91 research outputs found

    Decentralized Greedy-Based Algorithm for Smart Energy Management in Plug-in Electric Vehicle Energy Distribution Systems

    Get PDF
    Variations in electricity tariffs arising due to stochastic demand loads on the power grids have stimulated research in finding optimal charging/discharging scheduling solutions for electric vehicles (EVs). Most of the current EV scheduling solutions are either centralized, which suffer from low reliability and high complexity, while existing decentralized solutions do not facilitate the efficient scheduling of on-move EVs in large-scale networks considering a smart energy distribution system. Motivated by smart cities applications, we consider in this paper the optimal scheduling of EVs in a geographically large-scale smart energy distribution system where EVs have the flexibility of charging/discharging at spatially-deployed smart charging stations (CSs) operated by individual aggregators. In such a scenario, we define the social welfare maximization problem as the total profit of both supply and demand sides in the form of a mixed integer non-linear programming (MINLP) model. Due to the intractability, we then propose an online decentralized algorithm with low complexity which utilizes effective heuristics to forward each EV to the most profitable CS in a smart manner. Results of simulations on the IEEE 37 bus distribution network verify that the proposed algorithm improves the social welfare by about 30% on average with respect to an alternative scheduling strategy under the equal participation of EVs in charging and discharging operations. Considering the best-case performance where only EV profit maximization is concerned, our solution also achieves upto 20% improvement in flatting the final electricity load. Furthermore, the results reveal the existence of an optimal number of CSs and an optimal vehicle-to-grid penetration threshold for which the overall profit can be maximized. Our findings serve as guidelines for V2G system designers in smart city scenarios to plan a cost-effective strategy for large-scale EVs distributed energy management

    Nitrogen incorporation and optical studies of GaAsSbN/GaAs single quantum weil heterostructures

    Get PDF
    Cataloged from PDF version of article.In this work, the effects of N incorporation on the optical properties of GaAsSbN/GaAs single quantum wells (SQWs) have been investigated using temperature, excitation, and magnetic dependencies of photoluminescence (PL) characteristics. These layers were grown in an elemental solid source molecular beam epitaxy system with a rf plasma N source. The N concentrations in the range of 0.5%-2.5% were investigated in this study. The SQW with N similar to 0.5% exhibits a behavior similar to that in an intermediate regime where the contributions from the localized states in the band gap are dominant. The temperature and excitation dependencies of the PL characteristics indicate that for the N concentration of 0.9% and above, the alloy behavior is analogous to that of a regular alloy and the changes in optical properties are only marginal. The conduction band effective mass (m(eff)) values computed from the magnetophotoluminescence spectra using a variational formalism and the band anticrossing model are in good agreement and indicate enhanced values of m(eff). However, there is no significant variation in m(eff) values of QWs for N >= 0.9%. Small redshift of about 30-50 meV for the temperature variations from 10 to 300 K in conjunction with unusually small blueshift observed in the excitation dependence of PL for N >= 0.9% indicate that this system holds a great promise for laser applications at 1.55 mu m and beyond

    Emission-aware Energy Storage Scheduling for a Greener Grid

    Full text link
    Reducing our reliance on carbon-intensive energy sources is vital for reducing the carbon footprint of the electric grid. Although the grid is seeing increasing deployments of clean, renewable sources of energy, a significant portion of the grid demand is still met using traditional carbon-intensive energy sources. In this paper, we study the problem of using energy storage deployed in the grid to reduce the grid's carbon emissions. While energy storage has previously been used for grid optimizations such as peak shaving and smoothing intermittent sources, our insight is to use distributed storage to enable utilities to reduce their reliance on their less efficient and most carbon-intensive power plants and thereby reduce their overall emission footprint. We formulate the problem of emission-aware scheduling of distributed energy storage as an optimization problem, and use a robust optimization approach that is well-suited for handling the uncertainty in load predictions, especially in the presence of intermittent renewables such as solar and wind. We evaluate our approach using a state of the art neural network load forecasting technique and real load traces from a distribution grid with 1,341 homes. Our results show a reduction of >0.5 million kg in annual carbon emissions -- equivalent to a drop of 23.3% in our electric grid emissions.Comment: 11 pages, 7 figure, This paper will appear in the Proceedings of the ACM International Conference on Future Energy Systems (e-Energy 20) June 2020, Australi

    Optical studies of molecular beam epitaxy grown GaAsSbNGaAs single quantum well structures

