completely coherent for moderate excitation power, whereas at high pump density the dynamics appears less coherent due to the depletion of the pump polariton reservoir. It is furthermore demonstrated that the phase of the probe pulses controls the emission from signal, pump, and idler at the same time

Design and Simulation of 2D Photonic Crystal Thin Film Photovoltaic, Cells

International audienc

Design and Simulation of 2D Photonic Crystal Thin Film Photovoltaic, Cells

International audienc

Front side plasmonic effect on thin silicon epitaxial solar cells

We study the effect of metal nanoparticles, showing localised plasmonic resonances, on the spectrally resolved efficiency of thin film crystalline silicon solar cells. We investigate model structures: silver (Ag) nanodiscs on the surface of epitaxial cells grown on highly doped silicon substrates, with a controlled micron-scale thickness. The cells have no back reflector in order to exclusively study the effect of the front surface on their optical properties. The nanodiscs were deposited through hole-mask colloidal lithography, which is a low-cost, bottom-up and extremely versatile technique. As opposed to many other works, we use as benchmarks both bare silicon cells and cells with a dielectric antireflection coating. We optically observe a resonance showing an absorption increase, found to be controllable by the discs parameters. We also see an increase in short-circuit current with respect to bare cells, but we see a decrease in efficiency with respect to cells with a dielectric antireflection coating, due to losses at short wavelengths. As the material properties are not notably affected by the particles deposition, we show that the main loss mechanisms are an important parasitic absorption in the nanoparticles and destructive interferences

Broadband absorption enhancement in ultra-thin crystalline Si solar cells by incorporating metallic and dielectric nanostructures in the back reflector

We propose a back reflecting scheme in order to enhance the maximum achievable current in one micron thick crystalline silicon solar cells. We perform 3D numerical investigations of the scattering properties of metallic nanostructures located at the back side and optimize them for enhancing absorption in the silicon layer. We validate our numerical results experimentally and also compare the absorption enhancement in the solar cell structure, both with quasi-periodic and random metallic nanostructures. We have looked at the interplay between the metallic nanostructures and an integrated back reflector. We show that the combination of metallic nanoparticles and a metallic reflector results in significant parasitic absorption. We compared this to another implementation based on titanium dioxide nanoparticles, which act as a Lambertian reflector of light. Our simulation and experimental results show that this proposed configuration results in reduced absorption losses and in broadband enhancement of absorption for ultra-thin solar cells, paving the way to an optimal back reflector for thin film photovoltaics