Hazard analysis and critical control point plan for hazards in Ugandan amaranth vegetable value chain

Currently, there is a high demand for amaranth due to its ability to withstand harsh climatic conditions, making it an ideal crop in the changing climate. There is also increased awareness and education on its nutritional and overall health benefits, and the availability of improved recipes. However, the presence of hazards can hinder the commercialisation of amaranth, which is in most cases traded informally. Food safety issues along the amaranth value chain should, therefore, be addressed to cope with both production and safety demands. The objective of this study, therefore, was to develop a Hazard Analysis and Critical Control Point (HACCP) plan for hazards in the amaranth value chain in Uganda. The seven principles outlined by Codex Alimentarius were followed to develop the HACCP plan. A tree diagram was further used to identify each potential hazard at each processing stage and Critical Control Points (CCPs) along the chain. For the CCPs identified, reliable control mechanisms and corrective actions were established to fulfil the requirements set by the critical limits to guarantee the safety of the products. Verification and records systems were proposed to determine the effectiveness and traceability of the HACCP plan. For each of the identified CCPs, samples were collected purposively and analysed for chemical and microbial contaminants. From the analysis, fifteen processing stages, starting from the land section to cooking and serving, were identified. Out of these, eight stages were defined as CCPs. These were site selection, land and seedbed preparation, irrigation, market display/humidity control, washing before preparation, chopping, cooking, and holding time and serving. At CCP 1, soils were contaminated with lead and cadmium, mercury and aflatoxins but at considerably low levels. At CCP 2, organic fertilisers were only contaminated with E. coli. At CCP3, E. coli was present in irrigation water. Heavy metals were also present in the irrigation water but were below the critical limits. At CCP4, E. coli was absent in water and display surfaces. E. coli was, however, present on raw amaranth. S. aureus was detected on vendors’ hands. At CCP5, water was not contaminated with E. coli. At CCP6, only personnel hands were infected with S. aureus and Enterobacteriaceae. No contamination was detected in CCP7 and CCP8. Strict control of E. coli in manure and water and S. aureus and Enterobacteriaceae on personnel hands is required to ensure the amaranth value chain attains good food safety output.Keywords: Amaranth, food safety, prerequisite programs, HACCP plan, hazards, Ugand

Plasmodium falciparum Hep1 is required to prevent the self aggregation of PfHsp70-3

The majority of mitochondrial proteins are encoded in the nucleus and need to be imported from the cytosol into the mitochondria, and molecular chaperones play a key role in the efficient translocation and proper folding of these proteins in the matrix. One such molecular chaperone is the eukaryotic mitochondrial heat shock protein 70 (Hsp70); however, it is prone to self-aggregation and requires the presence of an essential zinc-finger protein, Hsp70-escort protein 1 (Hep1), to maintain its structure and function. PfHsp70-3, the only Hsp70 predicted to localize in the mitochondria of P. falciparum, may also rely on a Hep1 orthologue to prevent self-aggregation. In this study, we identified a putative Hep1 orthologue in P. falciparum and co-expression of PfHsp70-3 and PfHep1 enhanced the solubility of PfHsp70-3. PfHep1 suppressed the thermally induced aggregation of PfHsp70-3 but not the aggregation of malate dehydrogenase or citrate synthase, thus showing specificity for PfHsp70-3. Zinc ions were indeed essential for maintaining the function of PfHep1, as EDTA chelation abrogated its abilities to suppress the aggregation of PfHsp70-3. Soluble and functional PfHsp70-3, acquired by co-expression with PfHep-1, will facilitate the biochemical characterisation of this particular Hsp70 protein and its evaluation as a drug target for the treatment of malaria

Development of a food safety toolkit for dry common beans (Phaseolus vulgaris l.) in Uganda using a Hazard Analysis and Critical Control Point (HACCP) approach