    Get PDF
    In this work, the authors present a systematic study on the variation of the structural and the optical properties of GaAsSbNGaAs single quantum wells (SQWs) as a function of nitrogen concentration. These SQW layers were grown by the solid source molecular beam epitaxial technique. A maximum reduction of 328 meV in the photoluminescence (PL) peak energy of GaAsSbN was observed with respect to the reference GaAsSb QW. 8 K and RT PL peak energies of 0.774 eV (FWHM of ∼25 meV) and 0.729 eV (FWHM of ∼67 meV) (FWHM denotes full width at half maximum) corresponding to the emission wavelengths of 1.6 and 1.7 μm, respectively, have been achieved for a GaAsSbN SQW of N∼1.4%. The pronounced S -curve behavior of the PL spectra at low temperatures is a signature of exciton localization, which is found to decrease from 16 to 9 meV with increasing N concentration of 0.9%-2.5%. The diamagnetic shift of 13 meV observed in the magnetophotoluminescence spectra of the nitride sample with N∼1.4% is smaller in comparison to the value of 28 meV in the non-nitride sample, indicative of an enhancement in the electron effective mass in the nitride QWs. Electron effective mass of 0.065 mo has been estimated for a SQW with N∼1.4% using the band anticrossing model. © 2007 American Vacuum Society

    Abrasive water jet drilling of advanced sustainable bio-fibre-reinforced polymer/hybrid composites : a comprehensive analysis of machining-induced damage responses

    Get PDF
    This paper aims at investigating the effects of variable traverse speeds on machining-induced damage of fibre-reinforced composites, using the abrasive water jet (AWJ) drilling. Three different types of epoxy-based composites laminates fabricated by vacuum bagging technique containing unidirectional (UD) flax, hybrid carbon-flax and carbon fibre-reinforced composite were used. The drilling parameters used were traverse speeds of 20, 40, 60 and 80 mm/min, constant water jet pressure of 300 MPa and a hole diameter of 10 mm. The results obtained depict that the traverse speed had a significant effect with respect to both surface roughness and delamination drilling-induced damage responses. Evidently, an increase in water jet traverse speed caused an increase in both damage responses of the three samples. Significantly, the CFRP composite sample recorded the lowest surface roughness damage response, followed by C-FFRP, while FFRP exhibited the highest. However, samples of FFRP and hybrid C-FFRP recorded lowest and highest delamination damage responses, respectively. The discrepancy in both damage responses, as further validated with micrographs of colour video microscopy (CVM), scanning electron microscopy (SEM) and X-ray micro-computed tomography (X-ray μCT), is attributed to the different mechanical properties of the reinforced fibres, fibre orientation/ply stacking and hybridisation of the samples.Peer reviewe

    Rewriting DNA Methylation Signatures at Will:The Curable Genome Within Reach?

    Get PDF
    DNA methyltransferases are important enzymes in a broad range of organisms. Dysfunction of DNA methyltransferases in humans leads to many severe diseases, including cancer. This book focuses on the biochemical properties of these enzymes, describing their structures and mechanisms in bacteria, humans and other species, including plants, and also explains the biological processes of reading of DNA methylation and DNA demethylation. It covers many emerging aspects of the biological roles of DNA methylation functioning as an essential epigenetic mark and describes the role of DNA methylation in diseases. Moreover, the book explains modern technologies, like targeted rewriting of DNA methylation by designed DNA methyltransferases, as well as technological applications of DNA methyltransferases in DNA labelling. Finally, the book summarizes recent methods for the analysis of DNA methylation in human DNA. Overall, this book represents a comprehensive state-of-the-art- work and is a must-have for advanced researchers in the field of DNA methylation and epigenetics

    Mechanistic insights into p53‐regulated cytotoxicity of combined entinostat and irinotecan against colorectal cancer cells

    Get PDF
    Late‐stage colorectal cancer (CRC) is still a clinically challenging problem. The activity of the tumor suppressor p53 is regulated via post‐translational modifications (PTMs). While the relevance of p53 C‐terminal acetylation for transcriptional regulation is well defined, it is unknown whether this PTM controls mitochondrially mediated apoptosis directly. We used wild‐type p53 or p53‐negative human CRC cells, cells with acetylation‐defective p53, transformation assays, CRC organoids, and xenograft mouse models to assess how p53 acetylation determines cellular stress responses. The topoisomerase‐1 inhibitor irinotecan induces acetylation of several lysine residues within p53. Inhibition of histone deacetylases (HDACs) with the class I HDAC inhibitor entinostat synergistically triggers mitochondrial damage and apoptosis in irinotecan‐treated p53‐positive CRC cells. This specifically relies on the C‐terminal acetylation of p53 by CREB‐binding protein/p300 and the presence of C‐terminally acetylated p53 in complex with the proapoptotic BCL2 antagonist/killer protein. This control of C‐terminal acetylation by HDACs can mechanistically explain why combinations of irinotecan and entinostat represent clinically tractable agents for the therapy of p53‐proficient CRC
    corecore