Common beans (Phaseolus vulgaris L) may be contaminated with heavy metals and aflatoxins. Cooked beans may also be contaminated with micro-organisms due to poor hygiene and sanitation practices. Hazard Analysis and Critical Control Point (HACCP), which is a globally recognised food safety program, was proposed as a suitable program to minimise/eliminate the risk of contamination. Therefore, the objective of this study was to develop a HACCP plan for dry common beans in Uganda and an accompanying food safety toolkit. The seven principles of HACCP as outlined by Codex Alimentarius were followed to develop a HACCP plan for the dry common beans value chain in Uganda. A decision tree diagram was further used to identify each potential hazard at each processing stage and Critical Control Points (CCPs) along the chain. The identification of the CCPs was further supported by an evaluation of the actual risk and severity of the hazard. For the CCP identified, reliable control mechanism and corrective actions were established to fulfill the requirements set by the critical limits to guarantee the safety of the products. Verification and records systems were proposed to determine the effectiveness and traceability of the HACCP plan. For identified CCPs, a co-creation methodology was used to develop the food safety toolkit. This was carried out in four sessions that included a background of the chain actors’ ambitions to determine the suitability of the toolkit, assessment of CCPs, expert advice on the CCP and an exercise to develop concepts for each CCP. From the analysis, fourteen processing stages starting from land selection to cooking and serving were identified. Out of these, four stages were CCPs. These were land selection and preparation, storage, post-harvest drying, and cooking and serving. Hazards at the CCPs included heavy metals, mycotoxins, and micro-organisms such as S. aureus, E. coli, and Salmonella spp. A combination of good hygiene and sanitation practices and good agricultural practices were recommended as control measures against the hazards. To further equip the value chain actors with mitigation strategies, a food safety toolkit whose usefulness is to give the actors a systematic means to control identified CCPs was developed. In this regard, the toolkit and HACCP plan will complement each other. From the study results, implementation of the toolkit, followed by an assessment of its uptake and impact on livelihoods and food safety risks is recommended

Hazard analysis and critical control point plan for hazards in Ugandan amaranth vegetable value chain

Currently, there is a high demand for amaranth due to its ability to withstand harsh climatic conditions, making it an ideal crop in the changing climate. There is also increased awareness and education on its nutritional and overall health benefits, and the availability of improved recipes. However, the presence of hazards can hinder the commercialisation of amaranth, which is in most cases traded informally. Food safety issues along the amaranth value chain should, therefore, be addressed to cope with both production and safety demands. The objective of this study, therefore, was to develop a Hazard Analysis and Critical Control Point (HACCP) plan for hazards in the amaranth value chain in Uganda. The seven principles outlined by Codex Alimentarius were followed to develop the HACCP plan. A tree diagram was further used to identify each potential hazard at each processing stage and Critical Control Points (CCPs) along the chain. For the CCPs identified, reliable control mechanisms and corrective actions were established to fulfil the requirements set by the critical limits to guarantee the safety of the products. Verification and records systems were proposed to determine the effectiveness and traceability of the HACCP plan. For each of the identified CCPs, samples were collected purposively and analysed for chemical and microbial contaminants. From the analysis, fifteen processing stages, starting from the land section to cooking and serving, were identified. Out of these, eight stages were defined as CCPs. These were site selection, land and seedbed preparation, irrigation, market display/humidity control, washing before preparation, chopping, cooking, and holding time and serving. At CCP 1, soils were contaminated with lead and cadmium, mercury and aflatoxins but at considerably low levels. At CCP 2, organic fertilisers were only contaminated with E. coli. At CCP3, E. coli was present in irrigation water. Heavy metals were also present in the irrigation water but were below the critical limits. At CCP4, E. coli was absent in water and display surfaces. E. coli was, however, present on raw amaranth. S. aureus was detected on vendors’ hands. At CCP5, water was not contaminated with E. coli. At CCP6, only personnel hands were infected with S. aureus and Enterobacteriaceae. No contamination was detected in CCP7 and CCP8. Strict control of E. coli in manure and water and S. aureus and Enterobacteriaceae on personnel hands is required to ensure the amaranth value chain attains good food safety output

VISCERAL LEISHMANIASIS WITH CONCOMITTANT POST KALA-AZAR DERMAL LEISHMANIASIS RESPONDS TO ORAL SITAMAQUINE: CASE REPORT

SUMMARYWe report a rare case of visceral leishmanisis with concomitant post kala-azar dermalleishmaniasis as the initial presentation in a female patient from Baringo district, Rift valleyprovince, Kenya